My ipad mini refuses to join home wifi connection. It is trying to do so continuously but with no success. I tried to reset all settings. Switched wifi off and then back on. Nothing works. The rest of devices are fine with the wifi. What shall I do next?
My ipad mini refuses to join home wifi connection. It is trying to do so continuously but with no success. I tried to reset all settings. Switched wifi off and then back on. Nothing works. The rest of devices are fine with the wifi. What shall I do next?
Maybe reboot your router. Unplug it for about 30 seconds or so and then plug it back in. Reboot your iPad while the router is powering up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Similar Messages
-
My iPhone 4S keeps on giving me an error message about my SIM Card. It either tells me invalid SIM or SIM Failure. The only way i can rectify this it to switch my phone off and then back on again, but this resolve only lasts for 10-15 Mins, and then the same error message appears. Any ideas on the best way to rectify my alleged SIM card issues?
Many Thanksi Had a simular issue years ago with my blackberry on ATT. As it turned out, my SIM had some issues. I would head over to your carrier and get a free sim replacement. It could be a phone or SW issue, but the Sim is my first guess give my experience
-
Frustratingly, since I upgraded to Yosemite 10.10, I too am having the worst problems with WiFi dropping out. I've never had this problem before on my iMac 27-inch mid 2011 model. Turning WiFi off and then back on again sometimes works. Help please. I've already tried a lot of your suggested fixes, but without success. Why hasn't Apple Fixed this?
Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter tab, if there is one. Uncheck the box marked
Wake for Wi-Fi network access
if it's checked.
Step 5
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 6
In the Wi-Fi settings, select
Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
Click OK and then Apply.
Step 7
Reset the System Management Controller.
Step 8
Reset the PRAM.
Step 9
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 10
Make a "Genius" appointment at an Apple Store, or go to another authorized service center. -
My new iPad mini can't install apps - I have updated to IOS 7.1.2 - I note that one possible solution is to reset all under settings>General but I don't see "reset" - please help
1. Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
2. Sign out and sign back in to iTunes and App Store
Settings>iTunes and App Store>Apple ID>Sign out and sign in -
after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
why can't i access my itunes anymore? whenever i click on it, it makes my laptop freeze/slow down to the point where not even ctrl alt delete works properly and i have to turn the laptop off and then back on to get anything done. it has been this way for the last 2/3 days now and i have uninstalled and reinstalled it but it doesnt work
Hello there, bobbiefromIRL.
The following Knowledge Base article goes over some great steps for troubleshooting your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have an iPhone 4 and since I updated to iOS6 I must hit the home button several times to return home or sometimes turn off and then back on. Any thoughts? Could this be related to running low on available storage?
Hold the sleep/wake button and the home button until the phone shuts down and let it restart.
-
one of my iPhone contacts messages go out as green, not blue, she has tried to turn off and then back on her messages, and it works fine for everyone but me. Mine go as green o her. My phone is iPhone 5, hers is the latest iPhone.
Hello SaSexton,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Have a nice day,
Mario -
since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.
since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.
-
My iPhone 4 alert volume keeps turning its self down even though the volume is turned up. The only way to correct is to turn the phone off and then back on.
YES! This is really killing me and you're the only one to bring it up in discussions! I constantly have to turn it off and on to get it back to norm, and this other reply about clean wiping in/resetting it is just too much of a pain in the @#*. I don't have the apple warranty, but do have verizon as a carrier with insurance. I wonder if they'll have a clue as to what to do, or just default to the idiocy that is the norm. Good luck to us both. Btw, I have the 4s..
-
I am not sure why or what happened but for the last two days every time I attempt to listen to any music I am limited to only two songs. I have tried multiple things but nothing is working. The only way for me to get more songs to play is to completely turn the application off and then restart it again. I have to do this repeatedly after only two songs. You can see that the music is still playing but I am getting no sound. Can anyone help with this? Has anyone ever experienced this?
if your minimum term contract has expired then the hub is yours and any warranty has expired. your monthly payments then revert back to standard terms and any discount you had at outset has ceased. you then go on a rolling monthly contract and the benefit of keeping that is you can move to another ISP with 30 days notice or 14 days if using a MAC code with no cancellation penalty
in the vast majority of cases if you renogotiate a new contract you can get a better cheaper deal that you are currently paying but you then lose the ability to move at short notice without penalty
you can always phone the options team who are uk based and see what is on offer, including negotiating a new hub, and if you don't like the offer then don't accept 0800800030
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
I'm getting a new phone and was wondering if I could sync a non gamecenter game onto my com.from my old phone and then back it up to my new phone and the KEEP MY PROGRESS
Hi,
The below link shows how to create playlist in Itunes. Once the playlist is created, if you are using apple Ipod or any other apple product. Then once you connect the device it will start the sync with the device and then you can start playing.
http://support.apple.com/kb/PH12340
If you are using another device, then please do mention the device to which you want to sync the music and which player are using on the system.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem. -
When i plug my Ipod touch 4th generation in it goes to the apple screen and then shuts off and then turns back on and goes to a solid blue screen.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have an iPod Nano generation six, and since I had to get a new hard drive on my Macbook pro, the nano no longer registers in iTunes. My other devices show up fine. I have followed all the trouble shooting advice,and nothing works.
This is the ipod touch forum
-
I have ms office 2011 for mac. I cannot open the "word" program. Everything else powerpoint and excel works just fine. The problem is with word only. The icon just bounces until I force quit. I tried to reinstall, repaired permissions, etc. please help.
Try posting on the MS Office for Mac user forums - here's a direct link to the Word forum - http://answers.microsoft.com/en-us/mac/forum/macword.
It might be that you just need to update. Do you have the Office updater set to check for updates every week or so? Note that the updater actually only works when you restart or cold boot.
Try the forum - they've always been very helpful for me...
Clinton
Maybe you are looking for
-
Very slow OracleDataReader.Read or HasRows ???
Hi, I'm experiencing huge performance delays when calling Read on OracleDataReader -. It takes for ages -.. I waited for 2 minutes then stopped the execution in my .NET application- If I run the same SQL statement in Toad for Oracle it returns in les
-
How do I get the Principals as well as the Permissions from Policy?
I know how to get the permissions from a Policy: MyPolicy.getPermissions() How do i get the Principals and Permissions? If I have: grant MyPrincipalClass "Jeff" { permission MyPerm "doIt" how do I then (in my code) get both the permission and th
-
How can I stop Itunes from opening by itself?
Itunes keep opening by itself and it's getting pretty irritating at this point. I haven't purposefully gone into it in days, but it keeps popping up and starting to play music anyway. I quit it every time, but then, sooner or later, the same thing ha
-
%@ include file= ... does not work properly in Portal
I am devloping a portlet based on a jsp that uses some <%@include ..> tags. I have a problem in that variables declared and used in one jsp is not visible in a jsp that is included later on. Also, the scope of the page import tag of the main jsp does
-
Aironet 350 Failure...Twice
A couple of months ago, I installed three Aironet 350 Bridges, each connected to directional antenna via LMR400 cable. The directionals are pointed towards an access point at the front of the campus. After abou 36-48 hours of use, the ethernet ports