My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked

My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked briefly as a temporary fix but not anymore

You could try this
Temporarily disable security on your home network
See if the iPad connects
If it does then reset the security - with the same or different password

Similar Messages

  • My 4th Gen iPod Touch won't open up the apps I've downloaded. I've tried uninstalling and then reinstalling the app and it seems to only be a temporary fix. The reset and reboot didn't work either. Help would be appreciated.

    My 4th Gen iPod Touch won't open up the apps I've downloaded. I've tried uninstalling and then reinstalling the app and it seems to only be a temporary fix. The reset and reboot didn't work either. Help would be appreciated.
    In more specific terms. The apps that came on the iPod like the weather and maps and whatnot have been working flawlessly. It's just when I download an app and then disconnect from wifi it's almost like I'm on a timer until the app stops working. It acts like it wants to open, the screen flashes black then resets to the home pages. I've tried all of the basic fixes, rebooting, reseting, uninstalling then reinstalling. But like in my...long...question, the reinstalling option only seems to be a temporary fix. I just recently downloaded the 5.1.1 udate (I think that's what it was) does that have anything to do with it, or am I just derpy when it comes to iPods?

    Try the other suggestions here:
    iOS: Troubleshooting applications purchased from the App Store
    Then try a restore.

  • How to set the router and play the Command & Conquer using direct IP mode?

    My router is WRT54GFirmware Version: v3.03.1
    How to set the router and play the Command & Conquer using direct IP mode with other computer?

    Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
    can you give a few more details.

  • Replacing the router (and maybe the modem)

    I've had loads of problems with my infinity. Essentially it is incredibly variable, going from the full 75MB/s DL to 0.37 MB/s DL which gets very annoying. A lot of my devices also tend to lose the wireless despite being in the same room as the modem/router. I know the problem doesn't lie with the devices as they work everywhere else, therefore I am looking to change the modem/router.
    I purchased this one a while back it's the Netgear N300 Dual Band Modem-Router. I am just wondering if it is able to completely replace the modem and the router, or even just the router? I.e. will it work with infinity?
    If it won't work, can anyone suggest an alternative router for me?
    Many thanks

    chayes030 wrote:
    So we've spent a long time living with these problems and I got fed up and tried to get one of my friends to play about with the netgear modem-router i got, to get it working. unfortunately he couldn't link it up to actually get the internet, and he thought it was because the router wasn't actually recognising the modem and therefore picking up the internet.
    I'm just wondering on the routers set-up bit, there's an area where it asks if my internet connection requires a password, is that where I put in the Homehub login details?
    If i'm spouting rubbish point me in the direction of a step-by-step guide on what to do (i've tried searching myself but i don't think i know what i'm actually looking for!!) and i'll follow that to the letter and see if it works!!
    Hi there,
    First off, make sure that you're connecting the ethernet cable that's coming from the OpenReach modem to the port marked WAN on the back of your router. If you connect it to any of the other ports, it won't see the connection.
    Another thing you need to do is in the username/password fields for your connection the login would be [email protected] and the password is anything you like, but most people just use "bt" - Just don't leave it blank, or it won't connect.
    See below for a screenie (A picture tells a thousand words and all that)
    I hope this info helps

  • HT203242 I've tried all of the suggested solutions, but I still can't get my cd drive recognised.  If I delete the driver and rebot, the cd drive appears, but as soon as the driver automatically installs, the driver disappears into the Q: drive

    I've tried all of the suggested solutions, but I still can't get my cd drive recognised on my laptop.  If I delete the driver and reboot, the cd drive appears, but as soon as the driver automatically installs, the driver disappears into the Q: drive, which is not accessible and neither is the CD drive

    I had the same or similar problem after installin iTunes 11 on my Acer Laptop with Vista. The new iTunes ran but I
    completely lost access to my CdRom/DVD drive. Error Code 19 was displayed in Windows Device Manager. Found out
    this is more widespread of a problem than expected.  After trying several forum recommended fixes, the Only thing that gave me back my CdRom drive was doing a Windows Restore to a date prior to iTunes 11 install.  I got my drive back but it also restored me to the prior 10.0.7.21 vers of iTunes which no longer worked due to missing files. iTunes help
    recommended a Reinstall.  I am reluctant to do that for several reason.  That's where I am at for now until I find out if there are any other risks for using iTunes 11 vs. Registry Errors vs. Losing access to my CdRom drive.  Brad

  • Applescript to ssh into router and reboot

    I'm trying to write an applescript that will ssh into my router and reboot the router.  I would like this so that my wife can simply execute an automator file and it will restart the router without her having to unplug the router.  I've got the following but it's not logging into the router. Can anyone offer suggestions one what I'm doing wrong.  Thanks.

    Is this an 'expect' script?
    Or are you trying to send these commands to the router to be executed?
    If sending to the router you could put them in a file and then have ssh read the file contents and send it to the router
    ssh -options [email protected] <file.with.cmds.to.be.executed.on.router
    If this is an expect script, have you run this from a regular terminal session?
    If you are into blind faith, you could just send the commands you expect to work and not bother looking at what is returned
    ( sleep 2
      echo 12345
      sleep 4
      echo reboot
      sleep 10
      send exit
    ) | ssh [email protected]
    The sleep times are assumes to give the router more than enough time to return the expected prompt.  Adjust accordingly.
    This is "Rude and Crude", but would it work?

  • IPod no longer detect the router and can't connect to internet

    Hey guys, i'm new in the community and thought that you may can help me with a lil' problem.
    I bought my iPod one month ago and at first successfully connected to internet, then download the iOS 4.3 and continued working well for a few days 'till it just stop connecting to the web. I searched everywhere and found some things that helped but not solved my problem.
    I have all my network data, the IP, Subnet Mask and DNS, the only one that does NOT work is the Router. I even tried putting the numbers myself by Static, but it didn't work.
    Can somebody help me or tell me what da **** is goin' on?
    By the way, my Internet service is Prodigy Infinitum ('cause i'm Mexican).
    Thanks(:

    Try:
    - Resetting your iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Powering off and then back on your router
    - On the iPod reset netwokr settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

    Hi,
    WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
    I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

    The answer to your question is - neither!
    Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

  • Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    #1
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    #1.1 n/a because the errror message overrides it
    #2 see #1
    #3 iOS: Device not recognized in iTunes for Mac OS X
    But could be caused by #1
    #4 Covered by previous ones
    #5 Obvious jpegs are photos and thus will not sync as videos. Also see:
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    iTunes: Frequently asked questions about viewing and syncing videos
    #6 iOS: If you can't back up or restore from a backup in iTunes
    First #7 See #6
    Second #7 You have so many other problems resolve those first
    #8 Resolve other problems first

  • My Wi-Fi just says connecting, but never connects. I've rebooted the router and the phone.

    Well that was it. My Wi-Fi just says connecting but never connects. I've rebooted the router and the phone. LG G2

        ETea,
    Sorry to hear about the trouble with Wi-Fi. Let's get you connecting again. Are other Wi-Fi capable devices able to connect without issue? Go to Settings and touch Wi-Fi. Touch your network and select "Forget." Touch "Search" on the bottom. Once the phone detects the network again, touch the network, enter your password and select connect. Let us know if you get connected.
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • My kid just got an iPod 5th gen (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line and lightning symbol. No other response at all.

    Sorry about the long title.....its my first post.
    My kid just got a brand new iPod 5th generation (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line on left and lightning symbol below. There is no other response at all no matter what I do, including holding both buttons down for extended period.  My other kid got one and it works perfectly.....I have interchanged usb cables ports etc. but still no response....I would really appreciate any help.  

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    -  Make an appointment at the Genius Bar of an Apple store since you have a hardware problem with the iPod. This is because as you said the same cable works with another iPod.
    Apple Retail Store - Genius Bar

  • I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full" i dont know what to do. Its been 2 days now.

    I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.

    yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

  • TS1398 My iPhone 5 lose the wifi signal all time. Inclusive in the same room of the router, millimetres close to the router and is loosing the paint only in my pocket. What can I do?. The 3G signal of 3uk network it's so weak and I can use my iphone prope

    I'm really upset with my iphone. I have it for four months and the wifi and 3G connections are really poor. The wifi is disconected all time near to the router and the 3G connection it's really poor. I was waiting 6.1.4 to see if the problem would be fix it but is the same. What can I do?

    Try these steps. Check to see if your router has a firmware update. Go to the manufacturers website and check. If so, install. If not, reset the router. Disconnect from power for 30 seconds, plug it back in. Wait for it to boot up and then check your wifi.
    Do a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check wifi.
    If none of this helps, then make an appointment at the Apple store to have the hardware checked. If it is found to have a hardware defect, they will more than likely replace the device. Remember the final call is Apple's.

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

    I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues).  And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

    Thanks, I appreciate the help.  I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

Maybe you are looking for