My Ipad shows the Itunes logo with connecter cord and arrow but wont turn on. How do I fix?

In need of some help, my Ipad turned off two days ago. I pushed the home button and the start to reset. Now it shows the Itunes logo with the connecter cord and an arrow. I plugged it into my PC, and there was an update for my Ipad. Waited the three hours for the update and disconnected hoping that everything was fixed. Would not turn on again so held the start/home and it still shows the Itunes logo, and when I plug it into my PC, Itunes will no longer open. I live three hours away from the nearest Apple store and would like to get it fixed at home if possible.

Did you expect iTunes to start automatically or did you start it yourself? Start iTunes and then connect the iPad.

Similar Messages

I tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on

i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on

Did you try to connect in recovery mode to your computer, explained in this article?
iOS: Unable to update or restore

Tried to upgrading ipad 1 from itunes and l guess it did not complete because all I have showing on the ipad is the itunes logo with the usb cable. when l try to connect it to my system, it resquest that a driver be used to install the device. Pls help

Tried to upgrading ipad 1 from itunes and l guess it did not complete the process because all I have showing on the ipad is the itunes logo with the usb cable. When l try to connect it to my system, it resquest that a driver be used to install the device. Please help! How do I restore?

Restoration is relatively simplistic. Here's whatcha do. Plug your ipad in, open itunes, now if itunes doesn't recognize it then you may have a problem, anywho, click on the ipad in the devices interface and go to the info tab, click restore, and it'll be just like it was when it left the factory. To get you data back, it should ask if you would like to use a backup, just select the backup you want and you'll be good to go. That is if you regularly backed up your iPad.

I plugged my Ipad3 in order to update the software to version 6.1 but I got an error and my Ipad now is locked, it's showing the Itunes logo with usb cable on the screen. What should I do now?

I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?

You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

My mini ipad shows the itunes logo and picture of charger on screen

My mini ipad shows the itunes logo and picture of charger on screen

You are in Recovery Mode. Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad

HT201263 Please, help me gain access to my iphone 4s. It keeps showing the itunes logo with the USB cord charger display.

Good day, please help do a manual reset on my iphone 4s. I was updating my itunes and all a sudden i discover the USB cord disconnected while updating which later show me itunes logo with the USB cord charger display since yesterday. Help me gain access back to my iphone 4s so it can start working effectively . Thanks.

http://support.apple.com/kb/ht1808

My iPad is showing the itunes logo with a charging plug

I cannot get the itunes logo off the screen. It is fully charged.

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

HT4623 Did update now phone has iTunes logo with power cord and can't get past it

I have completed the new update to my iPhone and now can't get past the iTunes logo on my phone, all my music is on a computer that is now not working, how can I fix my phone to get past this??

I agree on the updates, I wish it wasn't automatic. I completely, totally agree.
Keep in mind, you can't complain about having CM7 messed up from webOS updates. CM7 is not supported on this hardware by HP. CM7 is all on you.
There was no webOS upgrade in your case. The upgrade was stopped midstream, possibly damaging the TouchPad.
I asked 'why did you do that', because I actually want to know why in the world anyone would ever stop a firmware upgrade. It's like teasing a crocodile with chicken meat and wondering why it bit your hand off. You seem to know your way around technology, so I can't understand why you'd stop a firmware upgrade. I'm sure you know how dangerous that is. I did, in fact, provide a constructive suggestion. But not a solution, because I don't know of one. I haven't run across anyone who stopped their TP's upgrade process midstream. I am sure it's happened before somewhere, I just don't know about it.

HT4623 my ipad just locked up on me and is showing the itunes logo with an arrow and cord showing on the screen

I have just tried updating my ipad air and it locked up on me showing an icon of itunes and a picture of a cord on the screen.

Something went wrong and you have to restore the software now. Connect your iPad to your computer and launch iTunes and try restoring it by selecting the iPad in the devices tab at the top in the upper right corner of the iTunes window or in the left sidebar and then click on Restore in the Summary window on the right.
If you can't restore that way, then you will have to use recovery mode.
iTunes: Restoring iOS software - Support - Apple
The last part of the support article will take you to a link that describes how to put your iPad into recovery mode, if you need it.

I used my wifi to update to ios 8 after like 4 hours it finished ans in the middle of installing the software it shutdown and everytime i try to open it it shows the itunes logo with the usp cable... any help pls

i used my wifi to download ios 8 after like 5 hours it finished and then it let me install, while installing the software it shutdown and everytime i try to open it it shows up the itunes and the usp cable logo... when i plug in the usp cable it says in itunes( ipad recovery mode) and when i press restore it start downloading the ios software again...... wats tht and what i can do pls help. thnx

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

HT200126 Tv device is turned off and won't work its on but it shows the iTunes logo with no movement

The apple tv is closed but wont show any thing expect a logo of Apple iTunes we know it wants a restart but the restart won't work

I would connect it by microUSB cable to a computer and use itunes on the computer to restore the firmware of the appletv if that did not work then if I would return it under warrenty if it's under warrenty

TS3694 I tried to perform an update on my iphone4s, it said it completed. It then went to the screen that shows the itunes logo with the usb cable pointing to it. I have tried every step the internet said to take in an attempt to get my iphone4s out of re

I can't get my iphone 4s out of recovery mode. I have tried many things including: connecting it to iTunes and going through the recovery steps, holding down the home button and the lock button until the apple icon appears. Neither of these has worked.

Place the device in DFU mode (google it) and restore.

HT201412 My iPad turns on but it shows an iTunes logo with a USB, why?

I recently updated my iOS and when it finished, it turned back on, only to show the iTunes logo with a USB. I connected it to my computer and restored it still doesn't work and continues to show the image

Try forcing it into recovery mode if you can't restore the conventional way.
You can read about it here.
http://support.apple.com/kb/ht4097
But this is how it goes ....
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?

I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?

Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
Restore iPad
If you can't restore this way, you will need recovery mode.
Unable to Restore

I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

My Ipad shows the Itunes logo with connecter cord and arrow but wont turn on. How do I fix?

Similar Messages

Maybe you are looking for