My iPad suddenly started to show crazy colors. I turned it off and had to use the two button trick to turn it back on. Now it shows only green stripes for a few seconds and goes back to sleep.

My iPad suddenly started to show crazy colors. I turned it off. It would not reboot until I used the two-button reboot. Now it shows only green stripes. only for a few seconds and goes back to sleep. HELP!

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete all apps from this list.
- Press the home button twice when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

Similar Messages

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac

I cannot sync my iphone 4 to my imac it connects for a few seconds then goes off

please can someone help me When i connect my iphone 4 to my imac using bluetooth it pairs up but only lasts for a few seconds then goes off and shows
not connected i have tried all sorts of ways but without success why is this happening am i the only one does anyone know the answer please

Seems like my problem - I have a new iPhone 4 and it does not want to pair with any device. It seems to connect, and is recognised by my MacBook pro, it shows the code that my Macbook shows, but then says it cannot connect. Neither did it connect to another imac, nor does it connect to my carphone. Have received a replacement (as I had bought the iPhone five days ago), have a new one now, but exactly the same problem. But I cannot alter the bluetooth settings on my iPhone, and restoring does nothing, nor leaving it in the completely unaltered setting, nor switching off all other wireless devices. Does anybody know how to solve this?
Arnold

HT1338 When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed and remains as if the computer is now Frozen. Mac book Pro leopard operating system. What can I do to get past the freeze?

When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed and remains as if the computer is now Frozen. Mac book Pro leopard operating system. What can I do to get past the freeze?

Could the disk have failed?
Can you hear it?
Boot from the install DVD and see what Disk Utility says.

TS1559 HELP!! I should automatically connect to wi-fi, it Wont! when i tell it to.... it only stays conected for a few seconds.

Hi my iphone suddenly doesn't want to connect automatically to wifi!
Even When I tell it to....
It only stays connect for a few seconds.
You return to wifi to find its turned off.
The process starts again & Again & Again.
With no success!
Works fine on cellular data. I'm trying to update files that require you to connect to wi-fi,
Because some Files are to big to update/upgrade using cellular dara?cellular!
Has anyone else had this problem & worked out how to fix it.
Please please please, help me!
Remaining employed depends on it!! Thanks

That is how your ipad is designed to work.
Maybe try resetting network settings. If all else fails you can do a back up and restore as new to be certain there is no issue with your software.

IPOD updater 2006-1-10, now no sound after video plays for a few seconds

I installed the latest IPod updater 2006-1-10 and now all my movies will hang for a few seconds and then the sound stops working. If I forward through a few frames, the sounds comes back and repeats the same behaviour.
Anyone have a fix or seen this before?

iPod Updater 2006-01-10 has caused a variety of problems on multiple iPod models.
I just spent an hour on the phone with tech support. They forwarded me to some higher level techs due to my extreme heat while recharging issue. They still seem unaware of the problem. I suggested they read the forums to see just how widespread the problem is. The tech I spoke with assured me she would pass the problem up through the ranks and check the forums, but she said they haven't had a lot of service calls on the issue.
SO!
I suggest that everyone post a "me too" message to the "Complete iPod Failure" thread from 1-23-1006 ( http://discussions.apple.com/thread.jspa?threadID=330396&tstart=0 ), with a description of the problems they are experiencing and what model iPod they own. That thread is an effort at consolidating discussion of this specific issue, as well as a collection of the myriad possible fixes available.
Then phone Apple's tech support (1.800.275.2273) and let them know you've had a problem with the iPod Updater 2006-01-10.
Choose menu selection #1, Technical Support, and talk the automated responder through your configuration.
Hopefully we can at least bring the issue to their full attention and get them to pull the updater from the downloads so it doesn't ruin anyone else's day!
Good luck!

My Ipod touch is in recovery mode but when I go to restore it in itunes it only stays connected for a few seconds then ejects itself. How do I keep my ipod on long enough to restore it?

My Ipod touch is in recovery mode but when I go into Itunes to restore it, it will only stay connected for a few seconds then ejects itself from itunes. How do I keep my Ipod connected long enough to go through the restore process?

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.

HT2486 the photos that I add to address book will only be there for a few seconds after I close the edit button. Either they go away completely or they a very small portion of the actual photo

the photos that I add to address book will only be there for a few seconds after I close the edit button. Either they go away completely or they are very small portion of the actual photo

Frank, thanks for your note. I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it. Too much to ask?
And yes, I upgraded the Aperture 2 Library first. [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.] That step took a number of minutes, but seemed to work fine (no error messages of any kind).
Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so. As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely. You did see the blurry example I included, didn't you? That is what each and every photo looks like.
Text-box content appears to have been rendered pertectly, for the record (including captions).
So, ... is this result something you have heard of before? Do you know of a one-step solution? Or am I looking at an extended picture-by-picture fix?

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Iphone 4 says "connecting..." for a few seconds then goes straight to "Connection lost"

Just yesterday it was working fine, but this morning facetime has been not connecting.
It connects for a few seconds, and then it goes straight to Connection Lost.
i have tried calling the person a bunch of times and it does the same thing. They have done the same, and apparently their iphone is doing the same thing, too.
Is there something wrong inside my phone? I/m sure its my phone because my connection is full and working for every other app. is there any other method i can do? i have tried resetting my phone, wifi, and my facetime. Please help!
Thank you.

Hi shmirf,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
Cheers,
- Judy

ITouch shows up on iTunes for a few seconds, then disappears. (Wireless Sync)

When I try syncing my iTouch with iTunes with wireless, the iPod only shows up for a few seconds, than disappears.
Does anyone else have a similar problem, or any solutions?

I would go easy on the abbreviations, though. Try the suggestions here:
* https://support.mozilla.org/en-US/kb/Firefox%20crashes

My imessage wont work, when i open it the screen turns white for a few seconds then goes back to the home screen

WHEN I OPEN IMESSAGE THE SCREEN BLANKS WHITE AND AFTER A FEW SECONDS CLOSES IMESSAGE AND GOES BACK TO HOME SCREEN!!! HELP ME I HAVE NO IDEA WHAT TO DO!!!!

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Messages>Send and Receive and sing out and sing back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Can't listen to any music on my iPhone 5, when I press play it just skips to the next song, does that for a few seconds, then goes back to artist/album/song list. HELP!!

I just updated my iTunes on my laptop to the newest version. I connected my iPhone five to the laptop, and it asked me something about a restore. I wasn't thinking, confused "restore" with "sync" and I just hit yes.... I know, dumb. Anyways, I logged into iTunes on my laptop, downloaded all my purchased songs through the cloud, did a backup, then disconnected it. When I used my phone again, everything was different. All my backgrounds had changed, my apps were rearranged, I had old apps on my phone that I had previously deleted, etc., all signs pointing to me restoring my phone to a previous version.. None of that bothered me, I knew how to deal with it and just changed everything back to the way I had it before the restore, and everything was fine.
Until I went to listen to some music on my iPod. I made my album choice, selected a song, and instead if it playing, it was silence. I looked at my phone and it was skipping through the songs without ever playing a single sound. That bar that shows how far through the song you are? It never moved from zero, but my songs were skipping and skipping and skipping, almost like I was hitting the "skip track" button, only faster.
Should I re-restore my phone? Would that possibly fix it? I've checked, and my iOS and my iTunes and iPod version are all up to date.
PLEASE HELP ME!! I can't find this topic anywhere in support, and I NEEEEEED my music.

Hello avenmaven,
Thank you for all the information you provided, and congratulations on your new laptop!
I do not think this has to do with setting up iCloud on your new computer. You might not have the option to manually manage music checked on your devices. This box would need to be checked if you are dragging content over to your iPhone or trying to delete by pressing the delete key:
You can find more information at the full article:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
I hope this gets you back on track! Thank you for using Apple Support Communities.
Best,
Sheila M.

Screen flickers for a few seconds then goes blank

I have been reading these threads trying to find someone having my problem, but the popular issue seems to be with lines on the screen. Mine just goes completely blank a few seconds after start up. Any words of wisdom?

Unfortunately, the internal power supply within the AirPort Express has likely failed.
As a last resort, try a Factory Default Reset as follows:
Power off the AirPort Expess for a few minutes
Hold in the reset button, and keep holding for an additional 9-10 seconds while you simultaneously plug the Express back into power
Release the reset button and allow a full minute for the Express to restart
At this point, if the Express is operational, it will display a slow, blinking amber light.
If it doesn't....then it is time to replace the AirPort Express.

BluRay video plays for a few seconds then goes black...audio plays fine

I have several videos that are to play from a main menu, then return to the menu. On all of them, only a few seconds (ranging from 4 to 9 seconds) plays, then the screen goes black while the audio continues. This is happening with all videos. The menu structure is working fine, when I go to the end of each video the menu returns. I'm on a MAC, and all quicktime movies play fine in quicktime player. What am I doing wrong?
Thanks
Steve

I'm in the Windoze world, and don't do BluRay, so I have no idea if the Avid codec is your problem
I guess all I can suggest at this point is to Google for something like
Encore CS5 Avid Codec
and see if anything jumps out

My iPad suddenly started to show crazy colors. I turned it off and had to use the two button trick to turn it back on. Now it shows only green stripes for a few seconds and goes back to sleep.

Similar Messages

Maybe you are looking for