My iPad is not recognize in iTunes when connected with usb

I wonder if someone have a solution, I connected my ipad to a new macbookpro and it is not detected in iTunes. any idea why

http://support.apple.com/kb/TS1591

Similar Messages

  • IPad is not detected by iTunes when connected to desktop

    When I connect the iPad to the Windows desktop, the iTunes app usually opens up automatically.  It does however not connect with iTunes when connected any more.
    When I connect the iPad to the desktop, I am able to access the pictures though windows explorer but iTunes still does not detect the iPad?
    I have swithced the iPad off and on again.
    Any suggestions?

    Hello JJJJNNNNN,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Have a nice day,
    Mario

  • My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.

    My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB.  I have reinstalled iTunes to no avail.

    Hey, I may have to if I can't get this one to work!!
    I have tried a different USB to no avail.  Both cables work on my old Dell so I don't believe they are the issue. 
    I uninstalled iTunes as directed by Apple Support and reinstalled.  Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs. 

  • Macbook does not recognize iphone 5s when connected using usb cable that came with charger

    I have a mac book pro Retina, 15-inch, Late 2013 and iPhone 5s. When I connect iphone to the macbook using the usb cable that came with iphone charger, macbook pro is not recognizing the iphone 5s.
    Does any one have any solution for the problem

    iOS: Device not recognized in iTunes for Mac OS X
    BTW, this is the Mac Pro desktop forum

  • TS3716 My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music.  I didn't have problems loading music originally, but this is a new occurrence.  Could you help?

    My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music.  I didn't have problems loading music originally, but this is a new occurrence.  Could you help?

    Hey, Thanks a lot.  It took quite a bit of time to resurrect this ipod.  I tried the upgrade again, but still would not recognize my ipod. So I went to the next step and reset my ipod, wiping of all of the information like it was new.  This helped my laptop see the ipod on itunes, but did not sync. So, I deleted the itunes off my computer completely, restarted and then reinstalled the newest itunes, and then restarted.  Finally, it recognized my ipod and started to download each song.  It took awhile as there was 602 songs, but finally it works.  Yea!!!  I never had any problem with my old nano, but this touch has been another animal for sure. Thank you again and also the community for information.  This was a helpful forum and will recommend to others if they get stuck with their ipod or iphone.  Take care, Karen

  • Can't open app store in itunes when connected with ipad

    Hi. Could anybody tell me how I can use app store in itunes when connected with ipad 2? When I click app store, it just gives no response at all. Thanks a lot!

    Welcome to the Apple Community.
    Do you have the power cable in, it won't show up with the power cable in.
    Additionally, there have been some issues with the update servers, it's possible you won't be able to complete the update procedure anyway.

  • Will not recognize the Lucid LG when connected with USB

    My Dell  will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately.  After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?

        That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port.  Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5 
    Keep us posted on any additional information/details about your issue.
    Thanks,
    MikeS_VZW
    Follow us on Twitter @VZWSupport

  • Nano 3rd will not unlock and is not visible in iTunes when connected to computer.

    My 3rd Gen Nano is stuck in locked position with the screen lit.  Additionally it does not show up on the computer or in iTunes when connected.  I can't restart or repair myself.  I suspect the locked switch may be broken.  Any ideas?

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are.
    Still no joy? See these.
    iPod doesn't appear in iTunes or on the Mac desktop.
    iPod does not appear in iPod Updater or iTunes in Mac OS X.
    iPod appears on the Mac OS X desktop but not in iTunes.
    Try it in disk mode.
    Putting iPod into disk mode.

  • My 2nd generation ipod will not show on itunes when connected

    my 2 nd generation ipod does not show on itunes when connected

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • HT1386 new iPhone 5C not showing up in iTunes when connected by USB

    new iPhone 5C not showing up in iTunes when connected by USB

    Hey there krpeterson93,
    It sounds like your new phone is not appearing in iTunes on your computer. Depending on the version of your OS, the instructions are a different.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    or
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • My ipod touch 4g does not appear in itunes when connected

    My ipod touch 4g does not appear in itunes when connected

    See the suggestions in this article.
    http://support.apple.com/kb/TS1538
    B-rock

  • Device button no longer appears in iTunes after connecting with USB cable

    Since updating software to OUS 7.0.4 my device buttton no longer appears in the iTunes window after connecting with USB cable

    Problem solved. I needed to reinstall my Apple Mobile Driver.  I found the solution on this web site.
    iOS: Device not recognized in iTunes for Windows http://support.apple.com/kb/YS1538
    After I reinstalled the driver, my iPohne immediately synchronized with my computer. 

  • After a failed attempt to update ipad through itunes, ipad is frozen black, does not respond and does not show in itunes when connected

    I connected my Ipad to my computer and I started itunes. Ipad needed updating so I proceded. Then there was an error and now ipad is not working at all. I have updated itunes, and restarted the computer, but still, now, itunes does not recognize ipad when connected. What can I do?

    Was it EVER jailbroke?

  • ITunes on my computer does not recognize my IPod when connected to my computer

    When my Ipod is connected to the computer, it does not recognize there is a device. I have been able to sync my Ipod to my Itunes in almost 4 months. Songs transfer to Ipod but the playlists do not. I have tried to figure out the problem and nothing has worked so far to correct the problem. I hope someone is able to help me.

    Hello bre8613,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning recognition issues:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Your iPhone, iPad, or iPod touch may not appear under Devices in iTunes after you connect it to your Windows PC. Any of the following may also occur:
    The device cannot be restored in iTunes.
    An exclamation point, question mark, plug symbol, or "X" appears next to the device's entry in Device Manager.
    During an update or restore, the device may no longer be recognized by iTunes
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • ITunes will not recognize iPod touch when connected

    Everytime I connect my iPod it connects and disconects serveral times without stopping. It will not sync to iTunes because it cannot connect or stay connected anyone with help?

    See:
    iOS: Device not recognized in iTunes for Mac OS X
    Do not omit the Additional Information paragraph since that applies to Snow Leopard only.

Maybe you are looking for

  • Info about

    Hi, Presetnly I am working with FBL1N  Transaction. Vendor Line Item Display. I would like some one to elaborate on that the usage of this transaction  FBL1N. Actually when I am passing the Vendor A/c it should be posted to WBS element, but it is get

  • Can 8i be a Web Service Consumer?

    Is it possible to call a web service from a PL/SQL block in 8i (8.1.7) database? And do have any examples or guidelines? Thanks, Frederik

  • Finder window - tags - Want complete file colored

    Is there a way to color code the file instead of the colored dot beside the file?

  • Functional and ABAP specs

    Can someone please let me know the diffrence between functional and ABAP specifications and what exactly we doing while writing these kinds of specs. What are the kind of specifications does a functional person and what is that a ABAP person do? Can

  • User exit for change warning message to Error message in va01

    hi, I want to change  a warning message to as a Error Message in VA01 t-code, how can i proceed for this. where i need to change ( without changing standard code) thanks in advance.