My iPad will not turn on. I have tried to reset, with no results. I have also tried to restore from iTunes, but it could not recognize the iPad.
My third gen iPad will not turn on.
I tried to reset, and the apple icon appears, but it will not load.
I attempted to restore it through iTunes, but it could not recognize it.
Any suggestions would be appreciated. Of course, it is out of warranty.
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Similar Messages
-
Ok I need help. I went to use my phone, put in my passcode, emergency dial came up, then the phone said I didn't have an imei #. I hit the back button and then I was told I needed to restore and update using iTunes. I tried several times to do this and my phone is still not working. It acts like it's updating, but once the bar reaches the other side of my phone, iTunes tells me there was an error. I used all the ports on my pc, changed cables, restarted my pc, and still nothing. Can anyone please help me. This phone is my life and I can't afford to get another one.
Sounds like you might need to take it to an Apple Store but if it is an iPhone 3G it would no longer be under warranty.
Looking at the Apple Store online you can get an iPhone 3GS from $49 on AT&T if it comes to having to get a new one. Your other option is second hand. -
I have changed my Apple ID when I got a new email address and confirmed it. However when I go to my iPad to buy an app my old Apple ID comes up and will not recognize the password. I tried going into the settings on my iPad and tapping on the old Apple ID to go in to change it but it will not recognize it and I cannot get in on the iPad to change it. How do I change this ID on my iPad for the iTunes store?
JaylsworthHow did you fix this??
-
I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?
Do you remeber the exact (or close to it) wording of the error message?
Try manually placing the iPod in Recovery mode and then try to restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have an iPod or computer problem. -
Following updating my ipad2 to OS7 it asked for a passcode which I entered, when I turned the ipad off it requested the passcode but does not recognise the one I (thought) entered , the ipad is disabled. I tried to restore in itunes but wanted me to turn find my ipad off, as I can't get into the ipad i can't do this. Any suggestions as to how I can fix this?
For any of you with a similar problem, apple was able to help, you need to keep the round quite button press in while you connect your cable (which is it self connected to pc itunes) the ipad will then restore. hope this helps
-
I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any thoughts.
I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
-
Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?
Place the device in DFU mode (google it) and restore as new.
-
I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?
Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives? -
I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474 -
I have a sony rx100 and my version of lightroom (4) will not recognize the raw (.ARW) files. Please help!
I have version 4.4.1 on my computer now, which is functioning properly - but does not read the .ARW files. When I download the link you sent and try to open it, it pops up as version 5 and I get this image (attached). This is my first time in one of these threads, not sure if i have to reply to each of you individually?
DdeGannes, could you please tell me how to recover the serial number from my operating system?
Thank you SO much everyone! -
I have a Canon 70 D. Lightroom will not recognize the raw CR2 file. Don;t know if I need an additional plug in to the tether plug in for canon, or how to get one. Can anyone help?
See Camera Raw plug-in | Supported cameras
You need Lightroom 5.2 or later. Which version of Lightroom are you running? -
I have changed to AT&T U-verse, which has a new modem and router combined. Safari 5.1.10 will not recognize the wifi signal, but Foxfire will. What settings do I need to change on Safari?
Hello SalsburgD
The first thing I would check is to make sure that the router is using the recommended settings to get online. Another troubleshooting step is to create a new Network Location and then join your network to see if that changes things.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/kb/ht5289
Regards,
-Norm G. -
I have quicken 2000 for mac on an old mac and wish to upgrade to a new laptop running snow leopard. Quicken 2006 on my new laptop runs, but will not recognize the old data qif files. What version of quicken for mac will recognize files from 2000? Or, is there a special procedure I should be following?
can't open Quicken 2000 files in classic mode on new MacBook Pro version 10.6.7
-
How do I either: 1) turn off comptability feature, or 2) up grade the .exe to be compatable with the iphone ios 6.0.1 software. The computer will not recognize the phone. I reinstalled itunes, but it still does not work.
What are you talking about? There is no "compatibility feature" on the iPhone, and .exe files won't run on the phone.
Please slow down and explain exactly what you're trying to do and what happens when you try. -
Anyone any ideas, I have just purchased 3 tunes from itunes, but they will not sync with my ipod.
https://discussions.apple.com/message/23071575#23071575
Maybe you are looking for
-
Could someone give me some advice on the memory on nokia 6234 as my phone does not have much memory on ot even though i have saved everything to the memory card which is less than half full???
-
Questions on use of freeze mode in Logic Pro
Hi, I've noticed that the soft synth plug-ins are eating some of the CPU processing power. The bar is about a third of the way. I have frozen a few tracks but there are a few that don't seem to have the freeze icon in sight. I configured the track he
-
Printing from ActiveX Control in crystal report 10 in IE7 not working
Hi, I am using ActiveX Control for printing in Crystal Report version 10 using Java. When I click on print button, ActiveX control dialog box opens and then click print button, the dialog box shows it's printing and does not stop and there is no prin
-
Import in progress (97%)... Please wait
Hi all I created a portal Transport { epa file } from my development system and imported the same successfully into my IT system I again tried to import the same EPA file into my QA system where , the import wasn't successful nor fail. Once I click
-
JCO connection for the metadata - account permissions????
Hello All, This is our first try at adaptive RFC and I'm trying to instruct our security people to set up a user account for jco metadata and have forwarded lots of excerpts from docs like ESS setup, etc., and generally that this user needs access to