My ipad2 was working fine last night, but this morning is unable to connect to ANY wifi networks (though it can detect them).  All typical solutions fail.  What can i do?

My ipad2 was working fine last night, but this morning when I woke it up... it no longer was connected to my network.  While it can detect networks, it cannot connect to any (have tried at home and at work).  I have tried: resetting router, resetting ipad, forgetting network, renewing lease on network, ensuring airplane mode is off, resetting network settings, turning wifi on/off.  None of the typical solutions I can find online seem to work.  HELP!

You've gone through all of the basics. You might look at this document regarding potential issues with wi-fi environments. 
http://support.apple.com/kb/HT4199
If none of that works, and if a device restore doesn't work, it's time for a trip to the Genius Bar. 

Similar Messages

  • My charter email account was working fine last night and now today my mac book pro keeps requesting the password and when I enter it, it still cannot receive mail?

    Fairly new to mac, and today my charter email account keeps asking me for password which was working fine last night when I went to bed. Now today it states that it is not the correct password and I cannot get my mail? What should I do here?
    Thank you

    Hello zeern2003
    Start with the article below to troubleshoot issues with Mail sending and receiving email. You may not have to do every step, but pay attention to what is relevant. Start with using Connection Doctor to bring up a window that will tell you what could be the issue.     
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Regards,
    -Norm G.

  • I can't get my trackpad on my MacBook to click. It was working fine last night.

    I'm not sure if its the battery expanding (but since it was fine last night), it could be the battery expanding.
    Apple representatives told me that the battery expands to let us know the battery needs to be replaced and when it expands the enlarged battery  won't allow the trackpad to click, when your pressing it. 
    Clicks also won't happen when the area under the trackpad  gets dirty. 
    Does anyone know if there is a way to check to see if the battery is good without taking the MacBook apart?  Also, there is no error Exclamation Point, on the top right of the screen. That happened to my MacBook Pro, as well as an inability to click the trackpad.
    Any advice is greatly appreciated, Sean

    KaneoheSean wrote:
    Apple representatives told me that the battery expands to let us know the battery needs to be replaced and when it expands the enlarged battery  won't allow the trackpad to click, when your pressing it. 
    That's just not correct. Swelling in the battery is caused by overheating of one or more cells in the battery, followed an exothermic chemical reaction of the anode (usually lithium cobalt oxide). It can cause simple swelling or even complete failure in the battery (including fire). It is NOT something by design to tell us that the battery needs to be replaced. It is a runaway thermal process in the battery.
    Minor swelling might be ignored with no further issue. When in doubt, have the battery checked by Apple or an authorised repair centre.

  • My ipod touch g2 was fulling charged last night and this morning the screen is completely black and I cant get it open and when I charge it nothing changes.how can i get my ipod to turn back on

    my ipod touch g2 was fully charged last night and on.  I think i fell asleep on it and this morning the screen is blank and I cant get it to power up.  charged it again and still nothing.  How can i get it to power back up

    have you tried holding the power button and the home button for 30sec till you see the apple logo?

  • My airport is activated but refuses to be connected to any local network and does'nt detect them

                                         I  have a macbook pro system leopard  and the problem encountered is my airport is activated but does'nt detect any local network and remained disconnected. Can anybody give some help please ?

    You don't want a WEP based network.  Those are easily cracked.  If your network is WEP, it may have already been cracked, and someone changed the password.  Change it to WPA2.  If you are stuck with an 802.11b device on the network, hook it up via ethernet based 802.11g or better wireless/ethernet router.

  • IPod 5th gen won't turn on. was fully chargd last night and this morning it's staying off. how do i save it? (my home button doesn't work)

    it's also not being recognized by my laptop and itunes

    Try:                                               
    - iOS: Not responding or does not turn on           
    Ignore the reset and when it says place the iPod in recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                          
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT1926 i had itunes on my pc for a number of years. worked fine last night even. today, nothing, screen gave error 7, windows error 126, tried removing and re-installing, still same message. says I am missing MSVCR80.dll

    I have had Itunes on my pc for years. Worked fine last night. Today it gave me a message missing MSVCR80.dll, tried reinstalling, didn't work. Removed Itunes completely, reinstalled. Didn't work. Same message. Any fix ideas?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99196)

  • "Unable to find PPoE server" - worked fine last night!

    *The set up:*
    Belkin ADSL modem (with ethernet jack)
    TC 500gb
    MacBook Air
    I have the Belkin ADSL modem (not a router) connected to the Time Capsule using an ethernet cable. When I set up the modem, I used a web based interface to enter the username/password settings for my connection. The modem connected ok, and works fine.
    During the Time Capsule set up procedure, I was asked how I wanted to connect to the internet. I was given the option of Ethernet, or PPoE.
    Assuming Ethernet was the correct option to use, I selected this. However, an error message was received telling me that the amber light would not stop blinking until this was resolved.
    I therefore changed the setting to the only other one available, which was PPoE. On the next screen, I was asked to enter my username/password for my internet connection, which I did.
    This was successful, the light went green, and I could access the internet.
    That was last night.
    *The problem:*
    This morning, I decided to change the name from "Chris's Time Capsule" to just "Time Capsule". After clicking update settings, I am now receiving the message about the amber blinking light again. I am told this issue needs to be resolved, and I can no longer access the internet.
    So I have tried chosen Ethernet from the menu again, however this does not work. Choosing PPoE no longer works now either.
    I'm confused why the device has suddenly decided to not work, despite working fine last night with exactly the same settings. Also, all I changed was the name of the device- I'm suprised this has resulted in the Time Capsule not working anymore.
    Can anyone perhaps suggest a solution?
    Thanks in advance!
    -Chris

    Hi Uma,
    Open your SAP MMC and from menu option select file->add/remove snapin...
    Click on add button and then select "SAP Systems manager".
    Click next on the next screen and then specify System ID, Instance (as hostname instanceNumber) and then click on add button.
    It will add this system in the list in sapmmc.
    Regards,
    Bhavik

  • My ipad mini was working fine until i installed this last update, now it wants me to reset it and it want let me , What do I need to do?

    my ipad mini was working fine until i installed this last update, now it wants me to reset it and it want let me , What do I need to do?

    Try resetting the phone:
    Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release.

  • I am having the same slowness, irratic, unstable issues with Thunderbird that I had 9 months ago. T-bird worked fine last sunday but now is unstable,

    Slow to download email, slow to respond or open email, slow or unable to delete email, "A script on this page may be busy....error message when trying to delete an email. I had similar problems before (9 mo ago) but they went away after dealing with McAfee. Thunderbird worked fine last sunday but when I tried to use it today I now have all these problems.

    McAfee has been causing problems again this week, so the remedy remains the same:
    https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#McAfee

  • This morning, my macbook pro won't turn on even though the battery is charged and power cord is working. it worked fine last night. what can i do?

    This morning, my macbook pro laptop won't turn on even though the battery is charged and power cord is working. it worked fine last night. what can i do?

    Try the suggestions in this support article:
    http://support.apple.com/kb/TS1367
    Ciao.

  • Any idea why a 3 month old new IPad won't turn on?  It has been charged today and was working perfectly last night while I used it to read a book.  I have tried both the sleep/wake button and the on/off button on the front.  Nothing is happening.

    Any idea why a 3 month old Ipad will not turn on?  It has been charged and I haved tried the sleep/mute button and the on/off button on the front.  Nothing is
    happening.  It was working fine last nigh?

    1. Hold both the Sleep/Wake and Home button down together
    2. For 10 to 15 seconds
    3. Until you see the Apple logo
    4. Ignore the red slider
    Note: Repeat it if it doesn't work the first time

  • I have Power Mac G5 1.8 single. I have a problem with ethernet port, before it was working with the internet, but now i shows it is connected even the cable is disconnected. I'm running Leopard 10.5. any help

    I have Power Mac G5 1.8 single. I have a problem with ethernet port, before it was working with the internet, but now i shows it is connected even the cable is disconnected. I'm running Leopard 10.5. any help

    Reset the PRAM.
    http://support.apple.com/kb/HT1379
    If that fails, reset the PMU.
    Scroll down the following page and click the G5 link for instructions:
    http://support.apple.com/kb/ht1939

  • Hi, I was working at home with my iPad, everything was going well. It went out battery and after this I am unable to connect to the wifi at home. Before getting out battery no problem, and now it sees the router signal but it is unable to connect to it.

    Hi, I was working at home with my iPad, everything was going well. It went out battery and after this I am unable to connect to the wifi at home. Before getting out battery no problem, and now it sees the router signal but it is unable to connect to it.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iphone 4 got damp last night and this morning it is locked with a lock symbol in the upper right corner.  How do I unlock my phone?

    My iphone 4 got damp last night and this morning it is locked with a lock symbol in the upper right corner.  How do I unlock this so I can use my phone?

    The orientation lock was turned on by someone. See https://sites.google.com/site/appleclubfhs/support/advice-and-articles/locking-o rientation

Maybe you are looking for

  • Deploying RPD in OBIEE 11g

    Hi , Is there a way to deploy RPD in OBIEE11g with out using Enterprise Manager because i have logged on to Enterprise manager and when i click on Business Intelligence/Coreapplication Its take lots of time and still not going to next step. can any o

  • Do you need internet connection to use pacman? [solved]

    Yes you do.  Sorry for the dum question, Do I need to have internet connection to use pacman? Thanks The reason I ask is because I need madwifi for my wireless and Arch does not allow me to install this file using pacman -A ...... Last edited by viga

  • Lion and Hotmail

    I installed Lion yesterday, but am unable to load attachments in Hotmail "Attachment ID has bad format"

  • Publishing to another MobileMe account

    I am creating a site for a friend in iWeb. I want to publish that site using his MobileMe account. The Site Publishing Settings does not allow me to change the MobileMe account from my account to his. How do I do this?

  • Difficulties downloading content via ftp from some web sites

    I'm having difficulties ftp'ing content from some web sites when using my Airport Extreme (802.11n) base station. The AEBS is running firmware 7.3.2, is connected to a cable modem, and is configured in NAT mode. The inability to download is independe