My ipad no longer copies or pastes after my last upgrade of OS

WHen i try to copy and paste, it flashes so quick and disappears that I cant click it. Only since the last upgrade to my tablet.

I have had it stop sending/receiving calls 3 times now... the first two times the problem went away the next day, but this time I am two days out and still not working.
I have not replaced my phone, I am afraid to do it because from another thread that I read, it usually doesn't fix the problem.
Here is the other thread I found: I can't make or take phone calls, but i can message and use data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, two of which have this problem and one just stopped working all together.
My problem started on day 15 so I couldn't just get a replacement at the store, had to get a rma to get a replacement. If you have only had the phone for 3 days you might want to go to your store and have them replace it with a new one. Me, if I could I would switch to another phone, but it looks like I am stuck with the S5 for now.

Similar Messages

Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6

Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!

Restore ur iPad to iOS 5 or 6( if u have downloaded)
<edited by host>
Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
Then set up your iPad as a new iPad .
Here you go, Now your iPad will be perfectly fine..

The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

PROVA

Yes, I know that, but I ever work with the right mouse button,
because selecting groups and subgroups with double click make some confusion for me.
Regards,
Fabio
ufficio tecnico
grafica e prestampa
Via Verdi, 11 - 43058 Sorbolo (PR)
Tel. 0521.694111 - Fax 0521.694360
E-mail: [email protected] <mailto:[email protected]>
E-mail: [email protected] <mailto:[email protected]>
Web: www.litoexpress.it <http://www.litoexpress.it/>
Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
You can double click on the selected object to get into the multilevel isolation mode.
Regards,
Satinder
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

After the last upgrade of OS X Mountain Lion I can't seem to adjust screen brightness anymore. Why and how do I solve this?

My screen brightness used to adjust itself and if not I could use f1 and f2 keys. After my last upgrade of OSX Mountain Lion, these do not seem to work. Does somebody know what happened and how I can return to the original situation?

Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Resetting your Mac's PRAM and NVRAM
http://support.apple.com/kb/ht1379

I cannot get Apple to send verification email for Icloud after the last upgrade

I cannot get ICloud to work after the last upgrade on iphoto?

explain the crash... perhaps recovery might be more useful than new settings.
what is wrong with these settings https://autoconfig.thunderbird.net/v1.1/mindspring.com

The license for Win10 after the last upgrade to 10049 is still valid up to April 15th and not to October 15th

I installed the first preview of Win10. Which would be valid for up to April 15th. After the last upgrade the preview screen shows build 10049. Valid up to October 15th. But Windows is not activated. I tried to activate. Response: wrong key. (...-9D6T9).I
tried to change the key with the new one given in the nowadays downloading pages (...-233PK) Response: this key is not valid for the version is installed. So do I have to download the whole setup again and reinstall it to my pc?

There are only 2 product keys..........
For Pro ( non-Enterprise ) version it is : NKJFK-GPHP7-G8C3J-P6JXR-HQRJR
For Enterprise version it is : PBHCJ-Q2NYD-2PX34-T2TD6-233PK
Look to the bottom right of the screen it tells you which version you have........

Weird problem after the last upgrade(10.4.8)

Hello all,
I am using a 1.66mhz MacMini with intelcoreduo. After the last upgrade
2weeks ago. I begun to encounter weird behaviors(those does not happen
all the time, but happens..) from my mac. I'll try to list those
behaviors below:
- trash can sometime can not empty, I have to open the thrashbin and
delete manaually by selecting each file to delete
-finder failing to open a new window.
- when i take screenshot, it only appears when i try to find it over spotlight
- and worst of them all, recent files downloaded on my desktop disappearing sometimes and only way to reach them ise search on finder, when spotlight finds it, it appears back again).
These are all so weird kinda behaviors. I am curious if any of you
having the same problems, or rather these problems has been allready
pointed.
Kind Regards,
alper,

I've seen some of those before but on a G4 Tower, so far never on my Intel Mac Mini.
I've seen screenshots not appear on the desktop until much later or when a new file is brought or created on the desktop. Likewise, I've seen the same behaviour with some files I've downloaded (to a specific downloads folder).
I remember stuffit 9 or 10 had a bug similar to this where when you expanded a an archive it was "empty" until you moved a new file into the folder or made a new file/folder in it, then it would show you the files that were actually in the expanded archive.
Try repairing your permissions and booting from your Mac OS X install disc and running disk repair.

Iphoto on ipad no longer sees my photostream since IOS 7 upgrade

iPhoto on my ipad no longer sees my photostream in the albums page of the iPhoto app since IOS 7 upgrade??
I can see my photostream and shared photostreams in the ordinary Apple photo app on the iPad. Prior to IOS 7, all these photostreams were visible in the iPhoto app's albums page. What has changed? Its' most annoying as I was relying on my photostream in the iPhoto app as my source of photos for my journals.
Any suggestions please???

I've just had a long chat with Applecare in Colorado. Very helpful they were.
I can confirm that the "new" IOS 7 version of iPhoto app on all IOS devises does not support your my photostream nor any of your pre IOS 7 upgrade shared photostreams.
Any new post IOS 7 upgrade shared photostreams will be visible in the iphoto app. I have tested it and it works fine. But all your pre IOS 7 shared photostreams and existing my photostream remain invisible to post IOS 7 iPhoto app.
This "improvement" to iPhoto on IOS devises is now a lame duck. Why ! I'm now on the lookout for a better photo journalling app for my iPad.

Long time WORKBOOK opening after technical system upgrade

Hi Gurus!
After BW technical upgrade (from 3.0B to 7.0) we have a problem with long time workbook opening (more than one minutes without refreshing workbook queries). After system upgrade we are still using BEx Analyzer 3.X version because our workbooks are not convert yet.
Thank you very much for your responses!

Good evening,
Have you looked into any of the SAP Notes for 3.x performance?
Check out Notes 1364801 & 1291789
These Notes may be helpful for you.
Regards,
Karen

Problems with GNOME After The Last Upgrade

I have too many problems these days with my Arch box.. And I don't know when or how these problems are solved but I'm really bored about having problem all the time. I don't know all of these are bugs but if they're I'm ready to enter some bug reports.
1) After the last update, Metacity doesn't start automatically. So everytime, I don't have my mouse theme, my thema of borders of the windows, the notes I took with gnome's note applet doesn't disappear.
2) gnome-power-manager is never the same that I used to.. I just found that killing and rerunning it is at least make it work. But it's menus and options is not rich as I was earlier times. It doesn't say that much as it did in the earlier times.

I've same problem with gnome-power-manager, it works only when i kill it with killall gnome-power-monitor and re-run it.
About metacity i don't have problem with it.

Ipad no longer connects to internet after using remote app for apple TV

I can use the Remote app on my Ipad to connect to Itunes library through my apple TV but as soon as I do that, I can no longer connect to the internet on my Ipad. The network stays connected on my Ipad but no internet. I have to recycle the router (airport extreme) and power off the Apple TV. Once I do that I can then connect to the internet again. I am using a Mac Pro as my desktop with airport extreme as my router. All software is up to date. Appreciate any thoughts anyone might have. Its a pain to use that litte remote for my Apple TV.

My question: Is it normal for the internet connection to switch from an Apple Network to another network?
No.
You are probably connecting to a neighbor's wireless network. Unplug your base station and see if the network remains.

Videos take a long time to open after the last quicktime update

Hey guys
Since I've downloaded the latest quicktime update videos are taking a very long time to open. They used to open instantly and now they take about 40 seconds (negligable difference if quicktime is already open or not).
This is with a Powermac G4 1.25Ghz with 2GB RAM running 10.4.10 and all latest updates.
Any suggestions on how to fix this?

I'd suggest tracing system activity when this long runtime issue occurs, so you could know where this time is spent (db access ? etc) ... a plain SM50 call in parallel could do the trick if runtime is long enough !
Chris

IPad 2 home button went dead after iOS 7 upgrade

A few months ago I upgraded to iOS 7.0 a couple of days back. I haven't been using my iPad much ever since. And till now I have been using it scarcely. So I was quite shocked to find that the home button went dead today. For no rhyme or reason that I can think of. Upgrading to iOS 7.0.3. Hoping this solves this issue. Meanwhile any suggestions, welcome and appreciated.

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

HT4623 my iphone 4s is no longer being recognized by any computer after the last upgrade, is there a way to reinstall the ios without a computer?

I have tried changing the cable, reinstalling itunes, reset and hard reset on the phone, and it still is not working... Is there anyway to re install the os from the phone?

Have you tried rebooting the computer as well? Shut it totally off, then restart it and try again.If you are already on iOS 6.1.2 as your signature states, the only way to install an update/restore the phone would be to connect it to the PC.

IPhone 3G (PAYG) now no longer appears in iTunes after attempt at upgrade

I did the correct procedure for upgrading to 3 (latest OS, latest iTunes) and it downloaded okay but then stalled on the back up stage. The G5 invited me to unplug and plug iPhone back in but that did not work. I have since tried repeated unplugging and plugging of the phone, switching off and on of the phone and the computer (including a safe boot). I have replaced the iTunes application and its prefs. I have tried different USB sockets and I am wearying and wondering if the thing is broken. I expected server access problems and slow processing but this I did not expect. I can't restore the iPhone. I have even tried launching the new software from within Users/Me/Library/iTunes/iPhone Software Updates/iPhone1,23.0_7A341Restore.ipsw. Totally baffled, the iPhone will not even go into charging mode, though it appears to work otherwise. Help!

Eventually solved - I think it was traffic on the server

My ipad no longer copies or pastes after my last upgrade of OS

Similar Messages

Maybe you are looking for