My iphone 3g,ipad1,ipad2 when connect i tune freezes

when ever i connect my ipnone 3g,ipad1 and ipad 2 the itune freezes. if i unplug the ios gadget then i tune is ok. i downloaded the new version of itunes and follow all the trouble shootting procedures. my laptop operating system is windows 7 64 bit. if any one can give any idea to solve this problem i will be thankfull.
KUMAR

sounds like the phone was previously jailbroken.  It will never work again.

Similar Messages

  • My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported"

    My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
    This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
    The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
    What I can do to fix this problem? Thank you.

    I would try using another cable you can likely borrow one to test from somebody
    if it's the same then likely the connector in your iphone have been damaged

  • Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

    pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

    Dear Valued Pioneer Customer:
    We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device.  If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
    This firmware update may be used only with the following 2012 Pioneer products:
    CD Receivers
    DVD Receivers
    DEH-P8400BH
    DEH-P9400BH
    DEH-80PRS
    AVH-P2400BT
    AVH-P3400BH
    AVH-P4400BH
    AVH-P8400BH
    In order to perform this update, the following items are needed:
    A Pioneer CD or DVD Receiver above with built-in Bluetooth
    Laptop with built-in Bluetooth running Windows® 7
    Bluetooth firmware update (HW05-SW01.27.20)
    How to Obtain the Free Firmware Update
    1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
    2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
    You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
    How to Determine if the Firware Update has Already been Installed
    CD Receivers:
    • With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
    DVD Receivers:
    • With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
    If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
    Questions
    If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
    Sincerely,
    Pioneer Electronics (USA) Inc.

  • TS3219 my ipad2 when connected to my laptop is not responding nor accepting the connection

    my ipad2 when connected to my laptop is not responding nor accepting the connection. My ipad was blocked to  return  to main menu while trying to updating  its IOS. How can we return to main menu?

    Take it to Apple

  • My iPhone shows error -50 when connect to iTunes

    my iPhone shows error -50 when connect to iTunes. What can i do?  What does it mean?

    http://support.apple.com/kb/TS1583

  • My iphone won't synch when connected

    My iPhone will not synch when connected to my iMac.  It just started happening.  It an iPhone 5, all apps and software are up to date.
    Thanks
    jim

    I a;ready take off the acces of the computer and reput it

  • My iphone wont turn on when connected to a laptop or pc,but when its connected to my dock, its shows it need restoration what should i do?

    my iphone wont turn on when connected to a laptop or pc,but when its connected to my charging stereo,its shows i need to conect to itunes but then after 10-15 min. it turns off.

    Hi Monzairita,
    Thanks for visiting Apple Support Communities.
    If your iPhone only powers on when connected to a dock, and shows the "connect to iTunes" screen, start with these troubleshooting steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Best Regards,
    Jeremy

  • Iphone not auto syncing when connected

    i have the auto sync when connected option enabled on itunes, but when i plug my phone in, nothing happens.
    when i launch itunes, then dis- and reconnect the phone, it's fine and syncs everything. ideas? this just started happening.

    I've always had to open iTunes, then plug in phone for it to see it. I've never been able to just plug in my iPhone and watch iTunes get pulled up automatically like with my iPod. I just figured this is normal.

  • Video playback is always low quality on my iPhone 6 plus, even when connected to wifi

    I Have Searched and couldn't find any answers. Everytime I play any video from any source the playback quality is terribly low. 240p would be my guess if not lower. It happens when connected to wifi or lte. It won't buffer to eventually stream in hd or 480p even. I've tried a restore, tried downloading a third party YouTube app and still no luck. The only succes that I've d is when streaming from twitch, I will get hd quality. Please help. Thanks!

    I also happen to have T-Mobile, but the problem happened on WiFi as well as you mentioned and therefore didn't seem to be related to carrier.
    I expect your videos are playing normally again like mine since yesterday morning. I guess it had something to do with the video codecs/standards being used by major video service providers like you thought, but I found it curious that so many different video sources beyond YouTube caused me the same problem during that time. I did find that Daily Motion worked fine when the other services weren't working, so I knew it had to be service (and what standards they were using) specific.
    Still, how were there not tons and tons of other people experiencing this!? I had it happen on both my 6+ and my iPhone 4. Maybe there were other factors specific to my area/connection (outside of connection speed which was always fine) that resulted in it, but still...

  • Iphone has wiped and when connecting to PC it says no sim inserted..Help???

    help with Iphone that has wiped and says no sim when connected to itunes??

    iOS: Device not recognized in iTunes for Windows

  • IPhone GPS location incorrect when connected to home wireless network

    Hi all,
    My iPhone GPS works well except when I am at home and connect to my wireless network. It always gives the same incorrect location about 3km away from my house. When I turn wireless off then the phone gives my correct location.
    I think it is somehow getting confused when connecting to my airport. (I wonder if it is showing the location of the local telephone exchange?)
    Has anyone else encountered this problem or found a solution? Or can I somehow tell my airport where it is?
    Thanks!

    A company called Skyhook Wireless maps WiFi and cell tower locations it scans. Apple uses this to help your GPS locate itself quicker. Here's how it works: http://www.skyhookwireless.com/inaction/apple.php
    If your WiFi has not been scanned properly, you can submit a WiFi location update by going here: http://www.skyhookwireless.com/howitworks/submit_ap.php

  • My iPhone will only operate when connected to the PC, 2 minutes max after I disconnect it, the screen reverts to black with the apple logo and then completely black.  Restoring makes no difference; any ideas anyone? en

    my iPhone fell on the floor yesterday;  now it will ony operate when connected to the PC - then it works fine.  If I disconnect it from the PC, the screen reverts to black with the apple logo, eventually completely black;  iPhone is unresponsive until reconnected to PC.  Any ideas anyone?

    You broke it.
    It's time to find yourself a competent 3rd party repair shop or just buy a new phone. I believe you can get an out of warranty replacement from Apple for $149 (not absolutely positive they still offer them for the 3G), but given the age of the phone and the cost, a new one might make more sense.

  • IPhone speaker volume changes when connected to apple tv

    If anyone has had this problem as well I would be interested but when I first got my iPhone 4S I realized it was loud. After disconnecting from the apple tv my max volume is lower. When I reconnect to the apple tv (by using it to play music from my phone) the my volume is louder again. Is this a bug or just my phone. Lol. And yes my volume is maxed out in both situations. It's almost like the speakers get boosted when connected to a different audio source.

    You would need to connect the speakers to the apple tv if that is where the video is playing.

  • Iphone turns on only when connected to a wall charger and shows that the batterry is 100% charged

    My iphone 4 is not turning on using the power button, when i press it nothing happens but when i connect my iphone to a wall charger the apple logo appears and after some time it says "connect to itunes" and "slide to unlock bar" appears at the bottom for emmergency calls and if i unplug the charger the screen goes black. When i connect iphone to my computer the iphone logo comes in and stays there for about 10 seconds and then the screen goes all black and this thing repeats as long as my iphone is connected to the computer. I have tried the hard reset (pressing home button and power button simultaniously) but its useless in this case
    I think this is because my battery is totally dead and  need to relace it but if anyone of you knows and think that theres some other problem then please let me know
    when it is connected to a wall charger it says that the iphone is 100% charged but i cannot use the iphone as the itunes logo and emergency slide to unlock bar appears on the lockscreen also no service with no wifi nothing its stuck there i can only turn off my iphone using the top sleep button
    iPhone 4

    So the iPod only powers on when connected to an external power source such as a USB port on your PC or Mac or when connected to a wall charger?  If so, that is a very good indication that your iPod's battery is shot and in need of replacement.
    Apple can swap it out for a flat fee or you can send it to a third party repair service for a bit less.
    B-rock

  • My iphone 5 gets stuck when connected

    Hello,
    I have the same problem when connecting my iPhone 5
    IOS 7.1.2
    and my ipod touch.
    I never had any issue connecting and manually upload or delete music with iTunes.
    Both players not get iTunes stuck once connected to my macbook pro.
    I have installed windows parallel, but this problem happens regardless windows is on use.
    Any solution to this? The software is updated.
    Thanks

    You will need to bring the iPhone and cable to Apple for inspection. Only after they inspect it will anyone be able to determine if this will be covered by warranty.
    Generally damage is not covered by the warranty only materials and workmanship.
    Allan

Maybe you are looking for

  • PCI Fast Ethernet Controller v2.13 error

    Came home the other day to my screen repeating the following over and over again: For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM Intel UNDI, PXE-2.0 (buil

  • Can't locate song issue

    I Recently had a problem with my iTunes, the problem being that it wouldn't open when i clicked on the shortcut or tried opening it from start menu. I went: control panel > programs > selected iTunes > repair. To see if that would fix it, it didn't s

  • New page ignored when adding Application type items

    Is it a bug or a feature? When I add an item of type "Application type" and I enter "Link That Displays Item In New Browser Window" the application is still opened in the window with the folder. Using Portal 3.0.8 ....

  • Oil Paint Filter "unknown graphics processor error"

    When I try to use the Oil Paint filter in Photoshop, I get this error message: "The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software." I hav

  • Pop Ups from Presentations

    Why does ALBPM not allow POP-UPS from presentations. I tried displaying a message using the DISPLAY statement inside of a presentation when a user clicks SUBMIT, the method is invoked. But since this was a pop-up, ALBPM gave me a Component Execution