My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?
My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?
OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013
Similar Messages
-
I have an Apple Ipad Air. I'm trying to use two bluetooth earphones at one time. Only one works at a time. Can two be used at the same time? If so how do I get them to work?
The likely reason no one can connect to the mini when it is connected to your work VPN has more to do with your work than your home set up. The administrator at work would have to decide to allow for "split-tunneling", thereby allowing your mac to be connected to work and the outside world simultaneously.
More here: http://en.wikipedia.org/wiki/Split_tunneling
Talk to the network admin at work. -
When I updated my iphone software, I lost my contact information. I see the backup on the devices menue in iTunes. However, it will only let me delete this backup and not restore it. How can I restore my old contacts to my iPhone? Thanks!
You will have to restore your iphone.
-
Using iMac and Macbook at the same time (not as 2nd monitor)
Hi all,
So I have an iMac (2013) and a Macbook Air (2012). I do NOT want to get a Macbook Pro and an external monitor. Here's what I'd love to do:
If I have both computers up and running on my work table, I'd love to be able to transition between them as seemlessly as if the Macbook was a secondary monitor. However, I want to access the Macbook Air's harddrive and contents while doing so. Example: I have Skype running on only the Macbook Air, a call comes in, I want to be able to mouse over from the iMac and take the call. I also want to be able to drag and drop content between the two computers (without using AirDrop).
Ambitious, I know, but is this possible? My understanding is that Target Mode means that I'm only using the screen, not the actual computer, so I wouldn't be able to run seperate software on the 2 computers. And I'm not sure an ethernet connection is possible because the Macbook Air doesn't have one. Any WiFi software solutions?
As always, thanks for any and all input!
Best,
RobYou can do this with the application Teleport
http://www.abyssoft.com/software/teleport/ -
Like if i get on facebook i can only see haft of the page. i can not see any thing to the left or right of the page
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages -
My computer does not see my printer
Hi: I am having a problem with my HP Photosmart 4500 printer. My computer does not see it. I have a USB connected to it, have uninstalled and installed the software two time, dowloaded the latest update and nothing. Add to that, I can not connect it by WIFI. WIFI on the printer is on but again, it's no where on any of the screens. The only variable I can think of that has changed has been the router I got recently from AT&T. Everything else works with the WIFI but no computer. I'm running 10.7.5. I have read the install instructions and nothing seems to be working. The one thing I do get from the HP install disc is a message reading the printer isn't recognized but there are no updates in support. OK, what am I missing here?
Try these steps to uninstall the current software using the HP scrubber and then reinstall using the current HP driver available through Apple.
To do so, perform the following steps:
1. Go to Applications/Hewlett Packard/ and then click on “HP Uninstaller”
2. Next click “Continue”
3. Highlight the device on the left pane.
4. Press and hold control+alt+command on the keyboard simultaneously while you click on “Uninstall”.
5. After you do this, you will see a pop up that asks you if you want to uninstall all HP software. Please note, that in doing this, it will remove any other HP printers that you also have installed.
6. Click “continue” and wait for the program to finish.
7. After it completes, reboot your computer.
Once the computer is back on, do the following steps:
WARNING: This is will delete all of your printers.
1. Go into “System Preferences” and then select either “Print & Scan” or "Print & Fax".
2. Right click (or control + click) on the rectangle listing your printers and then select “Reset Printing System”.
After you have reset the printing system, let's make sure you have the most recent HP driver package installed.
You can do this two ways. First, check for any available HP Update's by clicking the Apple icon and then Software Update. If there are any updates available, they should show up here. However, if the printer is connected by USB, it will not show any available updates. The other option is downloading the drivers from Apple's website.
You can download it here: http://support.apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg
Once you have downloaded the driver package and completed the installation, you will want to plug your printer back in (if you were using a USB connection). After the printer is plugged back in, go into your print settings under System Preferences > Print & Scan. To add the printer, click the plus sign. You should see your printer listed here. If not, click "Add Printer or Scanner." Click the name of your printer and then click "Use:” box. Make sure that says the name of your printer and not AirPrint. If you are using the printer wirelessly, make sure that the printer "Kind:" is set to Bonjour or Bonjour Multifunction. Click "Add" down in the bottom right hand corner.
This will add your printer back using the most recent HP print driver available through Apple. Let me know if this helps resolve your issue or not. If it doesn't, let me know I will see what else I can do.
Best of luck,
Kyle -
icloud suddenly stopped transferring files approximately 48 hours ago and that includes, contacts, Pages, etc to my iPad and Mac Computer from my iPhone How can I correct this problem? prior to that I had no problems with icloud transfers. what suggestions are there to remedy this problem?.
On your iPad and iPhone tap Settigs > iCloud
Switch Documents & Data off then back on. Do the same for Contacts.
On your Mac open System Preferences > iCloud
Deselect the box next to Documents & Data, same for Contacts then reselect both boxes then restart your Mac. -
the battery does not even show up. Have tried holding down both on/off and enter button at same time
Doesn't appear to have any life. Not that oldI have tried several plus into the computer itself
-
I want to set up appointment times for an overseas trip on my iPhone 4S before I go, and have them appear as I put them in (for the local time) when visiting other countries. I also want to be able to adjust times and set up new appointments when I am overseas for the local time. Can I do this using the Time Zone Support or any other way?
Basically I want to do what I can do with a piece of paper - write down the time for when I will be there, and have it viewable when I am there, but also be able to put down new times while there.Hi.
Regarding your question about reverting back- yes, I think you can. If you make a backup of your current configuration in Server Admin (by dragging the configuration file to your desktop- cool, no?) then you can load that one back in should your configuration not work. If you have the manual from Apple it should describe this process.
Network speed post-op? I don't think you will need to worry. Even using home directories stored on our OS X Server there is no network slowdown (that you can notice or that impacts the wider LAN in any case). It shouldn't slow down access to files, applications (which still come from the local drive anyway) or individual internet connections (even with filtering).
In our experience some of these things have actually got faster- but a lot of that is user perception. Same goes for people who will know you have configured the server and that they are now accessing files through your network from the server, and who really think it is slower. File coming from your local hard drive will always be quicker- but network access isn't that bad that it will make you barf and run in the opposite direction.
Something to look at: connection speed between clients and switching technology in your office. In other words, what kinds of switches are you using, what line speed have you got (100MB/s?) and is the connection from your server to the switch gigabit? Make sure it is.
Enjoy
Paul
MacBook Pro 2.16GHz Mac OS X (10.4.8) -
Someone else set up my apps on my iPad. Now when I load find friends it shows him instead of me. I rebooted and re installed the app. How can I remove him even though I'm signed in under my apple account tnx
deltajane wrote:
My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream. I did see everything there several weeks ago, so I know it worked. How do I access those from my computer. I can't find how to sign on.
This is the article that will assist with this part of your post:
http://support.apple.com/kb/ht4486
deltajane wrote:
I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
deltajane wrote:
I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone. -
When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
I have never previously had any problems with Home Sharing, I have always found it to be completely reliable as advertised. I have 2 computers in the house, (one MacBook and one Windows Desktop) connected to the same Home Sharing account, connected to the same BT Home Hub 4. My situation is that I have nearly 2TB of data of which I would like to share with the home wirelessly, in my mind the desktop is the logical place for this to be shared from.
When running, iTunes on this desktop broadcasts to other iTunes libraries, but no other iOS devices or Apple TV's connected to the same Home Sharing account cannot see it.
I have tried turning Home Sharing off, and then turning it back on, closing iTunes, restarting the computer, going to Network and Sharing Centre and unticking IPv6 in the network adapter properties, even completely wiping the computer and reinstalling Windows 7.
One of the Apple TV's in the house was recently purchased by my parents with the promise from me that everything would work seamlessly... so far it isn't and I am frustrated that the Apple technology that I have come to rely on isn't working as expected.
One thing that has occurred to me upon writing this is that it is a very large amount of data, and I have not attempted to share this with another computer that is currently working and broadcasting it's Home Share fine.
I am sorry if I have ommitted any important details, any further questions don't hesitate to ask. I would be so grateful of any suggestions, my parents are depending on me.I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time! -
Since upgrading to v 4.01 I am unable to print from a .pdf opened in the browser. How can I fix this?
I can save the page, open in Adobe Reader and print. When in the browser the File - Print command does nothing. Printer screen does not open.
Windows XP, all updates installed.Hi,
One thing to slow it down: low ink. Please check ink cartridges and replace if required.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I am trying to update my ipad 2 but it keeps telling me that it isn't eligible for the requested build how can i fix this problem
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Copied from this website.
http://support.apple.com/kb/TS3694#error3194 -
My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?
If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help. If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
The black dot problem may mean you need to reset your iPod. If that does not help, it may need service by an Apple Authorized Service Provider.
If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
http://www.apple.com/support/ipodtouch/
Message was edited by: EZ Jim
Mac OSX 10.7.3
Maybe you are looking for
-
How to get updated and recently created events from google calendar in pl/s
Hello I am able to get Google calendar events using pl/sql..I am receiving huge xml code(if there are more events),want only update and recently created events instead of getting repeated events.please help me in this regard. Thanks
-
Can't upgrade I tunes because of problems with Windows Service Pack 2
My daughter and I got shuffles for Christmas. I am unable to upgrade to the necessary version of I tunes because I do not have SP2. When I try to download the windows service pack 2 my computer crashes. Any suggestions? Are there any ways around this
-
FC publishes my 12th page as first, instead of showing the home page immediately. Page order?
I created a site in Flash Catalyst and when I published it everything was fine. Then I went back in and created a site map and suddenly, when I open the web page, the Site Map shows up first, instead of the home page. Is there a way to determine page
-
Scrubby Zoom in Illustrator CC
Windows 7 Adobe Illustrator Wacom Intuos Pen and Touch Small Tablet ... So I may be crazy... but I swear that until the last CC update that I installed last week, I was able to type Z or click the zoom icon on the left panel and swipe left or right w
-
How to Configuring Groups and Transport Targets ?
Hi Experts, In my scenario i am having two XI Servers XI1(DEV) and XI2(QUA) each system is connected to different r/3 system. If i transport object from XI1(DEV) to XI2(QUA) after defining Transport Target in XI1(DEV) as r/3 system conn