My Ipad's repeatedly  asking for activation and can't be activate through cellular data, what could I do?

MY Ipad's repeatedly asking for activation, even though I activated 20 times, not kidding! And the worst is I can't activate it through cellular data, for no good reason. Yes, I checked the setting for the cellular data about itunes and so on. I also tried to reboot, to remove and put back the sim card. I also tried to send a request to apple support, but the f... button in the email sent doesn't work. I'm kind of ****** off, cause I couldn't use my ipad all the last evening till I get to a wifi zone... What the **** is going on with Apple? It's getting worst and worst... I have a ipad retina, not the last generation, but the one before... Not sure which number it is though.

I understand the question fully. Your issue is that the activation does not seem to be registering nor working properly (which is why you keep being asked to activate it). Maybe activating through Wi-Fi will activate the iPad properly since as you say yourself, "I can't activate the Ipad by cellular data." I don't think it would much more trouble to try it through Wi-Fi and could very well solve your issue.
A question does not come up though...which activation are you actually talking about? The initial activation of the iPad for use (when you are first setting up the device) or the activation for cellular data with the device's cellular data carrier for use on the device? My initial response was for the first scenario.

Similar Messages

  • I updated my ipad to ios 8 and now my ipad is locked asking for activation when i put it doesnt accept my apple id do you have a solution?

    i updated my ipad to ios 8 and now my ipad is locked asking for activation when i put it doesnt accept my apple id do you have a solution?

    Did you by this iPad new? Or used? If it was a used iPad, you'll need the Apple ID login for the original owner. If you bought it new, contact AppleCare with proof that you are the original owner and they may be able to help you.

  • HT201441 My phone was stolen and my icloud is loged in and now my ipad is disabled and now asking for activation and it says there that i have to put my icloud account and i tried loging in my account but it says that it cannot open with that icloud accou

    My phone was stolen and my icloud is loged in and now my ipad is disabled and now asking for activation and it says there that i have to put my icloud account and i tried loging in my account but it says that it cannot open with that icloud account what do i do????

    Welcome to the Apple Community Robin.
    Contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.

  • Been using an ipad 2 without passcode for quite some time. While upgrading to ios 7, I enabled Find Iphone on the Ipad. It asked for passcode and I gave one. Now I forgot it.

    Been using an ipad 2 without passcode for quite some time. While upgrading to ios 7, I enabled Find Iphone on the Ipad. It asked for passcode and I gave one. Now I forgot it. Connected it iTunes (on my windows 8 system) with which I sync and that too required an update as old version of itunes cannot read ios7. Problem is itunes does not want to get updated. Some vague error on not having right to write a file in ProgramData folder wheras as an admin i have full rights. Next I downloaded the install file from itunes site - no luck it would not install. Then I tried to remove itunes - it does not want to go. Am at wits end... Is the option only to restore it as a new Ipad?

    Place the iPhone into recovery mode and restore the iPhone with iTunes on your computer.
    http://support.apple.com/kb/HT1808

  • Why Does Logic Pro Repeatedly Asks for Serial # and XSKey When Started?

    I've purchased and installed an upgrade to Logic Studio 9. I previously used Logic Pro 7 but did not have it installed on my MacBook Pro when I installed Logic Studio 9.
    The installer asked for the Logic Studio 9 serial number which I entered and then prompted for the original serial or XSKey. I dug out the Logic 7 XSKey, plugged it in and it was accepted so I could continue with the installation which completed successfully.
    So far so good.
    But now Logic Pro 9 asks for the serial number and XSKey every time I run Logic which isn't what I expect. I re-enter the new serial number and then plug in the XSKey which is accepted and the software runs as expected, but I would prefer not to have to do this every time I start the application, in particular because I don't want to carry the XSKey around with me at all times.
    Why isn't Logic 9 storing my serial number? Why does it ask for the serial # and XSKey every time I start the application?
    I'm not running Logic as an admin user. Could this be preventing Logic from storing the serial information?
    Any help would be greatly appreciated.

    I had this when upgrading from 7 to 8. What I did was plugin the xskey BEFORE I started the upgrade and it never asked for a key or serial again after that.

  • Why did my i phone crash, then restart, then ask for activation and when i type my correct Apple ID it wont validate it

    When i was facetiming my friend my phone had crashed, I could still hear her so i thought nothing of it, then all of a sudden my phone had restarted i thought it was nothing either due to it happening because its so old, then i checked and it told me to activate my phone , so i used my Apple ID and it didn't work even though it has been linked to my phone for 7 months, when i checked the email that was connected it wasn't even the same email, it was shorter, so now i dont know what to do help please. My iPhone is a 4s with IOS. 8

    i had this problem, i turned off imessage, turned off phone, turned on phone, turned on imessage and let it reactivate.

  • Multiple requests for activation and can't find *.joboptions

    Now sure what happened...but something trashed my Adobe Acrobat v8 Standard installation so I uninstalled Acrobat and re-installed the program from disk, Ver 8.0, I ran through a couple of upgrades to 8.1.3...
    Now when I boot up the the PC (Win XP w/all updates) I get this error message...
    Can't find: documents and settings/All Users/Application Data/Adobe/Adobe PDF/Settings/*.joboptions
    and I am continually asked (10+) to activate the program, which I do...
    I've run my registry cleanup program...still have these problems...
    Under Docs & settings/all users there isn't an Adobe PDF folder.
    I found it under my user application data along with several other folders:
    Acrobat, Adobe Acrobat, AIR, Flash Player, Linguistics, LongTransport2 -- there's also another folder named AdobeUM
    Frustrated and looking for help / Thanks

    Can you confirm you have verified your password via webmail?
    What error message do you get when entering the password in the Thunderbird password prompt?
    I'd be surprised if you can still receive mail without being prompted, when Thunderbird didn't save your password(s).

  • HT4061 after  reseth    no  home  page   asking  for  activation   but  not  activating

    I  had  my  Iphone  3gs  reseth   after  reset   asking for   activation   when  I  click  to  activate      a note  comes up  it  can not  be  activated  the  server  is temperarly unavailable        no matter  how  many  times  I  tryed

    When you said you had it reset, did you not do this yourself? Has the device ever been jailbroken? Try this support document and restore the device http://support.apple.com/kb/HT1808.

  • HT201441 Hi Just bought ipad 2 off someone they showed it to me working and the removed it from icloud and reset. now have started to setup at home and it is asking for an apple id he or i do not know what should i do ?

    Hi Just bought ipad 2 off someone they showed it to me working and the removed it from icloud and reset. now have started to setup at home and it is asking for an apple id he or i do not know what should i do ?

    Restore the Device as New.  See Section 6 here... http://support.apple.com/kb/HT4137
    Note:
    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818

  • I'm setting up my new ipad air and it's asking for id and password, but not accepting it. help me

    i'm setting up my new ipad air and it's asking for id and password, but not accepting it. help me

    If it is asking for an APlle ID password for an ID you do not recognize then you have stumbled upon the Activation Lock feature of IOS7.
    Read more about it here:
    http://support.apple.com/kb/HT5818

  • CS6 and Premiere Elements keeps asking for activation

    Hi
    I am a system engineer in a school. We have a K12 Site license for CS6 and we purchased about 30 single license versions of Premier Elements through certified resellers. I deployed CS6 a few years ago on our old PC's by installing the software on one computer and then cloning the pc 30 times with CloneZilla. That worked fine.
    A year later i repeated the procedure on 25 other computers. No problem there.
    Last summer i did the same to replace the 30 pc's i had cloned the first time. Since then i have to activate CS6 over and over again indicating a trial version. Also the other classroom with 25 pc' began to ask for activation after 2 years with no worries.
    In oktober i Installed Premiere Elements on each individual computer one by one. And that went well for a few months but then all of a sudden PE began to prompt for activation. My collegues drive me crazy with their remarks and worries.
    So far i tried to activate CS6 by creating a serialization file with the adobe application manager. When i run the file and retry the program i am no longer prompted for an activation... for a while.
    There is no way to tell which device will prompt of when. It is random. Sometimes it is just one device, then all of a sudden it are 3-4.
    Please help
    Maarten

    Hi Maarten,
    Adobe Premiere elements 12 (individual license) requires sign in /activation if you have installed individually however you can suppress the sign window using Adobe provisioning toolkit
    In case you have Adobe volume license for PRE 12. Please visit the link below to find the workflow.
    Deploy Premiere Elements 11 and earlier | Windows
    Thanks,
    Ashish

  • Bought the iPad . Asks for activation, but he is a friend who forgot my login, but remember the password. What to do? I want to completely reset together with his id. How to do this?

    Bought the iPad . Asks for activation, but he is a friend who forgot my login, but remember the password. What to do? I want to completely reset together with his id. How to do this?

    AleksandrD wrote:
    Bought the iPad . Asks for activation,
    The Apple ID and Password that was Originally used to Activate the iDevice is required.
    If you cannot get this information from the seller
    Removing a device from a previous owner’s account
    You need to return the Device for a refund, as you will not be able to re-activate it.

  • HT201263 my ipad is still asking for the passcode while restoring and its dispalying and an error message

    my ipad is still asking for the passcode while restoring and its dispalying and an error message. what should i do because i cant acess my ipad anymore. someone help me.

    Try and force iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • My ipad is asking for activation

    i installed IOS 8 and the installation did not finished and i unplugged the internet connection , now it asking for activation but i forgot my apple id and password any solution

    I know that you are trying to solve this immediate problem right now, but I want to speak to the issue after you have solved it. When it comes to your Apple ID, your password and other passwords in the iOS devices, you really must remember them or write them down amd put it in a secure place (not just laying around). Your Apple ID and password is critical for all the various things you do in the iPad. And if you get the two-factor authentication then you REALLY must remember (or put away safely) that emergency password they give you. This is critical and it will save you a lot of trouble and headaches in the future!

  • HT4623 I have never had a passcode to lock  my iPad. Now that I have updated it with IOS7 it is asking for one and is locked. How do I unlock this without having to reset the whole thing through iTunes????

    I have never had a passcode to lock  my iPad. Now that I have updated it with IOS7 it is asking for one and is locked. How do I unlock this without having to reset the whole thing through iTunes????

    Unfortunately, if the iPad is insisting that you use a passcode, there is no way around it other than to restore the device using iTunes on a computer, or by erasing it in iCloud.com via Find My iPhone.
    You could try resetting the iPad and cross your fingers and hope this is just a blip on the radar....hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

Maybe you are looking for

  • Unable to make payment via BlackBerry world | AW10006c

    I have been breaking my head with this for the past two months.  I live in India. The problem I am facing is that I'm unable to purchase any app from BlackBerry world. If I use a credit/debit card, it gives me a AW10006c error.  I thought this was du

  • Mail is delivered as soon as it arrives at gmail server instead of every hour as I requested

    I have set my mail preferences to get mail every hour. But mail arrives when it arrives. It can be every few minutes. This has been going on for a while (Not helpful, I know, but bear with me.) For the last few weeks I have been getting an exclamatio

  • Limit shopping carts in extended classic scenario

    How can we implement limit shopping carts in extended classic scenario. Has anyone done it? Thanks in advance

  • Character Codes 10 and 13 in Tj operator

    Hello, I have a question about usage of character codes 10 and 13 in a Tj operator. I Have created a small test document with an type1 font (not embedded) using WinAnsiEncoding with Differences mapping 10 to X and 13 to Y. In a Tj command using quote

  • Sales oder,delivery and billing time

    Dear, i want to create a report  where i reuire order time,dleivery(picking,packing,loading and goods issue time) and invoice time.plz can u help me where i can get detisl of these field and tables sepcially goods issue time .can i do it in sqo2 or i