My Ipad will not receive signal from new home Xfinity modem.  I reset Pad but still doesnt work.

My Ipad will not receive signal from new home Xfinity modem.  I reset Pad but still doen't get WIFI

Does it not show the presence of a wifi signal, or just not connect?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

    I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

    banannaphone,
    Welcome to Apple Discussions.
    Quit Safari, find the com.apple.Safari.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and let us know what happens.
    ;~)

  • After I did a reset my gps app will not receive signals from my remote G PS device. I have an iPad 2 wi-if only. The remote GPS device is pared and has a strong signal. I reinstalled my gps app, no luck.

    After I did a reset my gps apps will not receive a signal from my remote GPS receiver. The GPS app wa working fine before. I reloaded the app but no luck. My remote GPS receiver is paired to my iPad and has a strong signal.

    Hi there.
    Thank you very much for your quick reply, it's really appreciated.
    No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
    I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
    While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
    I guess I need to fire up my PC and download it / sync my iPad.
    Thanks again for your help

  • My iphonte will not activate and i have plugged it into the computer and it still doesnt work

    someone help?

    Im pretty sure that its because there are millions of people doing this at the same time
    Just give it some time and then try later.

  • My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account and reseting it and it still only picks up the old messages? Anyone else having tis problem? ANy ideas how to fix it?

    My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account (a number of times..)  and setting the account back up?  and it still only picks up the old messages? Anyone else having tis problem? Any ideas how to fix it?
    This just started happening for no reason...no changes to the phone or Ipad?

    my iphone and ipad will not send or receive emails or messages for the last few days.  it is telling me that cannot connect to server

  • My early iPad will not allow for a newer version of software than 5.1.1.

    My early iPad will not allow for a newer version of software than 5.1.1 is there a way of loading on a newer version?

    Hi,
    If you have an original iPad, that is limited to iOS 5.1.1 and cannot go any further. All other iPads and iPad Minis can get up to iOS 7.0.4.
    Hope this helps!

  • My iphone 4 does not receive signals from my carrier

    my iphone 4 does not receive signals from carrier

    Tap Settings App>General>Reset>Reset Network Settings. If this not help may be Carrier problem, contact them. If still problem could be faulty iPhone.

  • My wife's iphone will not turn on. I have tried the normal resetting procedures but nothing. Any ideas would be much appreciated..

    My wife's iphone will not turn on. I have tried the normal resetting procedures but nothing. Any ideas would be much appreciated..

    iPhone User Guide
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

  • IPad will not receive mail with my new email address

    I changed my email address and provider 4 days ago and now my iPad 2 will not receive mail.

    Hi bethfost,
    This article provides basic troubleshooting step that can help you resolve the issue receiving emails on your iPad after switching to the new email service provider.
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    So long,
    -Jason

  • New monitor can not detect signal from new referb pc

     Monitor is a new flat screen,  model 2310m full HD with  vga, hdmi, and dvi-d connectors and boot up CD which includes pdf manual and video drivers etc..
             PC is a referb Pavilion M9200t first time started since referb with a G-Force GT graphics card (1 gigabite) and dual DVI-D connections. No VGA or HDMI out. OS is vista ultimate that I will probably update to windows 7 if I ever get it set up. Monitor does not get a signal from new PC with DVI-D cable or a VGA cable with an adapter. Monitor works fine with my old XP PC after installing drivers  and using the vga cable. New PC has no VGA out, so I bought a VGA to DVI-D adapter thinking that it would have proper drivers for a VGA monitor with no success. I also tried new PC on my old monitor with the DVI-D adapter on the VGA cable and that didn't work either. I can't do a first run setup without a monitor and the monitor won't work without a signal.
            I bought the PC from a friend who decieded to buy a laptop instead and had never started it. He bought it from someone who was selling referbs on E-bay and messed up and accidently started the warranty period  or so they say. 
            Also when I plug the PC in the fan starts and continues running till I do a hard shutdown, that is holding start button down till the PC shuts off. If I unplug and replug the computer it starts again without pushing start button. Does anyone think it is the graphics card issue or maybe power supply, or just not booting at all?  Any ideas would be greatly appreciated.------Thanks in advance.----Larry

                Ok, thats the procedure I was talking about earlier. I did that bios default factory reset just now. First the version 6 and earlier. It didn't work so I tried version 7 and later and that didn't work. I then tried version 6 and earlier again only this time pushed F10 more rapidly and got right in right when I got to the F5 and enter portion. Then I pushed F10 again to save the change and enter again to close. The PC didn't boot up the next screen like the test said it would. So I did it all again and spent some time reading what was on the bios pages but  accidently pushed ESC as the bios menu suggested instead of enter to close out   . No boot up screen again. I did another hard shutdown and then unplugged the cord for 5 minutes and this time the PC stayed off when I plugged it back in. The bios are set to default but I cannot get it to start again in safe mode or boot up. So if the power supply is working properly, and the monitor worked in safe mode, then the video card must be good. right?
              So I'm editing from the night before, its Monday morning here in Wi. and I'm sorry to say that after leaving the PC unplugged all night that when I plugged it back in this morning, the dumb thing started again without pushing the  start button.  So the only thing doing a recovery on the bios accomplished was to prove that my the video card can run the monitor in safe mode which is a good thing I guess. Hope someone has an idea as to what else I can try.-------thanks

  • Hp laserjet 1300 not receive signals from computer

    HP Laserjet 1300 seems not to receive signals from my computer. Please explain
    This question was solved.
    View Solution.

    Are you networked or USB cabled into from the printer into the computer?
    What OS are you using?
    If you are on windows 7 and networked in, then you need to check and make sure the that the IP address of the printer is listed as the same in the port settings.
    If you are on windows 7 and are using a USB cable, then you have to load the printer through the IN-OS driver. See the link below...
    Install the driver included in the Windows 7 operating system (OS)
    If you are using some other OS or driver, please let me know.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Ipad will not open photos from sd card

    ipad wll not open  photos from an sd card

    Are the photos on the card taken with a camera? If not, the card must meet all of these requirements...
    The SD card must be formatted using MS-DOS (FAT). 
    Photos must be in a /DCIM folder folder at the thumb drive's root level
    Photos must all have 8 character names plus the suffix, usually jpg or jpeg.

  • My iPad will not send emails, even though all the settings seem correct.  But it receives them OK.

    My iPad will not send emails, even though all the settings seem correct.

    Patricia,
    When you say seem correct, have you checked in Settings > Mail, Contacts, Calendars > Account name > Outgoing Mail Server, SMTP and the outgoing server name is correct, then > Primary Server name is correct >  Host Name, User Name, redo the Password, Use SSL is OFF or ON according to your provider, may just try it both ways, Server Port, often 25 is the best to use.

  • My ipad will not connect to a new bluetooth device

    My iipad will not connect to a new blue tooth device (speaker)

    make sure the speaker is not connected to another device
    and if not test that it can connect to other devices if it can't it's likely defect

  • My phone went blank and now will only show the apple logo I have tried to reset it and that doesnt work HELP!!!!

    My iPhone is frozen. It was working find about a hour ago and then for no reason the screen went to the apple logo. I have tried to reset it and that doesnt work. When I press the power/lock button and the center key it turns off but then it comes right back to the apple logo screen and wont go any further. Please help I dont have my stuff saved and would like to keep the stuff i do have on it!!! Every once in awhile the screen will go black for a few seconds then the apple logo pops right back up! I dont know what to do.....

    Try to set it up as new device, explained here:
    How to back up your data and set up as a new device
    First without using the backup, in case it contains corrupt data.
    If it works after that, use the backup to restore from.

Maybe you are looking for