My iPad has been stolen, I need some help with the Find my iPhone app and iCloud please

Hello people. I have (had) an iPad 1 (wifi only) - which was stolen two days ago. It's locked with a passcode but I am worried that someone will be able to get into it. I've got the Find app installed on my iPhone 4S and it shows that both my iPad and stolen iPod are offline.
Q - if either the iPad or the iPod goes into an unlocked wifi area, will I be notified on my phone?
Q - can anyone actually break into my iPad as it is locked?
Q - how does iCloud work in terms of the info that's on my iPad - photos etc that I don't want to lose?
Q - I've reported this to the police - does Apple need to know?
I'd be very grateful for any advice, many thanks in advance

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

Similar Messages

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

I had the "find my iphone" app and deleted it and then my ipod was stolen. can my ipod still be located ?

i had the "find my iphone" app and deleted it and then my ipod was stolen. can my ipod still be located ?

Apple will not track it for you unless with Find my iPod. Again, whether you have the app or not doesn't matter, I believe you still had the service enabled. It doesn't hurt to try. http://icloud.com, click Find my iPhone after you sign in.

HT5622 I never set up icloud and my ipad has been stolen is there any way i can find it still?

I never set up icloud on my ipad and it has been stolen is there any way i can still track it without it being turned on the device?

Nope.
What To Do If Your iDevice or Computer Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Mac Computer
       Find My Mac can be used from Find My Phone at iCloud.com and via Find
       My Phone on your iDevice.
      The following is third-party anti-theft software:
           1. STEM 2.1
           2. MacPhoneHome 3.5
           3. MacTrack 7.5.0
           4. VUWER 1.7
           5. Sneaky Bastar* 0.2.0
           6. Undercover 5.1.1
           7. LoJack for Laptops
           8. Hidden 2.0
           9. Prey 0.6.2

It's been 1 month, my MacBook Pro has been stolen. I keep on checking the "find iPhone" but no luck, I also have used "prey" app, I haven't given up is there anything I can do.

It's been 1 month, my MacBook Pro was stolen. I keep on checking the "find iPhone" app but no luck, I also have used "prey" app same thing. I haven't given up, is there anything I can do.
i Read some of the peoples stories and saw that it takes like years to get your mac back.

Hey Angel88.la,
Thanks for using Apple Support Communities.
Having a product stolen can be a very frustrating situation for sure.
Reporting a lost or stolen Apple product
http://support.apple.com/kb/HT2526
iCloud: Use Lost Mode
http://support.apple.com/kb/PH2700
Important: If you lock a Mac, you may not be able to locate it, and you won’t be able to erase it remotely
Have a nice day,
Mario

Need some help with the colour profile please. Urgent! Thanks

Dear all, I need help with the colour profile of my photoshop CS6.
I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
And the colour started to get messed up.
And the output is a total diasater
Put the above photo side by side with the raw, the red has became crimson!!
So I tried the other option, Use the embedded profile
The whole picture turns yellowish in Photoshop's interface
And the output is just the same as the third option.
Could someone please guide me how to fix this? Thank you.

I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
windows calibrate link:
http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
you may want to download the PDI reference image to check your monitor and print workflows
and complete five easy steps to profile enlightenment in Photoshop
with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem...

Need some help with Calendar on my iPhone.

Ok folks. Need some help and it may be basic, but I'm struggling with it.
My wife and I both have iphone 5's. Both phones share one iCloud Id and one Apple ID.
So, how do we share information across the apple calendar app?
If I add something to my cal. It does not go to her. How can we get them to sync?
Please help!!!
Thank You!!

Two things to check by putting the two iOS devices side-by-side. First, check in Settings > iCloud to assure that you are indeed both using the same iCloud login. Also, check that calendar is toggled on.
Then, check Settings > "Mail, Contacts, and Calendars". Scroll down to the calendars section and assure that your iCloud calendar is set as the "Default Calendar".
Then, check that Settings > "Mail, Contacts, and Calendars" > "Fetch new data" is set to something suitable. Note that "Push" will be best for iCloud.
Lastly, open Calendars app, touch "Calendars" at the bottom, and assure that iCloud calendar is checked so it is visible.
Then give you calendars a try again making sure that you are posting calendar events in the iCloud calendar.
Hope this helps.

I think my iPhone has been stolen. How do I know if Find My iPhone has been turned on?

I'm not sure if I set up Find My iPhone. It is showing up in Find my iPhone, but as offline. Would it show up if I never set it up? Or does this mean its probably been turned off. I last had it within wifi and data should be turned on as well.

If offline, that means Find My Phone was setup/activated. One of the first things a thief will do is turn an iPhone off, thus defeating Find My Phone.
Report the loss to the Police, your carrier & Insurance company. Change all of your passwords, especially Apple ID & Mail.

Need some help with the Table Function Operator

I'm on OWB 10gR2 for Sun/Solaris 10 going against some 10gR2 DB's...
I've been searching up and down trying to figure out how to make OWB use a Table Function (TF) which will JOIN with another table; allowing a column of the joined table to be a parameter in to the TF. I can't seem to get it to work. I'm able to get this to work in regular SQL, though. Here's the setup:
-- Source Table:
DROP TABLE "ZZZ_ROOM_MASTER_EX";
CREATE TABLE "ZZZ_ROOM_MASTER_EX"
( "ID" NUMBER(8,0),
"ROOM_NUMBER" VARCHAR2(200),
"FEATURES" VARCHAR2(4000)
-- Example Data:
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (1,'Room 1',null);
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (2,'Room 2',null);
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (3,'Room 3','1,1;2,3;');
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (4,'Room 4','5,2;5,4;');
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (5,'Room 5',' ');
-- Destination Table:
DROP TABLE "ZZZ_ROOM_FEATURES_EX";
CREATE TABLE "ZZZ_ROOM_FEATURES_EX"
( "ROOM_NUMBER" VARCHAR2(200),
"FEATUREID" NUMBER(8,0),
"QUANTITY" NUMBER(8,0)
-- Types for output table:
CREATE OR REPLACE TYPE FK_Row_EX AS OBJECT
ID NUMBER(8,0),
QUANTITY NUMBER(8,0)
CREATE OR REPLACE TYPE FK_Table_EX AS TABLE OF FK_Row_EX;
-- Package Dec:
CREATE OR REPLACE
PACKAGE ZZZ_SANDBOX_EX IS
FUNCTION UNFK(inputString VARCHAR2) RETURN FK_Table_EX;
END ZZZ_SANDBOX_EX;
-- Package Body:
CREATE OR REPLACE
PACKAGE BODY ZZZ_SANDBOX_EX IS
FUNCTION UNFK(inputString VARCHAR2) RETURN FK_Table_EX
AS
RETURN_VALUE FK_Table_EX := FK_Table_EX();
i NUMBER(8,0) := 0;
BEGIN
-- TODO: Put some real code in here that will actually read the
-- input string, parse it out, and put data in to RETURN_VALUE
WHILE(i < 3) LOOP
RETURN_VALUE.EXTEND;
RETURN_VALUE(RETURN_VALUE.LAST) := FK_Row_EX(4, 5);
i := i + 1;
END LOOP;
RETURN RETURN_VALUE;
END UNFK;
END ZZZ_SANDBOX_EX;
I've got a source system built by lazy DBA's and app developers who decided to store foreign keys for many-to-many relationships as delimited structures in driving tables. I need to build a generic table function to parse this data and return it as an actual table. In my example code, I don't actually have the parsing part written yet (I need to see how many different formats the source system uses first) so I just threw in some stub code to generate a few rows of 4's and 5's to return.
I can get the data from my source table to my destination table using the following SQL statement:
-- from source table joined with table function
INSERT INTO ZZZ_ROOM_FEATURES_EX(
ROOM_NUMBER,
FEATUREID,
QUANTITY)
SELECT
ZZZ_ROOM_MASTER_EX.ROOM_NUMBER,
UNFK.ID,
UNFK.QUANTITY
FROM
ZZZ_ROOM_MASTER_EX,
TABLE(ZZZ_SANDBOX_EX.UNFK(ZZZ_ROOM_MASTER_EX.FEATURES)) UNFK
Now, the big question is--how do I do this from OWB? I've tried several different variations of my function and settings in OWB to see if I can build a single SELECT statement which joins a regular table with a table function--but none of them seem to work, I end up getting SQL generated that won't compile because it doesn't see the source table right:
INSERT
/*+ APPEND PARALLEL("ZZZ_ROOM_FEATURES_EX") */
INTO
"ZZZ_ROOM_FEATURES_EX"
("ROOM_NUMBER",
"FEATUREID",
"QUANTITY")
(SELECT
"ZZZ_ROOM_MASTER_EX"."ROOM_NUMBER" "ROOM_NUMBER",
"INGRP2"."ID" "ID_1",
"INGRP2"."QUANTITY" "QUANTITY"
FROM
(SELECT
"UNFK"."ID" "ID",
"UNFK"."QUANTITY" "QUANTITY"
FROM
TABLE ( "ZZZ_SANDBOX_EX"."UNFK2" ("ZZZ_ROOM_MASTER_EX"."FEATURES")) "UNFK") "INGRP2",
"ZZZ_ROOM_MASTER_EX" "ZZZ_ROOM_MASTER_EX"
As you can see, it's trying to create a sub-query in the FROM clause--causing it to just ask for "ZZZ_ROOM_MASTER_EX"."FEATURES" as an input--which isn't available because it's outside of the sub-query!
Is this some kind of bug with the code generator or am I doing something seriously wrong here? Any help will be greatly appreciated!

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Need some Help with the new Genius Mixes on iTunes 9

I would like to know how to use the New Genius Mixes on iTunes 9. I don't quit know how to use it yet and like all of us we're all just learning how to use the Genius Mixes. I did watch the KeyNote but they didn't go into great detail on how to use it. Does Apple have a web site that has more detail instruction on how to use the genius Mixes? I did find some info. on how to use the Genius mixes but it didn't go into great detail on how or what to do with the genius Mixex and thats what I need.
when I click on the genius Mixes icon under the "Genius", what shows up is a Big square with four album images of my music that I have in my music collection, I go and roll my mouse over the Big square with my four music albums and click on it to play the music and it'll play what ever I have in the Genius Mix list plus as I roll my mouse over the Big Square, under it it says "Jazz Mix" with some text writings under the Jazz mix.
I want to change the Jazz mix Title and I want to know how to add more music square boxes to my Genius Mixes just like they show in the Keynote and I would like to edit and create my own four square music boxes in my Genius Mixes.
I never used my music genius list, I always created just a play List, now I am just learning how to use this music Genius lists and I don't know how to use it at all and I need someone that knows how to use thr Genius Mixes list to help me how to use it since there isn't a how to book yet for the new iTunes 9.
Can someone Please help me with the new genius Mixes on iTunes.
Thank you,
Mrs Trisha Foster

Today, I was getting an array out of bounds exception on a split
I don't see how that could happen with the 'split' method since it creates its own array.
For this particular string, ordSplit.length = 24 and commas = 26.
PERFECT! That is exactly what it should be!
Look closely at the end of the sample string you posted and you will see that it has trailing empty strings at the end: '1096200000000242505,,,'
Then if you read the Javadocs for the 'split' method you will find that those will NOT be included in the resulting array:
http://docs.oracle.com/javase/6/docs/api/java/lang/String.html#split(java.lang.String)
split
public String[] split(String regex)
Splits this string around matches of the given regular expression. This method works as if by invoking the two-argument split method with the given expression and a limit argument of zero. Trailing empty strings are therefore not included in the resulting array.
Just a hunch but your 'out of bounds exception' is likely due to your code assuming that there will be 26 entries in the array and there are really only 24.

Holla, I need some help with the mess I have created on my Mac.I deleted Mackeeper...now I have problems everywhere :/

So the story goes, I for some reason thought it'd be smart to delete mackeeper, I guess not. Since I have done this, I now get survey pop ups, slow slow navigation of my mac and some of my itunes files have entirely vanished.... I put Mackeeper in the trash and deleted it along with the few things in there... before this started happening... I now apparently have to pay to have Mackeeper again? I thought Mac was great in the no virus department or am I an undercover genius and figured out how to properly mess up my Mac to the point that virus's have taken over? I also noticed I had a file convertor where I was able to watch my avi files through has disappeare, entirely no trace of the program.. Is this something I may be able to do or is the shop best off having it?

Maybe the uninstalling wasn't done correctly. Did you follow these instructions?
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
If you didn't, you may need to re-install the dreaded MacKeeper and then uninstall it again following the above.

Need some help with the DOF Min Max Planning Logic

Hello All,
Morning...could someone please help us with this issue which we are facing in our production system.
We are running the Dof Min Max Planning Report at the Subinventory level and for a given item.
This item setup in this sub inventory has the Min qty : 2 , Max qty :2.
--We don't see any open orders/ requisitions in the system for this item.
--We also don't see any expected receipts for this item coming to this org/subinventory.. All the shipment lines are in Fully Received status.
--We dont see any stuck supply records in mtl_supply table as well..and also checked for the Inv Transactions interface tables as well ( MTI , mtl_material_transactions_temp)..we dont find any stuck transactions for this item, subinventory & org.
Now when we are running the Dof Min Max report is is showing the Supply Quantity as 2 and Available Quantity as 2.
Hence the Reorder quantity is coming as Zero..basically it is not re stocking the item again for this subinventory level.
Could someone please assist as to what could be reason why this Supply Quantity is showing some value when we dont see any stuck supply / expected open receipts..
What else we need to check here to get this issue resolved and to know the source of the Supply Quantity.
thanks

In the report run, what parameters are considered as Supply?, Also did you check the supply data considering your cutoff dates offset?, the item what you are talking about is a buy item? check if there were requisitions already created.

I need some help with my java game using applets, CAN SOMEBODY PLEASE HELP

Hi,
I am in the process of creating a RPG program using Java. I am not very experienced with java, however the problem i am currently facing is something i can't seem to figure out. I would like to draw a simple grid where a character (indicated by a filled circle) moves around this grid collecting items (indicated by a red rectangle). When the character moves on top of the grid with the item, i would like it to disappear. Right now i am not worrying about the fact that the item will reappear after the character moves away again, because sometimes, when the character moves over the item, nothing happens/another item disappears. i have been at this for 4 days and still cannot figure out what is goign on. can somebody please help me? it would be most appreciated.
Thanks
PS if i needed to send you my code, how do i do it?

Thank you for replying.
The thing is, I am taking java as a course, and it is necessary for me to start off this way (this is for my summative evaluation). i agree with you on the fact, however, that i should go in small steps. i have been doing that until this point, and my frustration caused me to jump around randomly for an answer. I also think that it may just be a bug, but i have no clue as to how to fix it, as i need to show my teacher at least a part of what i was doing by sometime next week. Here is my code for anybody willing to go through it:
// The "Keys3" class.
import java.applet.*;
import java.awt.*;
import java.awt.Event;
import java.awt.Font;
import java.awt.Color;
import java.applet.AudioClip;
public class Keys3 extends java.applet.Applet
    char currkey;
    int currx, curry, yint, xint;
    int itmval [] = new int [5],
        locval [] = new int [5],
        tempx [] = new int [5], tempy [] = new int [5],
        tot = 0, score = 0;
    boolean check = true;
    AudioClip bgSound, bgSound2;
    AudioClip hit;
    private Image offscreenImage;
    private Graphics offscreen;     //initializing variables for double buffering
    public void init () //DONE
        bgSound = getAudioClip (getCodeBase (), "sound2_works.au");
        hit = getAudioClip (getCodeBase (), "ah_works.au");
        if (bgSound != null)
            bgSound.loop ();
        currx = 162;
        curry = 68;
        setBackground (Color.white);
        for (int count = 0 ; count < 5 ; count++)
            itmval [count] = (int) (Math.random () * 5) + 1;
            locval [count] = (int) (Math.random () * 25) + 1;
        requestFocus ();
    public void paint (Graphics g) //DONE
        resize (350, 270);
        drawgrid (g);
        if (check = true)
            pickitems (g);
            drawitems (g);
        g.setColor (Color.darkGray);
        g.fillOval (currx, curry, 25, 25);
        if (currkey != 0)
            g.setColor (Color.darkGray);
            g.fillOval (currx, curry, 25, 25);
        if (collcheck () != true)
            collision (g);
        else
            drawitems (g);
    } // paint method
    public void update (Graphics g) //uses the double buffering method to overwrite the original
                                     //screen with another copy to reduce flickering
        if (offscreenImage == null)
            offscreenImage = createImage (this.getSize ().width, this.getSize ().height);
            offscreen = offscreenImage.getGraphics ();
        } //what to do if there is no offscreenImage copy of the original screen
        //draws the backgroudn colour of the offscreen
        offscreen.setColor (getBackground ());
        offscreen.fillRect (0, 0, this.getSize ().width, this.getSize ().height);
        //draws the foreground colour of the offscreen
        offscreen.setColor (getForeground ());
        paint (offscreen);
        //draws the offscreen image onto the main screen
        g.drawImage (offscreenImage, 0, 0, this);
    public boolean keyDown (Event evt, int key) //DONE
        switch (key)
            case Event.DOWN:
                curry += 46;
                if (curry >= 252)
                    curry -= 46;
                    if (hit != null)
                        hit.play ();
                break;
            case Event.UP:
                curry -= 46;
                if (curry <= 0)
                    curry += 46;
                    if (hit != null)
                        hit.play ();
                break;
            case Event.LEFT:
                currx -= 66;
                if (currx <= 0)
                    currx += 66;
                    if (hit != null)
                        hit.play ();
                break;
            case Event.RIGHT:
                currx += 66;
                if (currx >= 360)
                    currx -= 66;
                    if (hit != null)
                        hit.play ();
                break;
            default:
                currkey = (char) key;
        repaint ();
        return true;
    public boolean collcheck () //DONE
        if (((currx == tempx [0]) && (curry == tempy [0])) || ((currx == tempx [1]) && (curry == tempy [1])) || ((currx == tempx [2]) && (curry == tempy [2])) || ((currx == tempx [3]) && (curry == tempy [3])) || ((currx == tempx [4]) && (curry == tempy [4])))
            return false;
        else
            return true;
    public void collision (Graphics g)
        drawgrid (g);
        for (int count = 0 ; count < 5 ; count++)
            if ((currx == tempx [count]) && (curry == tempy [count]))
                g.setColor (Color.darkGray);
                g.fillOval (currx, curry, 25, 25);
            else if ((currx != tempx [count]) && (curry != tempy [count]))
                g.setColor (Color.red);
                g.fillRect (tempx [count], tempy [count], 25, 25);
    public void drawitems (Graphics g)
        for (int count = 0 ; count < 5 ; count++)
            g.setColor (Color.red);
            g.fillRect (tempx [count], tempy [count], 25, 25);
    public void pickitems (Graphics g)
        check = false;
        for (int count = 0 ; count < 5 ; count++)
            if (locval [count] <= 5)
                tempy [count] = 22;
            else if (locval [count] <= 10)
                tempy [count] = 68;
            else if (locval [count] <= 15)
                tempy [count] = 114;
            else if (locval [count] <= 20)
                tempy [count] = 160;
            else if (locval [count] <= 25)
                tempy [count] = 206; //this determines the y-position of the item to be placed
            if (locval [count] % 5 == 0)
                tempx [count] = 294;
            else if ((locval [count] == 1) || (locval [count] == 6) || (locval [count] == 11) || (locval [count] == 16) || (locval [count] == 21))
                tempx [count] = 30;
            else if ((locval [count] == 2) || (locval [count] == 7) || (locval [count] == 12) || (locval [count] == 17) || (locval [count] == 22))
                tempx [count] = 96;
            else if ((locval [count] == 3) || (locval [count] == 8) || (locval [count] == 13) || (locval [count] == 18) || (locval [count] == 23))
                tempx [count] = 162;
            else if ((locval [count] == 4) || (locval [count] == 9) || (locval [count] == 14) || (locval [count] == 19) || (locval [count] == 24))
                tempx [count] = 228;
    public void drawgrid (Graphics g) //DONE
        g.drawRect (10, 10, 330, 230); //draws the outer rectangular border
        int wi = 10; //width of one square on the board
        int hi = 10; //height of one square on the board
        for (int height = 1 ; height <= 5 ; height++)
            for (int row = 1 ; row <= 5 ; row++)
                if (((height % 2 == 1) && (row % 2 == 1)) || ((height % 2 == 0) && (row % 2 == 0)))
                    g.setColor (Color.gray);
                    g.fillRect (wi, hi, 66, 46);
                else /*if (((height % 2 == 0) && (row % 2 == 1)) || ((height % 2 == 0) && (row % 2 == 0)))*/
                    g.setColor (Color.lightGray);
                    g.drawRect (wi, hi, 66, 46);
                    g.setColor (Color.lightGray);
                    g.drawRect (wi, hi, 66, 46); //drawn twice to make a shadow effect
                wi += 66;
            wi = 10;
            hi += 46;
        } //this draws the basic outline of the game screen
} // Keys3 class

Need some help with the samples

I am using CR for Visual Studio 2010. After installing CR and verifying the install per the developer guide, I down loaded the samples crsdk_net_samples_12.zip and loaded VB_Win_Data_DataSets.sln, electing to convert it from VS2008 to VS2010. After trying this several times, I could only get several error messages in the conversion log file.
I have read that it is easy to get these to work in VS 2010, but I can't find any instructions. The Crystal Reports for .NET SDK Samples download page has no readme file, or instructions or hints for conversion of these files into VS2010. I could not find samples created specifically for VS2010.
I must be missing something simple. Can you help me get some of these samples working in VS2010? I am interested in connecting to Collections in my program and to strongly types xml datasets. I plan to use filters and parameters and to use the ReportDocument Object Model. I could proceed without the samples -- but I am sure life would be a lot easier if I can get them to work and benefit from the good work that is there.
I could provide the log file. In part, it says:
Project: VB_Win_Data_DataSets Warning: this project requires Crystal Reports, which is no longer included with Visual Studio.
The converter (VS 2008 to VS2010) showed one error, converted 1 file, and did not convert 19 files.
Thanks

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Need some help with the best coding approach

Here is my scenario. I need to pull data from AFRU within a certain date range. Once I have this data i need to look at the confirmation number and counter. If the confirmation has more than one entry in the table i need to take the value of field ISOM1 associated with counter 2 and move it into the previous record's ISOM1 field. the reason is the value calculates the set up time form counter 1 to 2 but it is placed in counter 2.
I was thinking of a select from AFRU into an internal table for the date range. Then I would sort descending and keep looping until my confirmation changes. Not sure how to accomplish this however in code.

Here is the code i put together. it doens't like my read or loop.
tables: afru.
     DATA: Ty_afru TYPE standard TABLE OF afru with header line,
          WA_AFRU TYPE TABLE OF afru with header line.
     data: wa_diff_time like afru-ISM01,
           wa_conf like afru-RUECK,
           wa_counter like afru-rmzhl.
     Select * from afru into table ty_afru
     where ERSDA > '01/01/2005'.
     sort ty_afru descending.
    read table tY_afru
    index 1.
     move ty_afru-ISM02 TO WA_DIFF_TIME.
     move ty_afru-rueck to wa_conf.
     LOOP AT tY_afru.
          wa_counter = ty_afru-RMZHL.
         if rueck = ty_afru-rueck and
          RMZHL = yy_afru-RMZHl.
          ty_afru-ISM02 = 0.
          elseif.
          ty_afru-rueck = rueck and
              ty_afru-RMZHL = RMZHL - 1.
        ty_afru-ISM02 = WA_DIFF_TIME.
move ty_afru-rueck to wa_conf.
       endif.
      wa_counter = ty_afru-RMZHL - 1.
     ENDLOOP.
endcase.

My iPad has been stolen, I need some help with the Find my iPhone app and iCloud please

Similar Messages

Maybe you are looking for