My ipad wont turn on it stops at the apple logo and i get little white wording that says this device is not using requires_boot_connect_on_reset
My ipad wont turn on it stops at the apple logo and i get little white wording that says this device is not using requires_boot_connect_on_reset. Not sure what is going on. also says appleBCMWLANBusInterfaceHTSIC reset chip
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808
Similar Messages
-
Please help
Well have you tried holding down on both buttons until the Apple Logo appears on the screen again? Hold both buttons down for about 10 seconds or so and when the Apple logo appears on the screen again, let go of the buttons.
-
Ipad wont turn on. Stays on the apple logo then flicks off
Hi need help. havent used it in over 2months cause of this problem and it not even 1 year old.
This should help, http://support.apple.com/kb/TS2802
-
hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?
Try here:
iOS: Not responding or does not turn on -
My iphone will not stop showing the apple logo and rebooting
How can i get my iphone 5 to stop rebooting and actually show my screen. All it does is show the apple logo and then its goes away and the screen stays on but shows nothing. I can triple click to invert colors but that only makes the black screen white. My lock button does not work either so i cannot hard reset
It appears you have a hardware failure. Certainly the lock button has failed. Without that button you cannot reset which is the first thing to try in cases like yours. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
-
I have witnessed a problem with my ipad
it stopped working suddenly and the apple sign shows but nothing happens afterTry the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808 -
My iPad wont let me download any games
The issue is that your credit or debit card credentials must be associated with the same country where you reside in order to purchase iTunes content.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching the billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations, although it’s worth nothing that features like iTunes in the CLoud and iTunes Match are designed to work best when using a single iTunes Store account, as you can only switch accounts with these services every 90 days."
From here > The Complete Guide to Using the iTunes Store | iLounge Article -
My iphone wont turn on after i updated it
You have an iBrick until you can get to a computer and restore it.
~Lyssa -
I logged out of my mac book pro to transfer some files from my hard drive. When logging back in, the computer is not logging in at all... it just get stuck at the white screen at the log in apple, and keep twirling.... and just wont log in... what do I do?
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
serial no is
Hi chelsealynn1205,
If you are having issues with your Mac not booting past the grey Apple screen, you may find the following article helpful:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Regards,
- Brenden -
What do I do if my IPad wont turn on completely and what I mean by that I see the Apple logo and I think that it is turning on and then
after a while i see the loading symbol which means that it isn't frozen and then all of a sudden it shows the apple logo once more and it repeats the aboveTry this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, try restoring the iOS software.
iTunes: Restoring iOS software - Support - Apple
If that doesn't work, try this.
iOS: Unable to update or restore - Support - Apple -
My iPad stopped working and I turned it off,and now after charging it won't turn on!It shows the apple logo that's all...What to do?
Have a look at the following document, I believe your iPad's condition is explained at its end:
http://support.apple.com/kb/TS3281 -
My.I.pod.video.wont.stop.showing.the.apple.logo.
Cause.the.ipod.wont.stop.shutting.off.and.turning.on.
Ive.tried.to.reset.it.but.it.wont.work.and.my.computer.cant.recognise.the.iopd.c ause.the.ipod.wont.stop.shutting.off.and.turning.on.
Windows XPTwo things first:
One posting is usually sufficient.
and
Please use spaces instead of periods. It is easier to read and word-wrap with spaces.
Regarding your iPod problem:
Start with The Five R's -
my new ipad 2 turnes to black screen with the apple icon in the middle while using it or if i just left it locked for a while, it just hanged and i have to restart it?! so why this is happening ?! is there is a productio error or something i can do to prevent doing this ?!
Appreciate responding as soon as possible.No, it's definitely not normal. Your User's Guide recommends a series of troubleshooting steps to go through when your iPad is misbehaving: As you're already in effect doing the first of the main steps, a Restart of your iPad, and that's not curing it, move on to the next .. a Reset.
To do this, press and hold both the Home and the Sleep/Wake buttons for about 10-12 seconds, until the display blanks and the red Power Off slider appears. Continue holding the buttons until the slider disappears, replaced by the black screen and white Apple logo.
This shows your iPad is starting to reboot. Release the buttons and allow the process to continue until the Lock screen appears again, then slide the slider to complete the process. -
Hi, I'm having trouble with my Ipad 2. I was recently playing a game and my ipad just shut off on me. Then when I turned it back on it was stuck on the Apple Logo and it won't go to the home screen at all. I plugged it in my itunes but I don't know what to do from there. I left it charged hoping the apple logo would dissappear but it didn't and now for some reason the battery is always dead. I really need help. Does anybody have any suggestions? Please.
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore
Maybe you are looking for
-
HP LaserJet Pro 300/400 (M375nw & M475dn) - Driver packages will not install
Hello all, I need some assistance with a very persistent and frustrating issue trying to get driver software packages for our LaserJet M375nw & M475dn to install correctly. We are running Windows 7 Pro x64 on HP 8300 desktop PCs. We have these printe
-
Report Parameters with a space between, not working
I have a problem with a report in SQL Server 2012 that uses cascading multi-valued parameters. I am using AdventureWorks2012DW as a sample, and all parameters work except for one with a space in this case its SalesTerritoryCountry and the parameter i
-
Missing indexes after system copy
Hi All we have around 70,000 missing indexes after the system copy offline export from source with sun solaris oracle To Linux oracle but these appeared after we Run SGEN , which took 60 hours for a 200 Gb database. and target system response is al
-
E61 - multiple browser windows possible?
I haven't found a way to open a 2nd browser window using the built-in web browser on the E61. Is anyone aware of a way to open a link in a new window, such that you can have 2 or more windows open simultaneously? The obvious technique of holding down
-
WLS 10.3.3 not supporting SHA2 cert at provider end . (wild card certificate cannot be imported to trusted certs) During integration from OSB 11g we face below exception : General runtime error: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable ce