My Ipad2 won't turn off.  I've tried the reset method,  holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either.  Help ??

My Ipad2 won't turn off.  I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work.  I can't get onto the internet via wi-fi either (don't have a 3G card fitted).  All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

Look at last link.
Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

    # Question
    I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

    You probably have not seen anyone reporting the exact same problem as you. All three crash reports have the same crash signature and as currently ranked 67 it is not the commonest of reasons for a crash.
    I hope you enter your email contact information when reporting crashes. I note you see this crash when using videos, others may possibly see this crash in other circumstances.
    You have already tried the obvious, attempts at a fix so it is now down to wait and see, maybe developers working on the bug will report something or fix it.
    Did you try my suggestion of installing portable ESR ?
    For forum cross referencing purposes
    * Crash Reports for Crash IDs <br />bp-71697f5d-41d4-48ae-9db9-3e6302130607<br /> bp-6e1347bc-153f-433a-9c35-a5f022130607<br /> bp-92a533a2-9e09-4c1e-8df7-deb4c2130607
    *(all three) Crash Signature: EnumSoftwareMFTs(_GUID const&, unsigned int, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, IMFActivate***, unsigned int*)
    * Related bug 858667 NEW crash in mozilla::wmf::MFTEnumEx @ EnumSoftwareMFTs
    *I note this was first seen in Fx21 and is 100% Windows 7
    <br />

  • I cannot open my email. All other functions work ok.

    I cannot open my email. All other functions work ok.

    Assuming that you mean that the Mail app isn't working properly as opposed to it not being able to download your emails due to account/password problems, then try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • TS3276 Mail screen is stuck on draft screen the past 4 days. Safari and all others are working. But when I click on mail, it shows the draft screen. This is the last thing I was working on. I was able to send my mail then. Then the screen just stuck on th

    What to do if the screen is stuck on the draft screen? I was writing a mail, saved it as draft, then later, was able to send it. However, the screen did not revert to the inbox page. The draft page seems to be hung or stucked. Safari and all others are working ok though.

    I sent the draft to myself several times. That did not seem to be working, but when I opened Mail this morning, it has been sent all of the times and the Mail screen is no longer frozen.

  • I have acquired a macintosh 950 computer made in approximately 1995, which powers up just fine, except that I cannot get the system to recnogise a keyboard and mouse.  Any suggestions would be helpfull!!

    I have acquired a macintosh 950 computer made in approximately 1995, which powers up just fine, except that I cannot get the system to recnogise a keyboard and mouse.  Any suggestions would be helpfull!!

    ray,
    We just moved a couple of those CPUs the other day.  Can you indicate your location with the name of a city near you?  A user group might be nearby.
    Jim

  • IPOD WON'T TURN ON EVEN AFTER TRYING TO RESET IT

    PLS. HELP! MY IPOD WITH VIDEO WON'T TURN ON EVEN AFTER TRYING TO RESET IT. THE BATTERY IS FULL. IT WILL JUST TURN ON AFTER 24HRS. WHEN THE BATTERY IS DRAINED EVEN WITHOUT USING IT BECAUSE IT IS IN FROZEN STATE. FOR INSTANCE AFTER DISCONNECTING FROM THE COMPUTER SAFELY AFTER CHARGING IT I KEPT IT OPEN BUT WHEN IT TURNED OFF AUTOMATICALLY IT WILL NOT TURN ON.

    Ok well, if you do not have the Ipod starter disk, you can’t do very much to save it anymore. It is completely gone.
    At this point I would recommend you calling Apple and setting up a repair. I would suggest you buy their warrantee plan, ($50 and good from 2 years) and it starts as soon as you buy the plan, NOT when you got your Ipod. The reason I would suggest that is, because if they deny your problem (like they did to me 5 time before finally replacing mine) it will save you a LOT of money. There may also be further issues as well with your Ipod.
    Apples SoS number is:
    1-800-767-2775
    Open 6am-6pm EST.
    They might even have a few ideas on how to fix it as well!
    As for “Viruses” I would highly doubt it. Viruses are programs designed to destroy certain parts of computer. Such as, a virus that destroys windows computer, does not do anything to Mac computer. It does not have the same components. The same thing goes for Ipod, PSP, etc. Files my contain viruses in them, but it would not effect the product in most cases. Only if you transfer the file on it to another computer, could it do anything.
    Your problem is, most likely your ipod just broke. Or should I say, just stopped working. Ipod’s are notorious at doing such things. Apple will take care of it. BUT GET THE EXTENDED WARRANTY! That is the only way to make sure they fix it. It is cheaper than buying a $350-$400 new 60 gig Video.
    Good luck my friend, God Life

  • Macbook pro 2010 only will turn on if i hold the power button down for atleast 7 seconds.....before i could just press it and it would come right on

    macbook pro 2010 only will turn on if i hold the power button down for atleast 7 seconds.....before i could just press it and it would come right on

    I tried those already, did not work.
    I did how ever remove the command key and wiped it down and it turns on perfectly!
    but now the keyboard keys seem to be out of place or something. For example it makes a "ping" sound when i hit some of them, when i hit function or control it puts the letter Z.
    Any input would be great!

  • I have several albums in my library that I cannot get onto my device. I have tried manually adding the albums, but it doesn't work. I can view the albums in "Music," but when I click on "iPhone" they are gone. How can I transfer them over?

    Can't add albums in library to iPhone.

    Full question: I have several albums in my library that I cannot get onto my device. I have tried manually adding the albums, but it doesn't work. I can view the albums in "Music," but when I click on "iPhone" they are gone. How can I transfer them over?

  • I just updated my iphone 4 to 5.0.1 and yet i encounter a problem which is that i cannot get to the internet while it always says : you are not subscribed to the cellular data, or it's not been activated. Please help me my carrier is AT

    I just updated my iphone 4 to 5.0.1 and yet i encounter a problem which is that i cannot get to the internet while it always says : you are not subscribed to the cellular data, or it's not been activated. Please help me my carrier is AT

    Check to make sure cellular data is not disabled in settings. If it's on, try re-setting the phone. If that doesn't fix it, call AT&T.

  • Hİ My ipad's screen is black. When it  take charge, I can hear sound but still black. I press and hold both the sleep and home buttons for about 10 to 15 seconds but this doesn't work. Screen still black! PLS HELP ME!

    Hİ
    My ipad's screen is black. When it  take charge, I can hear sound but still black. I press and hold both the sleep and home buttons for about 10 to 15 seconds but this doesn't work. Screen still black! PLS HELP ME!

    How long did you let it charge? It may take 30 minutes before the iPad responds when the battery is completely drained. Let it charge for at least 30 minute using the wall charger. Then rest the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
    If the iPad restarts let it continue to charge until the battery is 100%.
    If the iPad still does not start make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Hello. I dropped my ipad first gen from my chair, about 2 feet above the floor. The screen went black and I can't turn it on again. I have tried holding both buttons down at the same time, but nothing happens. Any help?

    Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?

    You will probably have to contact Apple for repair but before you do try this:
    Turn your iPad upside down on your lap and give it a hard smack on the back.

  • I have a Mac OS X and a Sony HDR-CX7 camcorder.  When I get onto the sony webpage to download program to import movies onto my Mac, they only have downloads for Windows.  How can I get a program for my Mac?

    I have a Mac Os X and a Sony HDR-CX7 camcorder.  When I get onto the Sony webpage to download the program so I can import my movies, they only have programs Windows.  How do I get this for my Mac.

    You shouldn't need any application except what you already have: iMovie, iDVD, iPhoto....
    To check on compatibility with your model camcorder, check these out:
    https://support.apple.com/kb/HT3290
    http://support.apple.com/kb/TS3356
    Some formats are not readable by the above; you can use something like MPEG Streamclip to convert the footage or Quicktime Pro (as mentioned in one of the articles).

  • TS3274 My ipad wont switch on when i hold both buttons down. I have tried charging and nothing happens. Ive only had it from brand new for 1 month

    My ipad wont switch on when i hold both buttons down. I have tried charging and nothing happens. Ive only had it from brand new for 1 month

    Hi there tjgem1982,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W.

  • I updated to Muse CC (2014.2) recently, but this morning it appeared in my Creative Cloud menu as needing to be updated again. Is that a minor upgrade with the exact same name?

    I updated to Muse CC (2014.2) recently, but this morning it appeared in my Creative Cloud menu as needing to be updated again. Is that a minor upgrade with the exact same name?

    The update is for few bug fixes and will show 2014.2 in CC as the update includes hotfix : Release notes | Adobe Muse CC
    For exact version details you can check about muse from Muse menu options.
    Thanks,
    Sanjit

Maybe you are looking for