My ipad used to print to my HP B210 eprinter, now it won't. What's wrong? iPad 1
my ipad used to print to my HP B210 eprinter, now it won't. What's wrong? (iPad 1) Everything is hooked up correctly, am online, and can print fine from my wireless HP laptop. The iPad finds the printer, but after trying to contact it, it says the printer is offline (which is isn't)
This question was solved.
View Solution.
cgtoni,
You have been very thorough, try these steps in sequence:
Unplug the power cord from the printer.
Unplug the power cord from the router.
Turn Bluetooth off on the iPad.
Plug the router in and allow to power up fully.
Plug the printer in and allow to power up fully.
Try to print from the iPad.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.
Similar Messages
-
My ipad 2's battery percentage is stuck at 95%!!! Eventhough I charge 5 hours, it is still 95%...After that, I unplugged the charger, I use my ipad for 3 hours, it is still 95%!!!!! What's wrong is it?! HELP ME
You probably need to recalibrate the battery. See link below.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
My ipohne and ipad use the same account. My wife wants to setup her own account for the ipad and utilize family sharing. How can I change the account in my ipad?
Hi,
Are you talking about changing the Apple ID used for purchases in iTunes? If so go to 'Settings->iTunes & App Store-> then 'tap' on the Apple ID that appears and click Sign Out on menu that appears. You can now login with a different Apple ID.
Regards,
Steve -
My ipad and iphone 4 both freeze my laptop when i connect them. What is wrong. I have installed Windows 7 on Samsung Q310
You can try this:
1) restart your computer
2) once restarted, do not run anything else, except for launching iTunes manually
3) connect your devices to your computer
If the problem persists, more troubleshooting is required, see below:
Are you using the latest iTunes software? Under Help, select Check for Updates
You can also look for inspiration in this document:
http://support.apple.com/kb/TS1538 -
I entered my debit card for a app latter when I went to update all it asked password as usual then said sign in required took me to page sayin my card has been declined use alternate I don't have alternate but now it won't let me download free apps niether
Do you have enough funds in your bank account?
otherwise iTunes sometimes black lists card if there are too many fradulent purchases
Reason why they might black list a card is possibly you call in for alot of fradulent purchases
One more reason can be because iTunes does actually limit the amount you can change payment methods
Call AppleCare Phone support and have your call directed to iTunes Store
1-800-275-2273 -
Ever since I got the new update 5.1 my iPod's been dying faster, even after I charge it. It used to last for at least 3 hours, now it won't even last one hour and dies for no reason (even when it's in sleep mode, and not in use) What's wrong with it? Is it the update? It's lagging as well..
Some Users have Reported that a Restore as New has helped Resolve issues...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137 -
when i use the apple store, Your request is temporarily unable to be processed. what is wrong with it? can someone help me?
Try turning off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall
Disable anti virus software if you have that installed before downloading media from the App Store.
When you post for help, please tell us which Mac OS X you have installed. Thanks ! -
My ipod tell me that has 65 mb memory but when I'm about to sync music it's like there's no memory and don't use that 65mb so I had to delete music... What's wrong?
65mb is very little space.
It is likely that you were trying to sync more than would fit on the iPod. -
my iphone 4s cannot connect the internet sometimes using the 3G, but sometimes it does work. i do not know what is wrong ?
5.0.2 has not been released, thus you can not upgrade.
Stedman -
Printing from macbook pro and iPad using same printer
Have a macbook pro and an ipad. Can print from either using my epson XP-310 but not from both without resetting settings for whichever device I wasn't printing from . Is there a way to set up my Epson 310 wifi so it can see both devices and let either ipad or macbook pro print vs having to switch settings back an forth?
Welcome to the Apple Discussions!
In the Finder go to Help>Mac Help. Select the Index, upper right. Go to S>Sharing printers. You will find instructions for configuring Macs and PCs for printer sharing among the articles available.
Dah•veed -
How IPAD use the Printer which connected with the Time Capsule
I connnected a printer to time capsule. And I can use the printer in Windows. But I can't use it on IPAD and IPHONE.
So are there any solutions?iOS devices can only print directly to AirPrint printers. Wireless printers or printers connected to a Time Capsule are not necessarily AirPrint capable.
To print directly from an iPad / iPhone you will need an AirPrint compatible printer or another device to act as a print server. That can be a Mac computer running Printopia ($19.95 with free trial) or handyPrint (donation - supported). The Mac must be "on" but may be asleep for them to work. Equivalent PC options exist but you're on your own finding them.
You can also buy this standalone print server:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html
The xPrintServer Home Edition will support a directly connected USB printer. The Network Edition will support any network printer.
These options enable you to use any printer available to your Mac, even older ones that may predate AirPrint by decades.
Otherwise you will need to buy an AirPrint printer or multifunction device. -
How do I transfer PDF files from PC (Windows 7) to IPAD using Itunes 12.1.2. I would like to do files manually rather then auto synch. Previous versions let me drag file in Itunes to Ipad and files appeared under Ibook and then I could move them to an appropriate collection title. The interface appears to have changed in the latest ITunes version and I am not sure what the proper procedure is.
King_Penguin - Thanks it worked perfectly. I had my pdf files copied into ITunes on my PC but when I clicked on a pdf file to copy it I thought the sidebar would appear with my IPAD name and then I would drag it over. I didn't realize that I needed to click-and start dragging it towards the left-hand side for the sidebar to appear. It worked like a charm - THANKYOU!!!
-
When I use my iPad for an hour or more it gets really warm to the touch, what is wrong?
WWhen I use my iPad for an hour or more it gets really warm to the touch, what is causing this?
you using it.
WHen batteries drain they generate heat, as does your screen and processor.
Warm is normal. if it ever gets too hot to handle - literally - then stop using it and book an appiontment at your local apple store. But really, generating heat is no different from your computer getting warm as it's used. -
Just updated Instagram but now it won't open on my iPad
Just updated Instagram but now it won't open on my iPad
First a reset, press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own. If it still doesn't open delete and reinstall app.
-
Hi all,
My recently installed (Windows 8.1) Acrobat Pro (part of CS6) suddenly stopped working - now it won't start.
This happened on Windows 7 in 2012 and was eventually fixed.
Any advice on what I should do? [I can't find where to post a question to the adobe help people]
- DuncanWell, the computer stopped starting up at all. It could never find the operating system. I tried safe mode and virtually every other non-standard start-up option. I then did target disk mode with another MBP and got the message: "The disk you inserted was not readable by this computer." I then tried using disk utility and it couldn't retrieve retrieve the data using restore (writing to an external drive). I suspect that this means the hard drive would need to be replaced. In your expert opinions, is this necessarily true? Could this still be just a software problem, or perhaps some other piece of hardware?
Part of the reason I ask is that this laptop is now nearly five years old. It's needed a new battery for two years. If it's a virtual certainty that the hard drive is toast, I don't want to pay $150 for someone to take it out and try to recover any remaining data from it, only to reveal that the data is indeed irretrievable (since the computer itself is probably only worth $300-400 at this point). The nearest Genius Bar is also more than 2 hours away. Am I going about this the right way by using disk utility, given that the hard drive won't mount to the desktop of the other computer? If the hard drive can't be reat in target disk mode, does that confirm that it is the hard drive?
Thanks
Oh also, it does still make the startup noise, even though I can't run the AHT since I can't get it to start up in safemode. I thought this mean that it passing various hardware tests. Does this not apply to the hard drive?
Message was edited by: Euain_ *add-on*
Maybe you are looking for
-
Dynamic images in crystal reports for VS 2008
The company logo scenario. The solution I'm trying unsuccessfully to implement entails: - the logo is not stored in the database, but resides locally on disk - strongly typed dataset generated by stored proc in sql server 2008 - column defined in a d
-
Error in generating Outbound Xml in SNC
Hi All: We are working on SNC 7.0 vrsion along with Pi 7.0 and ECC 6.0. When SNC gets a PO from ECC and supplier confirms it then we are not able to see any outbound xml file generation in SNC . Due to this nothing is coming out from SNC. Folowing ar
-
List of G/L accounts and its descriptions used in account determination
Dear Experts, I would like to see the descriptions of all the G/L accounts which is there in account determination. Where can i find that? I have checked in FS00, in that we can see one by one, i would like to see all the G/L accounts at the same tim
-
Oracle database normalisation and logical design documnetation
Hi , Am a begginer on DB design , can anyone help me find Oracle database normalisation and logical design documnetation for reference. Thanks, Swaroop
-
Test Stand: How does parameter's value is passed as command line argument?
Hi All, This is my 1st Q on this board. I'm using Test Stand Sequence to call a subsequence where I call an executable file and passing few arguments to it. SuperSequence.seq => SubSequence.seq In SuperSequence.seq I have 3 parameters and their value