My ipad screen won't turn one way when I turn/bump my ipad (will do one side but not the other)

My ipad screen won’t turn one way when I turn/bump my ipad (will do one side but not the other)

Yes there is a rotation lock setting.
First try the switch above the volume rocker. If that doesnt work then double click the home button. It should display a multitasking bar at the bottom of the screen. Slide that to the right and it should display a few settings including screen lock. Make sure that it is unchecked.

Similar Messages

  • When i add an entry to my ipad calendar it syncs with my iphone but not the other way round. Icloud is turned on on both.

    When i add an entry to my ipad calendar it syncs with my iphone but not the other way round. Icloud is turned on on both.

    Do you have iCloud?
    As it states hereyou need it tp sync.
    Allan

  • FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away

    FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away.
    Hope you can help.
    I have added a new email address but kept my Id, but I get busy when trying from iPhone to iPad as they are clashing. Like find my iPhone app hence trying to keep them all on one account

    IOS: using facetime http://support.apple.com/kb/ht4319
    using an ipad will use the email address since you can't make a phone call.  see the link.
    Your basically calling/emailing yourself that's why your getting a busy signal.

  • I have programmed iCal and Address book to sync via MobileMe. The info I type in iCal and Address Book on the MacBook Pro gets updated on the iPad, but not the other way around. Any hints?

    I have programmed iCal and Address book to sync via MobileMe. The info I type in iCal on the MacBook Pro get updated on the iPad, but not the other way around. Any hints?

    Levi G B ... Also found another thread by Davidfromsurfside on 10/14/11 0703A with the same problem. I responded on his thread "I have the same problem. IOS5 on iPad1, iPad2 and iPhone4S all with iCloud on. Lion 10.7.2 installed on my MacBookPro and iCloud set up/on. Any new iCal entry on either iPad or on the iPhone ends up via iCloud on both iPads and iPhone. BUT NOT ON THE MacBookPro. And iCal entry on the MacBookPro does NOT GET SENT to iCloud.com or to either iPad or the iPhone. This is a huge problem for me because I do all my office scheduling on the iPad or iPhone but rely on the MakeBookPro to print out daily client lists. I REALLY need to get this fixed...it is causing major business issues. " No one so far has had a fix....  :(

  • HT5622 How do I set icloud on 2 ipads.It recognises one,but not the other one?

    How do I set up icloud on 2 ipads? It recognises one but not the other one.

    Hi Leora Beisly,
    Thanks for visiting Apple Support Communities.
    Before setting up iCloud on your devices, I recommend updating to the latest iOS software version. This will ensure that you can use all of the iCloud features on your devices. See this article for information on updating your iPads:
    Update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht4623
    Next, see this page for iCloud setup instructions:
    iCloud: Set up iCloud on your devices
    http://support.apple.com/kb/PH2609
    Before you can use iCloud on each of your devices, you need to sign in to iCloud using your existing Apple ID or a new one, then turn on the iCloud features you want to use.
    You may have set up iCloud on your iOS device or Mac when you first used it. To make sure it’s set up correctly, or to set up your iCloud account on another iOS device, computer, or Apple TV, go to the set up iCloud website listed below.
    Important: Be sure to use the same Apple ID when you set up iCloud on each device.
    Best Regards,
    Jeremy

  • TS1702 I have recently begun to use Pages and want to transfer a document between the iPad and my PC. I can transfer to the iPad, but not the other way, and am told I do not have sufficient 'privileges'. What does this mean? Also can't use iCloud with Pag

    I have recently begun to use Pages and want to transfer a document between the iPad and my PC. I can transfer to the iPad, but not the other way, and am told I do not have sufficient 'privileges'. What does this mean? Also I can't use iCloud with Pages between the iPad and PC,  although I purchased extra storage in order to do this.

    If you have a PC, you don't have Pages on it. You can transfer Pages presentations to/from iCloud via http://www.icloud.com , however -- you just won't have an app on your PC to deal with Pages documents. Make sure that you have your iCloud account properly configured on your iPad.

  • Airdrop works one way but not the other?

    There are two Macbook Airs in my house, both new models (one 13" the other 11"). Airdrop appears to work from the 13" to the 11" but not the other way around. The error message in the console is:
    29/07/11 11:09:49.684 PM Finder: WormholeClient::didFail(kCFErrorDomainCFNetwork, -1200, "An SSL error has occurred and a secure connection to the server cannot be made.")
    I've tried logging in to another (new, clean) user profile to see if there was some kind of conflict going on, but that didn't make a difference.

    It's the firewall settings. It seems like a bug, because in the firewall I had Finder set to allow all incoming connections.
    Do the following:
    - System Preferences, Security, Firewall, Advanced settings
    - Remove the entry for Finder by selecting it and press the minus button
    - Check allow signed software
    - Uncheck block all
    It's working for me now.

  • HT2731 I have 2 apple iPods on the same account, And they have the Same songs on them. How can I get a new account for one of them but not the other? Can I wipe the memory of 1? How would I do that?

    I have 2 iPods one I don't use anymore. I would like to make a new account for one but not the other. Is that possible? If I wipe the memory in one will the other wipe out too? How can I do all of this?

    You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
    You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

  • "No connectivity with the server" error for one document but not the other, in the same document library

    We have a number of users all of a sudden getting "No connectivity with the server.  The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
    just by clicking the link and selecting the "Read Only" option.  If they select the "Check Out and Edit" option, they can open the document no problem.  One of my customers gets the error on one document but not the other, in
    the same document library!  The older document (a weekly report) was copied and renamed as per standard procedure.  She can read the older document, but not the new one.
    It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error.  We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
    created profile does not experience the error for these people.  Renaming the profile back restores all their personal settings but the error reappears.  When we copied the old profile's folder structure into the new profile, many of the user settings
    were restored (but not all, like Dreamweaver settings) but the error did not appear.  We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy.  We are rebooting between
    logons to make sure all files are unlocked.
    The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
    2005 SP4.  SharePoint is 64bit MOSS 2007 with the latest CU.
    We've checked the logs on the client as well as on the server and there aren't any helpful entries.  We've also run Process Monitor, also with no helpful entries.  We're planning to run something like Fiddler next.
    It's not everyone, because there are many people are accessing the SharePoint system and the same files.  It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes.  One person experiencing
    the errors is a Site Collection Admin.  That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file.  They were able to open it Read Only no problems that day, but the next day, the same
    file gave them an error.   In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
    We've tried lots of things including:
    Deleting IE cache
    Deleting SharePoint Drafts and webcache folder contents
    Running IE without add-ons
    Upgrading and Downgrading IE
    Uninstalling and re-installing IE
    Reinstalling our SSL certs
    Repairing Office
    Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool 
    Deleting all HKLM and HKLU Office registry settings
    Toggling IE Compatibility Settings
    Toggling the IE Automatic Logon option
    Toggling the location of checked out files
    Adding the site in the trusted sites list
    Adding the site to the WebClient\Parameters registry locations
    Making sure the WebClient service is started
    Rebooting the machine (lol :)
    This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing.  There aren't
    "check out" workarounds for some of those macros.
    We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next.  Thanks!
    -Richard.
    PS  I think this needs to be in the "General" forum instead?

    It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes.  It helped tremendously that my own machine was throwing the error.  I have scheduled a couple of users to work with me to test the
    various fixes, to see which one works best, so the story isn't over yet.
    I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done.  I made a copy of the profile folder and was using that for awhile,
    but then made another copy where I had deleted a lot of content out of it so that the copies would go faster.  Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
    to get back to work.  Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore.  The concept was to keep as much as the users profile
    in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
    When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error.  I then tried xcopy, but got the "can't read file" error.  Then I tried robocopy, and ran into the "junction" problem. 
    I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
    So the process went as follows: 
    Reboot and log into the machine as another user
    Delete the profile and associated registry key
    Reboot and log into the machine as the affected user, creating a new profile, and there is no error
    Reboot and log in as the other user
    xcopy the contents of the skinned-down backed-up profile to the newly created profile
    Reboot and log in as the affected user, and the error occurs
    Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
    I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring.  That was strange, because we've cleaned out the cache folders
    before which didn't fix the issue. 
    So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
    What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
    One way to do this was to:
    Reboot and log in as another user
    Rename the c:\users profile folder
    Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
    Reboot and log in as the affected user, confirm that there is no error
    Reboot and log in as the other user
    Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
    Delete new profile folder, and rename the backup to be the production folder
    Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
    Reboot and log in as the affected user, confirm that there is no error
    We've tried this on a couple machines and it works.  I had to run Windows Explorer as Administrator to access the other profile's folders.
    We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
    We may attempt to script this, but the self-help instructions are only 5 lines long:
    Reboot and log into the affected computer with another account
    Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
    Run Windows Explorer as Administrator
    Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
    Reboot and log into your normal account, and confirm the error is gone
    I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

  • Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

    Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

    Thanks for the interest. Preferences are similar on both machines: screen sharing, file sharing, printer sharing & scanner sharing all ticked and radio button for Screen Sharing is ON.
    My confusion is that I can get a network connection to the iMac by selecting "go to server" on the PowerMac running 10.5.8 but am unable to make the iMac connect to the PowerMac using similar selections. When ethernet cable is plugged in the PowerMac shows up on the finder bar on the iMac, but it does not allow either screen sharing or connection to occur - a dialog box tells me to check System Prefs and Network connection.
    I'm hoping to export a large file of photos from iPhoto on my iMac to my wife's PowerMac and hoped to achieve this with an ethernet network connection.

  • TS2972 home sharing will work from computer to apple tv but not the other way?

    home sharing will work from computer to apple tv but not the other way?

    Home sharing is one thing, physically copying is another thing.

  • Syncing of calendar works only from icloud to iphone but not the other way round

    My iphone is suddenly not syncing with icloud anymore. I sync only the Calendar (ical). From the icloud calendar to the iPhone calendar syncing is working but not the other way round. I was at a genius bar but they could not solve the problem. Apple phone support suggested nothing I haven't tried like reboot etc. Any ideas how to solve the problem?

    Go to Settings>Mails, Contacts, Calendars, scroll down to Calendars section and check the Default Calendar. Must be the iCloud calendar. If you don't see this option it means that you have only the iCloud calendar in your iPhone. In that case try to turn off the Calendar from iCloud settings and turn it back on after few seconds.

  • How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
    I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    https://www.google.com/calendar/iphoneselect

  • I able to copy and paste files from external hard drive to mac, but not the other way around. Please suggest. Thanks

    I m able to copy and paste selected files from external hard drive to my mac but not the other way around. Im not able to copy files from Mac to external hard drive.
    The same is working fine with USB flash memory.
    Please help.

    Vijay Raymond Daniel wrote:
    The only thing is we need to buy this software. if there is a free solution to inter change files between NTFS and HFS it would be better,
    Don't use NTFS, remove your data off it first and change the format to something the Mac and PC can read, but doens't cost money or require software.
    Drives, partitions, formatting w/Mac's + PC's

  • Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

    Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

    c.pfaffenbichler wrote:
    Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
    And what kept you from posting a screenshot?
    I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos.  You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
    It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image.  I've uploaded it at the size it was supplied to me at (about 2700 pixels wide).  So
    Click to open the full image, right click and copy, and paste into Photoshop.
    Select the clone tool, and set its blend mode to Darken.
    Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
    Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
    It works even better if you clone on a new layer also set to Darken.  No masking, just Photoshop blend mode magic.
    You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
    Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

Maybe you are looking for

  • Text messages going to wrong person

    This issue has been reported for quite a while and is still occurring yet I do not see that Verizon is acknowledging it. I have also seen where it might actually be an Android O/S issue but it still needs to be addressed by Verizon.  My personal expe

  • Why is Encore producing such bad standard definition DVDs?

    Hi everyone I really need your help, Encore makes me wanna pull my hair out. We just switched from Final Cut Pro to the new Adobe CS6 Production Suite so I am fairly new to this set-up so please point out anything that I am doing wrong, any pointers,

  • Flash Drive or HDD?

    Am I correct in thinking that the 16GB iPod Touch uses a flash drive instead of a HDD? Thanks......

  • Process Chain in BI7.0

    Hi, What are the steps to create Process Chain in BI What are the difference between BW 3.5 and BI7.0 PC? Regards, Jackie.

  • CWA redirect issue and access across the WAN

    Hello, I am trying to get CWA working on my wireless ISE setup and am having an issue where the guest portal redirect is pointing to the wrong port.  My setup is as follows: The PSN has two connections - Gig 0 is on our management VLAN 172.24.x.x  Gi