My ipad mini is stuck on the apple logo after it was trying to install iso 8, what do I do, its been hpurs and it still wont turn off or update.
I really need gelp, my ipad mini has never had problems till now. It won't turn off or reboot.
Hey there boogala1,
Try using the information in the following article to help you resolve this issue with your iPad mini:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Thanks for using the Apple Support Communities!
Cheers,
Braden
Similar Messages
-
I was updating my ipad 2 and then it said "restore in progress" than it shut down and attempted to start back up, but it got stuck at the apple logo! Sombody please help, I am very worried!
Try putting the iPad into recovery mode : http://support.apple.com/kb/ht4097
-
I have tried forcing a restart and the safe boot start up but its still on the same screen!
Hi GreenchiliNM,
Welcome to the Apple Support Communities! I understand that your computer is only booting to the Apple logo after running migration. You have done a great couple of troubleshooting steps already by trying a restart and trying to start in safe boot. I suggest you continue with the steps in the following article starting with the Reset the NVRAM / PRAM section and working down.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Reset the NVRAM / PRAM
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Reset the NVRAM / PRAM.
If the gray screen issue persists, go to the next section.
Thanks for reaching out,
-Joe -
my iPad mini is stuck on the Apple symbol. I have tried a reset and it shut down. When I turned it back on, the problem persists. Thanks for any help.
If the reset doesn't help, the next step would be to restore the device to factory settings using iTunes on a computer. If you can backup the iPad first, do so and then restore to factory settings. If it all works out properly, you can restore the backup after you finish. If you didn't or can't backup, the iPad will be erased when you restore to factory settings.
Use iTunes to restore your iOS device to factory settings - Apple Support
IF you can't restore that way, the next step would be to try using recovery mode.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
Plz help my ipad mini is just bringing the apple logo again and again and it is not working plz help
plz help my ipad mini is just bringing the apple logo again and again and it is not working plz help
If the reset doesn't work, you have to force iPad into Recovery Mode
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
My iPad4 switched off on it's own, and when I tried to reboot it, it gets stuck on the apple logo.(or sometimes a small loading whirlwind thingy) What should I do? Thanks
Sorry, I'm here, but I am at work.
If you do not have a backup and iTunes will not let you backup now, unfortunately you will lose everything.
I'm not sure that I understand what you saying about iTunes not nothing the device being plugged in, but I iTunes does not see the device that is one of the reasons that you need to use recovery mode.
If you are running iTunes 11 and you cannot see the iPad under the devices heading because you can't see the sidebar - go to View>Show Sidebar at the top of the screen in iTunes. -
Recently I erased an iPhone 3 so that it could be passed on and used by someone else, using the erase all content and settings feature. This has killed my iPhone and it is now stuck on the Apple logo. I have tried a restore in iTunes but recovery fails. This is not a jailbroken iPhone. Anyone have any suggestions on how to proceed?
If you haven't already tried, see if you can force it into recovery mode to restore it:
http://support.apple.com/kb/ht1808. If that doesn't work, the last thing you can try is to put it in DFU mode to restore it: https://discussions.apple.com/thread/2648467?threadID=2648467&tstart=0. -
My MacBook Pro fell and now when I turn it on its stuck at the apple logo screen with a loading circle underneath it. What can I do to get passed this?
Sounds like something internal was damaged in the fall, probably the disk drive. Take to Apple and ask them to fix it.
Allan -
My iPhone 5 is stuck on the Apple logo after trying to update it
My iPhone 5 is stuck on the Apple logo after trying to update it - brought brand new today
have you tried holding down the home button and lock button at the same time for 60 sec?
-
My Ipad is stuck with the apple logo after Ios8 install.
It wont turn off. It will reset by holding down the home and power button but only goes back to the apple logo again. Have tried plugging into Itunes
and it's not recognising it. It runs out of charge whilst charging and shuts down then restarts to the apple logo page. Any ideas??FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
Is there still a remedy for my hone that's stuck on the Apple logo every time I reboot. I can no longer get back to installing iOS6 again. Upon checking itunes, it said that there was an error in the download. I need help!
I have the same problem with iPhone 3GS, it wont connect to cell data after update to iOS 6.
everytime i want to connect to internet with any apps on my iPhone, i have to connect from a Wifi first.
this is frustating...
are there any solution for this? -
My ipod touch is frozen on the apple logo screen, I've tried everything on the trouble shooting page and nothing works, any suggestions?
Please tell us what you tried (the support page) to avoid wasting ours and your time.
-
Help! My iPad 3 is stuck with the Apple Logo, and iTunes is unable to detect my iPad.
I have a iPad 3 Wifi+Cellular. I just turned it on, and it's been on the Apple logo for 1 hour! What should I do? I thought I should go to iTunes, to see if I can do anything. But iTunes is unable to detect the iPad! I've tried all my USB ports, numerous times, and it is not working! What should I do? (I think I'm out of Warranty).
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
My ipad air is stuck on the apple logo
I really need some help, because I was using my iPad today and all of a sudden it crashed went to blue screen and turned off. Then I managed to turn my ipad air on, and its stuck on the darn apple logo for ages (hours). I searched ways on google to recover it, and I tried to do the recovery mode thing with iTunes (which worked), but then it said this ipad could not be restored, an unknown error occurred (4005). So I'm really lost on what to do, because this has never happed to me before.
Hi PinkUnicorn95,
Try doing these steps:
1. Quit out of iTunes
2. Re-Start the computer, (I hope this is a Mac computer)
3. Connect your iPad again and open iTunes,
If these steps doesn't work:
Download apple Configurator. (This is a apple app, which is freely available in the app store)
Install this and connect your iPad,
Using the default settings, (Leaving supervision off) press configure.
(This will download the latest drivers and update your device)
When this is done, you can connect to iTunes and put a backup you have on the iPad
NOTE:
If your iPad is not been backed-up as the latest version, then make sure to select " don't update device" on apple Configurator.
Let me know how you go.
All the best,
B -
I can't restore and make my ipad work. every time i start restoring it it gets stuck and error message (1603) pops on the screen.
Can anyone please help? Let me know what can I do to get it to work again.
ThanksCheck USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
The above comes from:
http://support.apple.com/kb/TS3694#1600
Maybe you are looking for
-
This all started when i went on vacation and used the wifi the resort offered for free. After 2 days i noticed my device kept saying low memory so i kept deletig some pics and videos but nothing crazy because i knew the videos i were deleting were me
-
I have a program that uses Bing Maps, but the map only loads after the second search.
On my website, I have an Agency Locator that uses Bing Maps to locate and display agencies near a zip code. In Chrome and IE, the map loads fine. If I clear the cache in FireFox, the map doesn't show up on the first search. The second search displays
-
I can't see my pictures in iPhoto 11
All my photos are blacked out and I can't open them, but I can view them as a slideshow. Any ideas how to get back to normal please?
-
Okay to use MacBook Pro without battery?
Now I fully understand that it is not such a great idea but I wanted to get some opinions: It's my third NuPower battery. All of them have lasted less than a year and failed pretty bad. This one started bulging quite bad and then I couldn't use the t
-
Hi Gurus. We have a system which is migrated from another R/3 system. Data is also copied over from there. So the owner of those PERNR and applicants as well as Org unit objects is the old system. Our ALE check (in table T77S0) is active. So the user