My Ipad wont retrieve my new emails and if I try to check passwords in Settings, the settings window only stays open open for a second or two and the automatically closes. Any help on how to fix. I tried the turn off and on trick and that didn'
My Ipad wont retrieve my new emails and if I try to check passwords in Settings, the settings window only stays open open for a second or two and the automatically closes. Any help on how to fix. I tried the turn off and on trick and that didn't work either. Thanks for any help.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Similar Messages
-
MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that.
Any help on how to fix this? How do I know if it is the airport card or not?
is there anything else I can try first?
thanksIf the technician at the shop is competent, he has given you a diagnosis that should have identified the problem. You could run the Apple Hardware Test to verify the findings:
https://support.apple.com/en-us/HT201257
Note the Apple Hardware Test is not definitive.
Go to the iFixit.com and Powerbookmedic.com web sites. They have parts and installation instructions. To install an Airport card is fairly easy.
Ciao. -
i'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it? the files files in iTunes show up as Apple Lossless but i can't put them on my iPod
"I have been able to convert to AAC by first converting to AIFF and then to AAC. This is a pan though."
this worked for me.
thanks. -
I used Inkscape on Linux before moved to Mac. Now I am trying to install it
using MacPorts, but libpixman has some problems that has been reported out there.
Does any one know how to fix it without the need to use other way than MacPorts?Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao. -
Why can't I message on my Mac. I open up my messages and it stays up there for a second or two. Then it will close out by itself. Help!
For some reason, the error box photo didn't appear in my post. Here it is:
-
I am from the Philippines btw. What I meant is, I cannot text someone ordinarily when the net is turned on, and it assumes to be texting through iMessage. How will I text someone without turning off the internet in an ordinary way, not in iMessage? Thank you.
I Tried that already, but if i turned it off, I cannot send an imessage to people I want to text through imessage. There are people in my contacts that when I text, it is automatically as text message, while there are some that when I text, it is through iMessage automatically, and I just want through text message also. And for the latter, I still need to turn off the wifi in my phone for them to be texted through iMessage, which is more hassle.
-
My playlist on My iPad 2 has blacked out, the music is all there and i can listen to it but i have no playlist breakdown of songs and i can only go back and forward with the arrows to listen to music. Any help would be appreciated, thank you.
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.
There's more to try but let's go a bit at a time. -
Why don't my tabs save anymore when i close Firefox. I'm not asked to save and i want to! i've tried looking in the help database and it does suggest settings may be wrong but does not offer any suggestions to fix.
You can use "Firefox > History > Restore Previous Session" to get the previous session.
There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.
Another possibility is to use:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
You can set the warn prefs on the <b>about:config</b> page to <b>true</b> via the right-click context menu or toggle the value with a double left-click.
* browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br /> -
How do I turn off "find my iphone" from the computer?
The phone was disabled and I cannot restore and back up until I turn off this featureYou can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702 -
While talking on my iphone, the phone tries to turn itself off. Not just once, but continuous, and not just dropping the call, but actually tries to turn itself off.
Well, then I'm glad this is most probably not a hardware issue - at least not an exceptional, maybe defect of all? -. This seems to be a good idea, because 2G will nearly everywhere available, so phone calls are not likely to drop at all. I'm just a bit confused, because they promised intelligent switch even during calls. For me that means that if the better, faster connection is available, then it uses that, and if it wouldn't be, then it switches to the slower one.
Anyways, thanks for your reply. I guess it's a "just get used to it" issue. -
I have a new IPhone 6 just went to the store last Saturday to connect it, (I am replacing my IPhone 5s) it says that I am updated on IOS 8.0.2 but now started to show a message that reads like this: " No SIM card installed" and I have no phone line or anything, my carrier is Sprint and I just got back from there and they told me that this is something I have to deal with APPLE because they have nothing to do with software. Anybody experiencing the same thing? any light in the tunnel? HELP....
Hello henry lfrommiami,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone gives you the message "No SIM Card installed" please follow the steps below.
Update your iPhone to the latest version of iOS.
Turn airplane mode on and then off again.
Restart your iPhone.
Check for a carrier settings update. Go to Settings > General > About. Install any available update.
Remove the SIM card and make sure that it's a valid SIM that your carrier provided. Also make sure that it's not damaged, worn, or modified. Then reinsert it.
A SIM tray that comes with one iPhone model won't necessarily work with a different iPhone model. When you insert the correct SIM tray, the SIM tray should be flush with the device.
If you have another SIM card, insert it. You can use a SIM card from any phone with the same format as your iPhone SIM card. If your iPhone works with that SIM card, contact the carrier that issued your original SIM card.
Restore the iPhone.
If you still see the issue, contact Apple support.
If you see 'No SIM' alert on iPhone
Cheers,
Alex H. -
Employees are trying to open up Pages document in Pages 5.0 but it says it cannot open the file. When the right click on the file and try to open it with the older version of Pages on their computer it says the .xml file is missing. Any way to fix this?
This is a user to user forum and Adobe Staff does drop by.
First thing to try is Reset the Type Tool by right-clicking on its' icon in the Options bar.
If you still have problems, it could be related to fonts. Here is a step by step troubleshooting help doc for that.
Troubleshoot fonts | Photoshop CC 2014, CC, CS6, CS5
And basic troubleshooting: Photoshop: Basic Troubleshooting steps to fix most issues
Gene -
It's been occurring every time I open FF.
I did check your account, as an exception you can have the complete CC for 49.99$ permonth for an yearly contract, please confirm if you wish to get that plan change, I can assist you with this or you can contact Adobe support too at Contact Customer Care
Regards
Rajshree -
When updating to itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.
1) The older version of Bonjour can not be removed. Contact your technical support group.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
My primary keyboard is English UK and secondary one Spanish. Until now when switching keyboards languages the spell check would automatically change to the desired language. Somehow it does not happen anymore. Any ideas on how to fix this?
The keyboard doesn't normally play any role in Apple apps regarding spellcheck. That is determined by system prefs/keyboard/text/spelling. Go the setup item at the bottom of the list and make sure that British English and Spanish are the only two boxes checked, and then set it to Automatic. How well it works varies a lot. You may also need to check Edit > Spelling and Grammar > Show Spelling and Grammar.
If you are still using Pages 4, spellcheck is determined by Inspector > Text > More > Language. Make sure that is set to the right thing for what you want to do.
Maybe you are looking for
-
Go to My Computer, Uninstall Programs, and uninstall in this exact order : Itunes Apples Software Update Apple Mobile Device Support Bonjour (my system required a reboot on this one) Apple Application Support Reboot your co
-
Computex girls? Which year of pictures do you have?
Computex is coming, which years of Computex girls's photo do u keep? I find pictures of Y2010, you can see MSI Notebook promoting it's Gaming series
-
Where has my itunes voucher gone
last night i put a 25€ Voucher on my pc to buy the i tunes match. it would not take it so i used my wifes credit card. and this morning my 25€ has gone why ???
-
Creating context node with dynamic type
When we are creating context node thru wizard, Dictionary type must be filled. I'm trying to create Context node manually.Did any one tried created Context node class with Dynamic type.
-
Outgrowing storage - best NAS/SAN options for OS X Server environment?
Hi All, We use an Xserve (2x3 GHz Dual-Core Intel Xeon) for our production/graphic design team. I have a 1TB ADM dedicated to "live" jobs and another 1TB ADM for "archived" jobs. (A third, smaller ADM houses OS X Server only...) Both 1TB drives ha