My iPad won't recognise my air printer, it is connected as I checked by typing in IP address into Safari, but when I try to print it just says cannot find any air printers.
my Ipad won't recognise my printer. It is connected as I have typed the IP address into Safari which confirms connectivity. Spoken with canon who suggest it it is a problem with IOS not recognising the functionality. When I try to print it says cannot find any air printers. Printer is working via LAN set up on my laptop. Don't want to have to spend £25 to speak to an apple support team. Has anyone else experienced this problem. Printer is a canon MG 3250.
A few things you could try:
Reboot your modem/router.
Turn your printer off then on again & make sure it's connected to the network.
Reboot your iPad holding down the home & sleep/wake buttons simultaneously until the apple logo appears then release & let the iPad boot up normally.
Try going into Settings on your iPad & select General->Reset->Reset Network Settings.
Also, have a look at this:
http://www.canon.ca/support_images/KB_Images/Shared_wifi_documents/How_to_Print_ Using_Apple_AirPrint_NEW.pdf
Similar Messages
-
I have typed in email addresses into Contacts, but when I try to do an email, most of them have an exclamation mark and won't let me send! Where am I going wrong ? It is really sapping my confidence!
Did you set up your email account info in Settings?
Settings > Mail, Contacts, Calendar > Accounts > your account should be listed in there with the appropriate incoming and outgoing mail servers and correct user names and passwords. -
My iPad will not allow me to update apps although I have no problem buying new ones. It says "cannot connect to iTunes" each time I try.
Same problem for me, too. It happens on my iPad, iPhone, and iMac. Weird because I have great Internet connectivity and I can log into and view my iTunes account. I've downloaded three new apps with no problem. But my iPad shows 14 apps needing updates, my iPhone shows 2, and my iMac shows 1. In all cases, clicking on "update" and entering the password results in the message, "Cannot connect to iTunes Store". It's the same result across multiple WiFi networks, even after resetting them.
I'll see if someone at the Genius Bar can help and then I will repost. -
I'm setting up my MacBook Air and it tells me to sign in with my apple ID so that I can set up features like iTunes and iCloud and such but when I try to sign in it says there's a server error. What do I do? Do I try to skip the step? How can I fix this?
The following previous discussion may help, in particular the last post (1/22/2014 by frankjet7): https://discussions.apple.com/message/21295536#21295536
-
I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!
Hey socestlavie,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M. -
My wife gave me her older ipad. I have reset and removed all data. My Apple ID (Ipod touch) is not an email adress, but when I try to stu up the ipad it asks for my Apple ID, then tells me that for security reasons the Apple ID must be in email format?
Change it to an email address.
-> https://appleid.apple.com/ -
I am trying to update my iPad 1 to the 5.1 version so I hooked it up ajd I click update and it just says cannot find a server please check your network settings or try again later what should I do
See
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update.
Cheers, Tom -
help ,me
Did you try anything suggested in the last thread you posted?
Views
Replies
Last Post
I uninstalled itunes for windows 7 and tried to install itunes 10.5 and it won't work. I deleted all existing apple programs from my computer but when I try to install again it says so long error involved with microsoft?I uninstalled itunes for windows 7 -
I am trying to set up my daughter's iTouch. I am connected to our Wi-Fi, and have confirmed this in Settings, but when we try and open any webpage we receive the message that page cannot be opened because not connected to the Internet. I have already re-set the iPod, have shut-down and restarted, and told the iPod to "Forget Network". please help - i am going bananas!
Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
* A PowerPC G3, G4, or G5 processor
* Built-in FireWire
* At least 256 MB of RAM (I recommend 1GB minimum)
* DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
* At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/ -
when i connect my ipad 2 to my computer it shows up in the devices list but when i click on it it just says ipad on the screen
If you have a photo program on your computer that can handle image downloading then you might be able to use that : http://support.apple.com/kb/HT4083
-
I changed my Apple ID (new email address, same account), via the Apple website on my laptop, but when I try log into ITunes on my iPad, it still has the old ID. It is greyed out, so I can't change it. On researching further, it seems I have to sign out of iTunes and sign back in using new address. Ok so far, but when I do this, it asks if I want to delete the account and any data on the cloud. If I do this, and sign in with changed ID, will all the data be there Or will it be lost? Thanks for any advice.
Sounds like apps purchased from those accounts got synced to the iPod and it is asking to log into that account to update them.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.
What do yo see if yo go to the Updates Section of the App Store app? -
I recently got an IPad 2 and when I first set up the wifi connection the safari and facebook worked but suddenly whenever I attempt to get onto facebook it says Unable to connect and whenever I go on safari it says I am not connected to the internet. yet when I go on settings-- Wi-fi The network I should be cnnected with is ticked and it says I have connection, but once i try to go on the internet I have the same problem. Is there a way I can solve this by resetting or do I need to go into the apple shop to get it sorted. Any help? Thanks.
I recently got an IPad 2 and when I first set up the wifi connection the safari and facebook worked but suddenly whenever I attempt to get onto facebook it says Unable to connect and whenever I go on safari it says I am not connected to the internet. yet when I go on settings-- Wi-fi The network I should be cnnected with is ticked and it says I have connection, but once i try to go on the internet I have the same problem. Is there a way I can solve this by resetting or do I need to go into the apple shop to get it sorted. Any help? Thanks.
-
Hi - in the app store, I've logged in with no problem, but when I go into my existing purchases and have INSTALL next to everything I've bought, and try to click on them it says;
"There was an error in the App Store. Please try again later. (100)".
I've tried restarting, clearing all caches, buying and downloading new apps (which works), and also buying and downloading more music from iTunes too (so I update all T&C's etc too, and update all payment info). But nothing seems to solve this. Any ideas?? Thanks a lot, GregThis procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen L*/Coo* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there. -
My printer gave me my email adddress, but when i try to sign in it says invalid email address
invalid email address when i try to sign in
Are you trying to use the email address on the print out? That is your ePrint printer code. When you go to http://www.eprintcenter.com you will want to create an account and after you create your account, it will ask for the printer code to customize your ePrint email address.
If you are trying to create an account and it is saying invalid email or email already in use, it means that you have a snapfish account. In that situation, you will want to go to http://www.snapfish.com/ and click the login button in the top right hand corner of the page. When it prompts you to enter your email address and password, click the "Forgot your password?" link and enter your email address. They will send you a email with a temporary password and a link to change the password. After you change the password, go back to http://www.eprintcenter.com/ and log in with your email address and the password you just created.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
I have tried the solutions of showing toolbar (which is not an option under view) and then going into customize toolbar where I try and drag the default tool bar with "address and search" and everythig comes up but "address and search." Any suggestions?
Thanks!Try SHIFT+COMMAND+| (the bar or pipe key under the delete key)
or try zoom out (COMMAND -)
Maybe you are looking for
-
Switching documents in JEditorPane
I have a program that creates an array of files and reads them one at a time to make an HTML document to display its contents. The problem I'm having is that I cannot change the contents of the document, I want the user to be able to sift through the
-
Type Kit font not loading in Adobe Muse 2014
HELP!!!!! Type Kit font Source Sans Pro will not load in Muse the app. Which means no WYSIWYG for me. Other type kit fonts are working. When I select them Muse displays them correctly, and when a switch back to Source Sans Pro it doesn't display corr
-
How do I stop pop-up blocker on the new Safari?
It used to be easy----it was located under "Safari" and you just selected or un-selected it. But now that option is gone---I can't locate where to turn pop-up blocking on and off. Anybody know? Thanks!
-
Virus 'flagged' file in Windows 7 Bios Update...HELP !!
I just finished updating some Windows 7 Bios files....one of the files: C:\PROGRAM FILES\LENOVO\SYSTEM UPDATE\UNCSERVER.EXE" was flagged as Malware by my AVG Virus program and I put it in the Virus Vault. Then the installation of that update showed i
-
Export/import to/from database
hi, i do not know what is this for. i read the help but still no idea. i know to use export/import to/from memory id and also set/get but not export/import to/from database. 1) what help says it stores data cluster? what is data cluster 2) can have e