My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.

My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.
I have an iPad 2and have not had any trouble until I up dated my os. I have a pc with win 7. I do not sync since I have so much music on my computer. I synced my apps during the back up but I had to manually reload my music and videos. Since then I turned off all syncs.
Since I have to load all my movies on this has been happening. I get through about 4 movies then it will hang up. I eventually get an error message that it cannot load this movie. I then attempts to close out. This seems to hang. When I attempt to eject the iPad it attempts to sync and that never finishes. I pull the plug and that stops the sync but I have to restart the computer before I plug back in the iPad or it will not recognize it or it will attempt to finish the sync which never ends. It sometimes hangs on something with safari and site protection.
After I restart my computer I can put in 4 or so movies, including the one it hung on before, but it always hangs up again. Any suggestions?

I am having an almost identical problem and hoped that iOS 6 and the new iTunes would fix it. Regrettably, I again got 3 movies synced last night before iTunes locked up and gave me the xxxx cannot be synced "because the file cannot be written" message. Same deal with iTunes hanging on "finishing sync" after that and me having to remove the iPad from the cable to get things to come back to life on the PC (Win 7 64 bit).
I've also done a factory restore followed by a restore from backup and have the same problem.

Similar Messages

When loading firefox i get an error message, "can't find ////jpsnotify.exe. now firefox loads but every time i go into anything else it appears. this started to happen when i downloaded a new verison of java.

i downloaded a new version of Java and i then started getting "windows can't find c:\java\jre6\lib\deploy\jqs\ff\..\..\..\bin\jqsnotify.exe. now this only happens when loading firefox. it happens through out the use of firefox when loading other programs. any suggestions?
== This happened ==
Every time Firefox opened

Try re-installing Java. See [[Using the Java plugin with Firefox]]
A quick search for jqsnotify.exe on Google indicates that it is related to the Java quick start option.

I am trying to open my Nightmare 2.jar file but java will not open. It says check console for error messages but there appears to be none. I have the latest version of java and I have both the 64 bit and 34 bit se6 set to the top of the list.

Just like in the title of this discussion the file will not open. Any suggestions? That would be grrreat.

Hi,
The D810 requires Camera Raw 8.6 or later - the latest version that is compatible with Photoshop Elements 12 is Camera Raw 8.5 as far as I can see.
You need to either buy a new version of Photoshop Elements or use the free Adobe DNG converter.
DNG Converter 8.8
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuihw
Brian

OSEHQ is compressed (notebook won't load windows and gives this error message)

Hi there,
my noetbook wont start windows, and gives this message when i turn it on-
OSEHQ is compressed
Press ctrl+alt+del to restart
The last thing I remember doing was compressing my C drive to save some disk space.
please HELP!

Yep, compressing the hdd can cause all sorts of problems.
http://www.vistax64.com/tutorials/202609-bootmgr-compressed-message-boot-fix.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Ibooks will not open the featured books page and gives an error message can't connect to iTunes Store. I have logged out and back in again and have restarted neither have worked. Any other suggestions?

ibooks will not open the featured page on my ipad and gives an error message that it can't connect to iTunes Store, despite the other tabs working. I have signed out and back in again I have restarted neither worked . What else can I do?

Hello Tm115,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Best of luck,
Mario

My iPhone 4 I can not activate and when you try to give me a message for activation activation can not now try later

my iPhone 4 I can not activate and when you try to give me a message for activation activation can not now try later

What is the exact wording of the error message?
Is there a sim in the iPhone?
Has the iPhone been jailbroken or modified to work with
other than the original wireless provider?
Did you recently restore the iPhone or update the iOS version?
What cellular provider in which country are you attempting to use
the iPhone with?

Why do some of my songs have an exclamation point in Itunes? When I try to play it gives an error message that it can be located?

Why do some of my songs have an exclamation point in Itunes? When I try to play it gives an error message that it can be located?

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around....
Hi Guys, I upgraded from FCPX 10.0.6 to 10.0.78 and discovered to my immense frustration that many of my 100+ FCPX projects would not load.
Symptom:
FCPX 10.0.7 appears to hang ("spinning beachball") with either high CPU% on a single core or with 1-2% CPU busy (activity monitor.app) when a FINAL CUT PROJECT is selected. No logs error information in /var/logs ..hmm
notices that the "status circle" spins around endlessly.
Actvity Monitor.app shows "Final Cut Pro (Not Responding)
and also I notice in some cases that an OEM filter ("NEAT VIDEO NOISE REDUCTION") is in progress to be loaded. FCPX V10.0.7 must be FORCED QUITtted to remove it from system.
History: Upgraded FCPX from V10.0.6 to V10.0.07.
"FINAL CUT EVENTS" and "FINAL CUT PROJECTS" on a single file system on SAS 16TB disk array (768MB/sec read via AJA system test) and 60% utilised capacity… FCP EVENTS has 400 events in it .. some 5.2TB of Prores essence etc .. all works fine! (i.e. the storage system is first class and is NOT the issue)
32GB of RAM on MAC PRO 2009 Nehalem 16 x Vcore with ATI 5780 card and ATTO HBA's (i.e. plenty of resources!)
As usual with any "upgrade" to FCPX 10.0.? all the EVENT objects need to be upgraded. In my case this takes an hour or two.. so I do that when asleep.
After experiencing above, I restored the FCPX EVENTS LIbrary of that file system from LTO4 tape archive (BRU-PE ) and still had the same issues as above.
WORKAROUND:
FORCEd QUIT FCPX V10.0.7
RENAMEd "/volumes/some_file_system_volume/Final Cut Projects" to "/volumes/some_file_system_volume/Final Cut Projects_original"
created (make) a new "/volumes/some_file_system_volume/Final Cut Projects" (use finder)
For each project !!! in "/volumes/some_file_system_volume/Final Cut Projects_original", (do one project at a time!!!)
MOVE "/volumes/some_file_system_volume/Final Cut Projects_original/one_fcpx_projext_nnnn_folder" to "/volumes/some_file_system_volume/Final Cut Projects"
Make sure you move ONLY one project at a time. If you have a subfolder of projects, please do each project one at a time (serially!)
Launch FCPX V10.0.7 and BE PATIENT!!! .. DONT click or fiddle with the UI.. it seems when you intervene it locks up as well…
Let FCPX V10.0.7 settle….
select the project you just added above and RELINK any objects it needs. Thumbnails and proxies will be rendered again.. just be patient
wait until ALL the rendering as stopped.
QUIT FCPX V10.0.7
(now if FCPX locks up, just force it out and start again as above).
repeat for all projects in "/volumes/some_file_system_volume/Final Cut Projects_original" (go to step 4 ad do until all projects moved)
When all is COMPLETED MAKE SURE YOU ARCHIVE an instance (or make a backup ) of "/volumes/some_file_system_volume/Final Cut Projects"
If this procedure has worked the folder "/volumes/some_file_system_volume/Final Cut Projects_original" will have zero (nill, none) projects in it.
I have managed to restore ALL my "/volumes/some_file_system_volume/Final Cut Projects" this xmas between drinking etc. I'm satisfied that its all ok.
Other issues:
use DISK WARRIOR or TT PRO 6 to make sure that the file system volume where your "/volumes/some_file_system_volume/Final Cut Projects" are is physically ok. I noticed some entries in file system's volume table that represented objects in "/volumes/some_file_system_volume/Final Cut Projects" were at fault when I used these utilities… FWIW.
SUMMARY: yes this took ages to d, however luckily I had everything in at least 3 instances in an archive which has saved me many time in the old FCP& and prior days… it was just a matter of time to put it back together.
I put this outage down to may be my own impatience when I first fired up FCPX 10.0.7 after the upgrade.
I'm interested if this workaround is helpful to others and in addtiion if others have a more satisfactory remedy.
HTH
warwick
Hong Kong

Hi Eb, yeah I could not see any "memory leak" or unusual consumption of REAL memory whose less availability would cause excessive PAGEing and SWAPping as seen in the Activty Monitor.app
I watch this carefully especially the use of REAL MEMORY by 3rd Paryy apps. BTW there are a few that cause ALLOCATED but NOT USED memory (blue in the A.M.app UI). Simply a unix PURGE command can release that memory and help clean up the PAGE and VM swap files (its alleged!).
Yes, you may be might with the element of "Luck" involved. I would add though, that having MULTIPLE project displaying in the STORYLINE window and loading always caused my FCP 10.0.7 jam up at startup with h symtoms and observations I described.
TIP: I might also add that for a super speedy launch of FCPX one may also emply setting each PROJECT's UI to show only AUDIO thus negating the need to contstruct or reneder out a PREVIEW ui in each clip in the storyline.
Your/Apples suggestion of the movememt (rename) of "Final Cut Pro Projects" to "Final Cut Pro Projects Hidden" is similar to what I proposed above to stop FCPX 10.0.7 accessing and building it up at startup. This workaround has been useful inthe past as well.
ALso one might also get the stick out and remove (delete/rm) the ~/Library/Saved Application State/com.apple.FinalCut.savedState in one's home ~/Library so that FCPX wont do such a neat job reinstating FCPX last time you crashed it... This has been helpful also in diagnosing my issues.
Lastly I have noticed that:
impatience clicking on the FCPX UI when in the unstable state causes it to lock up with NO visible CPU% busy.... as if its waiting on something which is usually me MEMTERMing it via FORCE QUIT and
the projects where I have employed the NEAT VIDEO Noise Reduction OEM filter for FCPX seem to exasserbate the PROJECT loading issues when several PROJECTS are available at FCPX startup time.
As of yesterday I have some 400+ EVENTS Final Cut Pro Events and 130+ projects of varying compexites in a single file system on Final Cut Pro Projects all working fine and as good as gold again!
Oh and one more thing, I had to RE-RENDER many projects of them again... strange as the FCP PROJECT library was renstated from a recent LTO archive as of V10.0.6 FCPX.. strange that...I would have expected if the projects and events were 10.0.6/7 compatable as proposed by Tom, that this would not be necessary... hmm straneg that
I'll monitor this thread.
Thanks for your comments lads!

IPhoto 11 and 10.8.2 Hangs when loading library

Ok.. I have just done my 4th clean install of Mountain Lion in the last 3 months. Due to issues I've manually restored my iPhoto, iTunes, iMovie and Garageband content back to my new clean system and then opened the above mentioned programs.
The problem is that iPhoto will not get past the opening after I choose the iPhoto library.
My test account will open a blank iPhoto library. But the main user account just hangs when loading the library.
So far I've done the following.
Launched with Command and Option and rebuilt the library and used the iphoto library 3rd party tool to rebuild the library.
I've cleaned disk permissions.
I've run Onyx and cleaned the entire system.
I've trashed iPhoto and reinstalled iPhoto from the iPhoto 11 disk and then updated through the App store.
What else can I try? My iPhoto library is 54 Gigs and is all my digital photos of my kids since they were born 10 years ago.

One simple thing you can try is Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

When i load i tunes, it comes up with error message stating "i tunes has stopped working.A problem caused the program to stop working correctly. Windows will clode the program and notify you if a solution is available". I have no idea to fix

New laptop, load itunes to find a error message that states, "i tunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". It has me stuffed on such a problem that should be easy to load. Please help!!!!

Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling

In which table the initial balances will be stored when loading via api

Hi all,
I am doing initial balances migration...
In which table the initial balances will be stored when loading though an api.. (pay_balance_upload.process).
First I have loaded data in to pay_balance_batch_headers and pay_balance_batch_lines tables..
Then called the api pay_balance_upload.process. and the data was reflecting correctly in front end.
But we need to reconcile the loaded data.. for that, can anyone please tell me in which the loaded balances would be stored..
I have identified two tables, pay_assignment_latest_balances
and pay_latest_balances
when I try to create a balance from frontend I can see the data in pay_latest_balances table..
But when I load via api I am not able to find it in any of these tables..
In addition to that can anyone please tell me when the data will be populated in pay_assignment_latest_balances and pay_latest_balances tables.
Awaiting for your help and quick response..
Thanks and Regards
Kishore

You have followed the correct process..As Vignesh said, you can use pay_balance_pkg.get_value to make sure you have the correct values uploaded but otherwise if you are able to see the values in the front end I wouldn't worry about the latest balances tables. These tables, as the name indicate, hold only the latest values and if a payroll (ran post the initial balance upload) has been rolled back, these are deleted since they are no longer available.
You can refer the below Metalink notes for a detailed explanation:
The Secret Life of Initial Balance Upload with Screenshots Example [ID 60057.1]

Sometimes when I'm trying to download an app from the app store when it is trying to load I get the error message cannot connect to iTunes store. I am on the internet. Any ideas?

Sometimes when I'm trying to download an app from the app store when it is trying to load I get the error message cannot connect to iTunes store. I am on the internet. Any ideas?

I have the same issue. How did you solve it?

My 64Bit Adobe CS6 hangs when loading a file

My Windows 7 Adobe CS6 v13.0.1 x64 hangs when loading a file. However the CS6 v13.0.1 x32 application runs correctly. Do I need to re-install Adobe CS6 Upgarde?

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

When I try to sync photos, I followed all the steps, picked one folder. When I hit "apply" I get this error message: Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad. What have I done wrong

When I try to sync photos or music, I followed all the steps, picked onle folder, not the whole library. When I hit "apply" I got this message:
Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad" What can I change to just download the photos and not interfere with the apps?
(By the way, the memory is not even one quarter full)
Thanks for your help - Pat

I have the same problem. I updated my mac to 10.5, which then had me update apps like itunes, etc. then it wanted me to sync my purchased music to my ipad before i updated the ipad...which worked ok. then when i was syncing the photos i got the same message when i hit "apply" asking are you sure you want to delete the 12 apps from the ipad - clicked "no" and brought me back to the original screen. Got the same message when trying to move them from the hard drive to the ipad. WHat is going on and how do I correct this? Thanks

My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.

Similar Messages

Maybe you are looking for