My ipad does not appear as a device in itunes when connected (1st time trying to sync). all other apple devices are fine and I have the latest itunes version.
I have a new ipad2 for xmas . I have tried to sync the device to itunes and it is not being seen. I have the latest version of itunes, updated last night, and have several other devices that are seen fine (iphone/ipods).
When I connect the usb direct to the mac iphoto starts but then that is it - itunes will not recognise the device......
I have gone thourgh the suggested support help on the apple website and came to the last point - review community ... so here I am!
What you provided is not everything mentioned.
Your Mac is running 10.5.8 or later and iTunes 10?
You are connecting the iPad direct to a USB port on your Mac and you have tried every port?
You have reinstalled the Apple Mobile Device Service?
If your Mac is running Snow Leopard - 10.6, have you checked this link?
http://support.apple.com/kb/TS3540
Similar Messages
-
My iPad does not appear as a device in iTunes
I have sinced my iPad but it does not appear in iTunes as a device whatever I try. Are there any tricks?
I had this a while ago and it may work for you. Hook up the iPad with the cable and in the Summary page under options see what is checked
For wiFi to work you need the sync with this iPad over WiFi selected.
I am assuming you have already done this. I deselected the Wifi, Sync'd and the reapplied it and syn'd. The disconnected the USB cable and the iPad remained connected -
IPad does not appear as a device in iTines, nor on My Computer
My iPad previously linked ok to iTunes and listed as a device on My Computer. Now suddenly it does not, and in iTunes when I select Apple store I get an error message "unknown error" or "cannot connect to Apple server". Yet I am connected to internet and my iPad connects to internet, too. Help.
I would start here:
http://support.apple.com/kb/TS1495
(iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows) -
My ipod nano 3rd generation is not recognized by my Windows 7 laptop when I plug it in under itunes latest version
Hi Matt00,
thank you for your response. I followed the steps you suggested, but still no luck. Is a the fact that I am using a notebook a problem? I have been doing more searching and it seems my HP Pavilion Notebook does not have a firewire port?
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Hewlett-Packard HP Pavilion 17 Notebook PC
iTunes 11.3.1.2
QuickTime 7.7.5
FairPlay 2.6.15
Apple Application Support 3.0.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number xxxxxx
Current user is not an administrator.
The current local date and time is 2014-08-23 22:37:26.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper 11.3.1.2 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
No Universal Serial Bus Controller found.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
IPOD (G:\), iPod nano (3rd Generation) running firmware version 1.0.3
Serial Number: xxxxxx
Bus Speed: 61440
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 7.1.1
Serial Number: xxxxx
**** Device Sync Tests ****
No iPod, iPhone, or iPad found. -
My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?
DId it successfully connect to this computer before?
Try:
iOS: Device not recognized in iTunes for Windows
or
V
Also try placing the iPod in DFU mode and then try restoring
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
TS1538 My the new ipad does not appear in itunes, Pls help
My ipad does not appear in Itunes to restore or back up data. Thestatus of my device are:
- updated the latest Itunes version 10.6 .
- tried to restart Apple Mobile Device in Window but it still doesn't work.
- Could not restore in DFU becasue the window doesn't recognize ipad. It appeared cable & itunes disk images but it itunes does not recognize.
- When i pluged the ipad in my laptop, window could not reconize ipad neither.
Please help to solve it!Let me summary what i have done in the last few days to try to fix the issue taht the new ipad does not appear on itunes 10.6 so that you guys can have an overview to help me :
- removed previous itunes together with Apple Mobile Device and Bonjours
- Reinstall latest version Itunes
- restart computer (for sure the problem not from laptop becasue my other new ipad and iphone4 stil work well with itunes)
- tried using recovery mode when the iPad is connected with computer and iTunes open; Keep the Powerbutton and the Homebutton pressed at the same time until see the Apple logo on iPad screen.Then wait for about 10 minutes (i repeat this step many times). Ipad is turned on but still not connect to itunes or no notice board appeared on itunes to start restore
- I changed the usb cable/port...nothing change
status of device is:
- battery is fully charged
- My laptop (window 7)
- All what i can get is the ipad is charged when i plug in laptop.
- no apple device is recognized on "my computer" window
- no images tab is pop up as usual to copy photo
Apple experts ...help me...pls... -
My ipad does not appear in itunes
my ipad does not appear in itunes but the computer recognises it
I had the same problem. found a dozen different solutions in various forums. None worked.
One of the official responses TS1538 came very close and sounded promising. I found that the usb device did not appear in device manager. The ipad appeared only in the imaging devices.
The instructions were to right click on the entry in images and update the driver, pointing at
program files\common files\apple\drivers\usbaapl.inf.
This told me that my device was not found in the driver. date on the files was 2009. date on the files in another pc which worked was 2011.
I had already re-installed itunes, which I thought should install the necessary driver.
Decided to fool it. copied the files in the above folder and then deleted them. Then re-installed itunes again.
Fixed.
So why doesnt itunes installation over-ride the old files?
Why doesnt apple tell us about this fix.
Why did I buy and apple? -
HT1535 The option for "On this IPad" does not appear?
Despite having a manual set up of content checked, the option for "On this IPad" does not appear? Why is this?
Hi pmbrady,
The "On this [device]" tab will only show up if you are in the non-sidebar view of iTunes. In short, if you have the sidebar on the left hand side, you will want to use the disclosure triangle (left of your device name) to view what is on the device.
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Thanks,
Matt M. -
my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.
You've connected the iPad via cable to your computer, and your computer's iTunes is up-to-date ? If it's icon isn't showing then try one of these troubleshooting pages :
PC : iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Mac : If you don't see your connected device in iTunes for Mac - Apple Support
If the iPad is disabled then you'll need to reset the iPad back to factory defaults, after which you can restore to your backup -
I downloaded AirPlayIt yesterday from the app store. It was on my iPad yesterday. Today, however, the app icon does not appear on my home screen. When I go into apps it is there but it doesn't have an "Open" choice. There is only a cloud with an arrow pointing down. When I click on the app it pops up but there is no open button. How can I remove it? Tapping it won't work as it isn't on my home screen.
You'll have to contact the developer about this. Apple doesn't make this app;
-
[solved] SD card in my card reader does not appear as a device
Greetings.
I have an Asus EEE 1015PEM netbook, which has a built-in card reader.
I found some old SD cards that I am trying to get files from. When I insert them into the SD card reader in my netbook, the SD card does not appear as a device, and thus, I cannot mount it.
sh-4.3$ ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sda3
sh-4.3$ lsusb
Bus 001 Device 002: ID 13d3:5702 IMC Networks UVC VGA Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 13d3:3315 IMC Networks Bluetooth module
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
sh-4.3$ # insert card
sh-4.3$ sleep 10
sh-4.3$ ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sda3
sh-4.3$ lsusb
Bus 001 Device 002: ID 13d3:5702 IMC Networks UVC VGA Webcam
Bus 001 Device 010: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 13d3:3315 IMC Networks Bluetooth module
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Come to think of it, I am not sure I ever tried my SD card reader since I installed Arch on the machine (the machine was running Ubuntu before that, and there, inserting an SD card would trigger some automount magic).
You guys know what I can do to access the files on my SD cards?
Cheers,
Willard.
Last edited by willardthor (2014-06-08 17:13:35)Trilby wrote:
And
uname -a
pacman -Qs linux
sh-4.3$ uname -a
Linux fenrir 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64 GNU/Linux
sh-4.3$ pacman -Qs linux
local/alsa-lib 1.0.27.2-1
An alternative implementation of Linux sound support
local/alsa-utils 1.0.27.2-1
An alternative implementation of Linux sound support
local/archlinux-keyring 20140220-1
Arch Linux PGP keyring
local/aura-bin 1.2.3.4-1
A secure package manager for Arch Linux and the AUR written in Haskell - Prebuilt binary
local/iptables 1.4.21-1
Linux kernel packet control tool
local/keyutils 1.5.9-1
Linux Key Management Utilities
local/kmod 17-1
Linux kernel module handling
local/lib32-alsa-lib 1.0.27.2-1
An alternative implementation of Linux sound support (32 bit)
local/lib32-libxshmfence 1.1-1
a library that exposes a event API on top of Linux futexes (32-bit)
local/lib32-util-linux 2.24.1-1
Miscellaneous system utilities for Linux (32-bit)
local/lib32-v4l-utils 1.0.1-1
Userspace tools and conversion library for Video 4 Linux (32-bit)
local/libimobiledevice 1.1.6-1
Is a software library that talks the protocols to support iPhone and iPod Touch devices on Linux
local/libiodbc 3.52.9-1
Independent Open DataBase Connectivity for Linux
local/libutil-linux 2.24.2-1 (base base-devel)
util-linux runtime libraries
local/libva 1.3.1-1
Video Acceleration (VA) API for Linux
local/libxshmfence 1.1-1
a library that exposes a event API on top of Linux futexes
local/linux 3.14.5-1 (base)
The Linux kernel and modules
local/linux-api-headers 3.14.1-1
Kernel headers sanitized for use in userspace
local/linux-firmware 20140316.dec41bc-1
Firmware files for Linux
local/lirc-utils 1:0.9.0-71
Linux Infrared Remote Control utils
local/man-pages 3.68-1 (base)
Linux man pages
local/mdadm 3.3-2 (base)
A tool for managing/monitoring Linux md device arrays, also known as Software RAID
local/mplayer 37051-2
Media player for Linux
local/pacman-mirrorlist 20140531-1
Arch Linux mirror list for use by pacman
local/pipelight 1:0.2.7-1
A browser plugin which allows one to use Windows only plugins inside Linux browser
local/syslinux 6.03pre12-3
Collection of boot loaders that boot from FAT, ext2/3/4 and btrfs filesystems, from CDs and via PXE
local/util-linux 2.24.2-1 (base base-devel)
Miscellaneous system utilities for Linux
local/v4l-utils 1.0.1-1
Userspace tools and conversion library for Video 4 Linux -
After choosing my device the "add music" button does not appear. I just downloaded ITunes 11. Any suggestions?
Read the User's Guide and learn how to add content to the device.
-
when I sync my ipod touch (4gen), my music does not appear on my device. What went wrong?
Hello,
The problem is that you just don't selected the music that you want to import.
You can do this by opening iTunes, search your ipod in the superior bar, select it, then will appear a screen showing the information of your ipod, you can check how many songs are in your ipod, if there says nothing so theres the problem. In the superior bar, select Music, then click on the box "Sync Music", now select the songs you want right down. And press "Sync" That should solve the problem.
Cheers -
Ipod touch does not appear in my computer or itunes
my ipod touch does not appear in "my computer" or"itunes"
i have reset the ipod
switched it on and off and also the PCwhen you connect the ipod what does it do? does it charge? does the cable have connectivity?
try a different USB port first. also, how did you reset the ipod? can you describe? -
Everytime I open iTunes lately...I get all my music thrown out of the library and this annoying message come up...The file “iTunes Library.itl” does not appear to be a valid iTunes library file. iTunes has created a new iTunes library and renamed this file to “iTunes Library (Damaged) 4”. Is this how an apple works? It doesn't? Why all of a sudden is it doing this? Please help. Thank you.
DavidDid you happen to bring this iTunes library over from a windows machine? You might read this kb article to see if it helps http://support.apple.com/kb/HT1451
Maybe you are looking for
-
ADF Faces - Table update not completely rendered
Hi, [ myfaces 1.1.3 + ADF version 10.1.3.0.4 ] I have a problem with Table component, changing a value of the inputText components will not update the output component also inside the table. At least not rendered to HTML, the view-tree contains the u
-
Enter verification code from iPhone
When renting a movie on AppleTV, it's asks for a verification code. I'm using my iphone as a remote. My code is 3 digits but there are 4 boxes. There is no way to navigate to "submit" from my iPhone (using as remote). I tried entering 0 and then my
-
How to display folder description?
Hello, I have a Portal 3.0.6.6.5 instance (Oracle 8.1.7 RDBMS). When I create a folder inside my content area, it seems there is no way to display the folder description. Anyone of you can help me? Thanks in advance, Marco
-
Problem in posting the downpayment using the idoc ACC_document03
hi all, I am assigned with an object where a flat file comes frm a third party tool that need to be posted in to sap system. there is a standard Idoc ACC_document03 to do the job, but here in this std Idoc some of the fields are missing, using the BT
-
Complex section of smart forms
before ecc 6.0 there was a option to create the complex section but in ecc 6.0 there is no such option. how to deal with it?