My iPad camera connection kit says "Cannot Use Device. The connected device is not supported."

This error displays on every single SD card I connect and none of them work. This has worked fine for months now, but until a few days ago, it has stopped working. I believe it could have been a recent update but I am not sure. I need to import images from my camera but I do not have the USB Camera Connector.

Welcome to the Apple Community.
I'd check your HDMI cable is seated correctly at each end to begin with, pull it out and put it in again, if that doesn't help...
Please tell us how are you trying to play video from the iPad, is it via AirPlay or are you using the iPad to control the Apple TV and at what point is the message displayed.

Similar Messages

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

I have recently purchased the latest ipad. Got to say I am extremely dissapointed that it does not support Java or Flash which are platforms needed to do online business banking. I am now faced with ditching it and replacing it with a competitors product

I have recently purchased the latest ipad. Got to say I am extremely dissapointed that it does not support Java or flash which are platforms needed to do online business banking. I am now faced with ditching an expensive toy for a competitors product that offers full business functionallity. Is there any way round this ? It seems extremely bad form on apples part not to support this or make it very clear of the products limitations at the time of purchase.

Well, my bank has an app but the website does not use Flash or Java. While my credit union doesn't have an app, their website doesn't require Flash or Java either.
I pay all my bills online, bank, and access my brokerage accounts. None of the sites I have encountered require Flash or Java. Some government sites do require Flash so I use Photon, it's a browser that does Flash content very well. So you might check out some alternatives browsers.
Otherwise I suppose you will either dump you bank, your iPad, or just not do online banking.

ORA-13207: incorrect use of the [More than 2D not supported] operator

Oracle 8.1.7.4:
The same query works in an Oracle DB on Linux and Windows, but in a Solaris it gives me the following error:
cc_redes_met_coaxial@ORAG2> SELECT lot_f.lot_id id,
ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0.5),2) dist
FROM lot_f,
pedestal_f,
G_GEOMETRY_0 lot_geom,
2 G_GEOMETRY_0 ped_geom
WHERE lot_f.feat_num = lot_geom.feat_num
3 AND pedestal_f.acc_point_id = 611
AND pedestal_f.feat_num = ped_geom.feat_num
4 AND lot_f.g_version+0 = 0
AND (lot_f.g_next_version > 0 OR lot_f.g_next_version IS NULL)
5 AND pedestal_f.g_version+0 = 0
6 AND (pedestal_f.g_next_version > 0 OR pedestal_f.g_next_version IS NULL)
AND MDSYS.SDO_WITHIN_DISTANCE(lot_geom.geometry, ped_geom.geometry,'distance = 100' ) = 'TRUE';
7 8 9 10 11 12 13 14 SELECT lot_f.lot_id id,
ERROR at line 1:
ORA-29902: error in executing ODCIIndexStart() routine
ORA-13207: incorrect use of the [More than 2D not supported] operator
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 84
ORA-06512: at line 1
The data is in 3D. I took a look at the trace file but no useful information. It does not have to be 2d, right?
I can use SDO_WITHIN_DISTANCE with data in 3d, can't I?
Does anyone know what is going on? Maybe a bug?
Regards,
Alex

Daniel,
I created the spatial index in 2d, but if I collect stats on all tables the optimizer doesn't use the spatial index.
I tried to influence the optimizer using hints, but it seems to ignore the hint clause. The query I did is above:
SELECT /*+ INDEX(lot_geom G_GEOMETRY_0_SI) INDEX(ped_geom G_GEOMETRY_0_SI) */
lot_f.lot_id id,
ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0.5),2) dist
FROM lot_f,
pedestal_f,
G_GEOMETRY_0 lot_geom,
G_GEOMETRY_0 ped_geom
WHERE lot_f.feat_num = lot_geom.feat_num
AND pedestal_f.acc_point_id = 611
AND pedestal_f.feat_num = ped_geom.feat_num
AND lot_f.g_version+0 = 0
AND (lot_f.g_next_version > 0 OR lot_f.g_next_version IS NULL)
AND pedestal_f.g_version+0 = 0
AND (pedestal_f.g_next_version > 0 OR pedestal_f.g_next_version IS NULL)
AND MDSYS.SDO_WITHIN_DISTANCE(lot_geom.geometry, ped_geom.geometry,
'distance = 100' ) = 'TRUE';
So I "forced" a plan that uses the spatial indexes deleting the statistics from the tables that have geometry columns. The execution plan looks like this:
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=2652 Card=10182 Bytes=79969428)
1 0 CONCATENATION
2 1 NESTED LOOPS (Cost=876 Card=3428 Bytes=26923512)
3 2 NESTED LOOPS (Cost=121 Card=1078 Bytes=8450442)
4 3 NESTED LOOPS (Cost=4 Card=33 Bytes=129492)
5 4 TABLE ACCESS (FULL) OF 'PEDESTAL_F' (Cost=1 Card=1 Bytes=16)
6 4 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=3 Card=3268 Bytes=12771344)
7 6 INDEX (RANGE SCAN) OF 'G_GEOMETRY_0_PRIMARY' (UNIQUE) (Cost=2 Card=3268)
8 3 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=121 Card=3268 Bytes=12794220)
9 8 DOMAIN INDEX OF 'G_GEOMETRY_0_SI' (Cost=51)
10 2 TABLE ACCESS (BY INDEX ROWID) OF 'LOT_F' (Cost=1 Card=318 Bytes=4770)
11 10 INDEX (RANGE SCAN) OF 'GI_LOT_F0_FEAT_NUM_0' (UNIQUE) (Cost=1 Card=318)
12 1 NESTED LOOPS (Cost=876 Card=3428 Bytes=26923512)
13 12 NESTED LOOPS (Cost=121 Card=1078 Bytes=8450442)
14 13 NESTED LOOPS (Cost=4 Card=33 Bytes=129492)
15 14 TABLE ACCESS (FULL) OF 'PEDESTAL_F' (Cost=1 Card=1 Bytes=16)
16 14 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=3 Card=3268 Bytes=12771344)
17 16 INDEX (RANGE SCAN) OF 'G_GEOMETRY_0_PRIMARY' (UNIQUE) (Cost=2 Card=3268)
18 13 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=121 Card=3268 Bytes=12794220)
19 18 DOMAIN INDEX OF 'G_GEOMETRY_0_SI' (Cost=51)
20 12 TABLE ACCESS (BY INDEX ROWID) OF 'LOT_F' (Cost=1 Card=318 Bytes=4770)
21 20 INDEX (RANGE SCAN) OF 'GI_LOT_F0_FEAT_NUM_0' (UNIQUE) (Cost=1 Card=318)
But when I executed the query, I got:
cc_redes_met_coaxial@ORAG2> /
ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0.5),2) dist
ERROR at line 2:
ORA-03113: end-of-file on communication channel
Collecting stats on geometry tables makes the query work only because it doesn't use the spatial index.
I took a look the trace file, but I didn't see any interesting information. I can send you if you want.
Do you have any clue?
Regards,
Alex

HT2513 I have a message that I cannot eliminate. "The Anniversary calendar does not support events". I cannot find any event associated with the anniversary calendar. In fact I have deleted the anniversaries from my calendar. any ideas?y

I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

Get an error message when plugging in a card reader that says "cannot use device. The connected USB device requires too much power".

Is there a way around this?

She has to be using some version of the camera connection kit doesn't she? Only way to get a card reader plugged into an iPad.
if the cards are SD cards, then plugging them directly iinto the camera connection kit is the best way. If they're not SD cards, then you can use the USB attachment to plug your camera directly into the iPad.
If you're using a device beyond the camera or an SD card, some have reported success using a powered USB hub to allow plugging hte camera connection kit to other card readers.
Basically, the USB out of the iPad only puts out a limited amount of power. About a year ago, it put out more and people could plug in card readers and keyboards and even mice, but Apple changed the power configuration so now most things do not work.

Please help. when i plug in my Ipad to Itunes it says cannot use IPad and need 11.1 Itunes version. I thought I had updated Itunes to latest .

I have had my Ipad for about a year and regualrly transfer pictures from my pc to Ipad using ITunes. for some reason when i have tried to do this again the computer comes up with message that I cannot use my IPad as it needs 11.1 version. I have downloaded latest version of Itunes. Pease help as I am pretty hopeless with IT. Thanks

It sounds like you still have to update it.
It's very easy to do. If you have OSX iTunes, go to iTunes>Check for Updates. If you have Windows, go to Help>Check for Updates

The touch feature is not responding. cannot use screen, the touch feature is not responding. cannot use screen

My ipod is frozen. I cannot use the touch screen at all and can't get off of the locked screen or turn it off.

What happens when you try a hard reset? To do this press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock

The disk could not be used because the disc drive is not supported

The internal DVD burner in my G4 died, so I'm trying to use an external DVD drive. However, when I connect it and insert a blank DVD-R, it's ejected and the above error pops up, error code 0x80020025. I tried resetting the PRAM but when I did the screen would just stay black, until I let go of the keys.
I've used the external drive before on another G4 so I know it works, and the DVDs are brand new.
Any ideas.
Thanks

Sorry but your post seems to be misdirected. It has nothing to do with wireless networking nor Windows.
I suggest that you post your question in the appropriate Power Mac G4 discussion area.

TS1315 iPad camera connection kit says SD card needs to be formatted?

iPad camera connection kit says I need to format the SD card for my iPad 2. How do I do this.

Is it an SD, SDHC or SDXC card and what size.? The iPad won't read SDXC cards or cards over 32GB. The usual format is FAT32 (and not ExFAT). Use your camera to format, or your computer.
 Cheers, Tom

I don't have a wireless printer, and want to print things off of my iPad. I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

I don't have a wireless printer, and want to print things off of my iPad. I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

I don't think you can connect a printer since you won't have the printer drivers. I use FingerPrint from collobos.com to print to my non-AirPrint printers.

I got lightning to usb camera adapter but get fault message on ipad mine "cannot use device" the connected usb device requires too much power

I tried to use lightning to usb camera adapter but every time I plug it into my ipad mine it give cannot use device. the connected usb device requires too much power. how could I use this attachment.

Or use the camera's SD card instead.
 Cheers, Tom

HT4101 I have a NIKON COOLPIX P500 but am unable to download photos through the IPad camera connection kit. I have tried to use the Sandisk card also - no result. Any suggestions? The Ipad does not "see" the card or camera?

I have a Nikon Coolpix P500 but am unable to download photos from it to my iPad2 via the iPad Camera Connection kit. The iPad does not see either the Sandisk 8GB card or the Nikon camera. I have turned the camera on, but it seems that the camera just want to recharge its battery through the iPad as the iPad states that the devices draws too much power?? Anybodu solved this problem yet? Advise please?

One thing to check is the format that the camera is saving pics to the card in. Many are selectable and, in most cases, if PTP is one of the options then you need to have that one selected for the files to be visible to iOS and the CCK (connection kit).
Another thing which sometimes comes up, especially with older cameras and therefore probably not with yours, is the filenaming conventions used by the camera. iOS is quite strict about what it expects to see and if files are being stored with unsupported name formats then they simply won't be seen at all.

I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this ang get my all imported folder back?

I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this and get my all imported folder back? as well as get my last import functioning normally?

Please please help me, if you know how.

Apple iPad Camera Connection Kit, can I use it with USB speakers?

I have a speaker system which has a USB connection so can i use Apple iPad Camera Connection Kit to listen to the music from my iphone 4 on to the speakers..will the camera connection kit support it?

The Camera Connection Kit is for connecting a camera or SD card to your iPad and downloading photos. It is not a general USB port addition to your iPad.

My iPad camera connection kit says "Cannot Use Device. The connected device is not supported."

Similar Messages

Maybe you are looking for