My iPad is disabled and it says to connect to iTunes with my Mac. Its not working. How can I get my iPad to work?

My iPad is  disabled and it says to connect to ITunes with my Mac. It still is not working.

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Similar Messages

  • How can I restore my Sons Ipod it says is disabled and to connect to i-tunes, when i connect to itunes i can't either and it says i need a passcode which we don't have. How can i get it back to work? please help!!

    Hi, I'm trying to get my sons Apple Ipod back to work but im unable to because the I-pod says to connect to I-tunes and is dissabled. When I connect it to I-tunes it says to put a passcode which I don't have. Can someone help please??

    http://support.apple.com/kb/HT1808

  • My iPad is locked and it says to connect to iTunes, and iTunes will not let me connect.

    My iPad is locked and it says to connect to iTunes, and iTunes will not let ,me connect.

    Try this:
    1. Go to Settings>General>Date and Time>Set Automatically>Off
    2. Set the date ahead by a few months
    3. You should then be able to connect to the store

  • My ipod touch is disabled and it says to connect to itunes but itunes says it can't sync since it is locked.  How can I unlock it and get all my data back?  (apps, profiles, gaming levels.)

    My ipod touch is disabled and it says to connect to itunes but itunes says it can't sync because it is locked.  Any way to unlock and keep data?  (apps, gaming levels, music).

    Hi,
    Take it to you nearest Apple Store and see what they have to say. You should back up you data before you go in but in your case you can not.
    xxmitchxx90

  • My ipad is disabled and i have to connect to itunes what do i do

    my ipad is disabled and i have to connect to itunes what do i do

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • I get a no service msg and a USB connected to itunes icon on the home page. How can i get past this so i can access and unlock my phone?

    i get a no service msg and a USB connected to itunes icon on the home page. How can i get past this so i can access and unlock my phone?

    DFU Mode /  Recovery Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • My phone is disabled and it says to connect to itunes and i have no idea what to do

    my phone is disabled and it says to connet to itunes but i have no idea what to do

    Do as it says and connect to iTunes.
    If you can't, try this: http://support.apple.com/kb/HT1808

  • My ipad says ipad is disable and it needs to connect to iTune?

    I have this Ipad taht my cousin gave me to fix, when i turned it on is say ipad is disable and on the bottum says connect to iTune. How do I reset it with out logging in.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note: Data will be lost
    Message was edited by: Diavonex

  • My ipad is disable and wants me to connect to itunes after i plug it in it is connected to the camera instead what do i do

    my ipad was disable because i forgot the passcode. it wanted me to connect to itunes so i plug it into my computer when it pop out it said it is connected to the camera so what do i do

    Placing your device into recovery (DFU) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the screen pictured below,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • TS1369 my "home" computer for my ipad is no longer working, how can i get my ipad recognized on new comp to get it out of recovery mode?

    The original laptop i used to start my ipad broke so i have a new laptop. I cannot upgrade my ipad with the new laptop and i cannot get it out of recovery mode cuz my laptop is not recognizing the ipad. How can i get my laptop to recognize the ipad so i can get it out of recovery mode?

    Hey Dpcupcake,
    If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • My Ipad is disabled and is telling to connect to Itunes?

    I have forgotten my PassCode and my Ipad says 
    Ipad Is Disabled
    Connect To Itunes
    What do I do??
    Need Help Urgently pls Help!!!!!!!!!!

    http://support.apple.com/kb/HT1212
    You'll want to follow this article if you have a computer you sync constantly with iTunes with. If you don't then you can restore the device to factory default to reenable it.

  • My ipad is disabled and requesting me to connect to itunes but itunes is telling me to put in password to be able to access itune. What should i do?

    my ipad is disabled. What should i do?

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • My ipod is disable and it says to connect to itunes

    My ipod is disable and it has been saying to connenct to itunes so i connect AND IT'S NOT WORKING!!!

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My ipod is disabled and it says to connect to itunes and i dont know what to do

    my 4 gen. i pod touch say disabled to connect to itunes and i am on itunes and i have logged in and i dont know what to do next

    Connect the iPod to yur computer and restore via iTunes. For how to restore see:
    iTunes: Backing up, updating, and restoring iOS software
    Place the iPod in Recovery mode if necessary to allow the restore.
    For more info see:
    iOS: Wrong passcode results in red disabled screen

  • My ipod touch is disabled and it says to connect to itunes and when I go on to itunes I don't know what to do

    My ipod touch is disabled it says connect to itunes (because I got my password wrong loads of time) but when I go on itunes I don't know what to do!! Help please!!!

    This should help: http://support.apple.com/kb/HT1212

Maybe you are looking for

  • Extended notifications: SWN_SELSEN

    Hello SolMan experts, I configured the extended notifications for work items in solman using TA SWNCONFIG (as suggested under sap library and in this forum). I completed all steps successfully. However, when I run the program SWN_SELSEN, notification

  • Missing Font Helvetica Neue LT

    Hey. I've got a Problem with my Adobe InDesign CS6. When i want to open a file it says there are missing Fonts. The Fonts that are missing are: Helvetica Neue LT LT 55 Roman Helvetica Neue LT LT 75 Bold Helvetica Neue LT LT 45 Light So i looked them

  • Is this true about installation disks??

    Is it true that certian OS cd's can only be loaded onto certain Mac's? Ex. Like a installation disk from a emac wont work on a powermac? What do the codes on the disks mean when it says "disk 1" and "disk 2" etc? I aquired a 2002 powermac G4 quicksil

  • How to calculate elapsed time(including time and date)?

    Hi all, I want to realize a function that can calculate the elapsed time which include time and date.Below is my thought:get the current time and date and store it to a .txt file then using the latest time and date subtract the time and date stored i

  • SQL Upgrade on VMM server

    I am running VMM 2012 R2 UR5 (version 3.2.7895.0) and I want to upgrade SQL from 2012 RTM to 2012 SP2. I have been looking for some documentation to verify whether or not SQL 2012 SP2 is supported but I have not found any.  Can someone confirm this f