My iphone 4 screen just turned off and now won't turn back on

i was using my phone like usual then opened an app but the screen went to the homepage and my apps had an x on them like i was going to delete them. i pressed the sleep button to see if it would stop but my phone wouldn't turn back on. the screen is dark like it is off but i can still hear notifications when i get them and also put my phone on vibrate. how can i fix this? i have ios 7 and it wont show up on itunes when i plug it into my computer.

Ok, I've tried to plug it back in, and when the plug reaches a certain point, it pops sorta.  Which tells me that it's the psu unit that's gone.  This puter is only 2 years old.  I've already had to send it in for a complete hard disk die, now this.  It's a Touchsmart IQ770.  Yes, made the mistake of getting one of the first ones.  Not only that, it's Vista all the way.  So, this computer is screwed both ways all the way.  When it works, it's wonderful, but since it only works half the time, it's definitely not worth the money, time, headaches or worry that it entails to have.  It's an expensive piece of @#*(!!!!)  I do want to thank the people who tried to help me, sorta.  Just put this into the next inquiry of the IQ770, It sucks!!!!  Big green donkey dicks!!!  Vista made it worse!!!

Similar Messages

  • My Iphone 4 just shut off and now will not turn back on.

    My Iphone 4 just shut off and now will not turn back on. I was listening to music, it started to make a static sound then shut off and will not turn back on. What do I do?

    Battery dead?
    Plug it into the charger that came with the iPhone and plug that into a known good wall outlet. Leave it plugged in for 20 minutes. Then while still plugged in reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • MY iPhone turned off and now won't turn back on

    so at first it would keep showing me to slide to show down or cancel
    then would keep turning the light on
    the it turned off and wont turn back on
    i tried (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears) and non is happening ? any ideas

    Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • ZEN Micro won't turn Off and now won't turn

    Hi Everyone, hope you can help me out here.
    I have been using my ZEN micro for about week now and it was at first working fine.
    Then it started not turning off, so i had to pull out the battery.
    This is obviously very annoying, but it got worse over time.
    It now won't turn on unless i switch it about 30-40 times.
    What is going on, is there a way to fix it and is anyone experiencing the same problem?
    Thanks very much,
    Fern

    FernIe, I have the exact same problem, although now my Zen Micro won't turn on at all via the switch.
    My Zen Micro is 5 months old and its only been over the past few weeks I've been having problems. It started with having to hold the switch in the power on position for a least 30 secs and trying it at least 5-0 times before the player would turn on, and having to remove the battery to turn it off. Now, not matter how many times I try the switch or how long i hold it for, the player won't turn on.
    The battery is fully charged and I have never had problems with the headphone jack, and I haven't dropped it or done any damage to it that I think could be causing it. I'm having to turn it on by plugging it into my computer through the USB cable and then unlpugging it once its on, it's a pain doing this and means if I want to use it later I have to keep it on, muted, in my bag all day with the lock turned on (that end of the switch works) then once its turned off I can't turn it on again until I get near a computer again.
    I've searched the discussions and knowledge base but haven't found an answer. I've just emailed the support team and I'm waiting for their response, would be interested to know what they've told you.
    Just letting you know your not alone and I feel your pain!
    Jen

  • Computer just turned off and now won't turn back on!!

    I have an IQ770 Touchsmart and while I was out of the room, it turned itself off.  Now it won't even turn back on!!!  I've unplugged and replugged and it won't do anything.  What could have caused it?  There was no power interruption, it's plugged into a power surge protector, my other desktop is working fine.  I've been working on it all day, and now it's dead!  What do I do?  Can anyone help me?
    Thanks!!!

    Ok, I've tried to plug it back in, and when the plug reaches a certain point, it pops sorta.  Which tells me that it's the psu unit that's gone.  This puter is only 2 years old.  I've already had to send it in for a complete hard disk die, now this.  It's a Touchsmart IQ770.  Yes, made the mistake of getting one of the first ones.  Not only that, it's Vista all the way.  So, this computer is screwed both ways all the way.  When it works, it's wonderful, but since it only works half the time, it's definitely not worth the money, time, headaches or worry that it entails to have.  It's an expensive piece of @#*(!!!!)  I do want to thank the people who tried to help me, sorta.  Just put this into the next inquiry of the IQ770, It sucks!!!!  Big green donkey dicks!!!  Vista made it worse!!!

  • HP Envy 32" monitor screen randomly shuts off and now won't come back one

    So I've had this monitor for about two weeks. Several times it has randomly just went black. The power indicator LED is still showing it's on. My laptop still recognizes that it's connected only when I physically disconnect it from my laptop or unplug the power cord does it disconnect. Right after it happens I try switching to a different input (i had another laptop hooked up to the HDMI) and also pulling up the menu but nothing happens. I try turning it off with the power button or remote, nothing happens. Only after I unplug the power and plug it back in does the display work. ...Until this last time, it went black and no amount of unplugging and plugging back in would get it to work. It still "connects" to my laptop but there's no image, only blackness. I've mainly been using it with my lenovo thinkpad yoga via the onedock pro displayport, but when I try just HDMI with my other laptop I still get nothing. I've also tried unplugging and holding the power button for >1min like another post suggested. Any ideas? I'd hate to have to send it back.

    okay so after a long wait with it being unplugged, I tried it and the display worked. i adjusted a few settings -turned off auto input selection and made DP hot plug always on (not sure what that does, but I thought I'd give it a try). Now instead of it randomly going black it randomly shows a green screen of vertical lines, and I have to unplug and wait forever before it works again. any thoughts?

  • My iPhone 5 was in 50% battery life when it just turned off and it won't turn on and when i plug it to my computer itunes wont recognize it and i cant turn it on

    My iPhone 5 was in 50% battery life when it just turned off and it won't turn on and when i plug it to my computer itunes wont recognize it and i cant turn it on

    try a reset

  • I was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!

    i was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!

    Hello there, RFJA2211.
    The following Knowledge Base article offers up some great troubleshooting steps for unexpected power off of your iOS device:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My one day old MacBook pro just turned off and it won't come back on either through mains or battery power

    My one day old MacBook pro just turned off and it won't come back on either through mains or battery power it's as if the unit is completely dead. Even with the mains plugged in there is no green or orange light to say its charging or full charged. The battery was fully charged anyway seconds before the screen went off.

    When you say no green or orange light are you refering to the little led on the magsafe connector?  That could mean either the charger/cable are bad or the circuitry in the MBP is faulty.  Since this is a brand new MBP best bet is to take it back to an Apple Retail store and have the genius bar staff take a look.  They can determine if it needs to be reparired or replaced.

  • My ipod froze then turned off and now will not turn back on

    my ipod was fully charged and was working perfectly.
    i locked it and when i tried to unlock it my touch screen wouldnt work.
    i tried reseting it by pressing the home button and the power button.
    it started to reboot then froze on the apple logo screen.
    after waiting for twenty minutes or so i tried reseting it again while it was still on the apple logo screen,
    then it turned off and now will not turn back on.
    i have tried plugging it into my computer to see if it would by some miracle turn back on but i have been unsuccessful
    my ipod is my life, if anyone can help me fix it i would greatly appriciate it!!!!!!!!

    See Here first...
    Frozen or unresponsive iPod touch
    If no joy... See here
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked?

    My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, I call apple support and they told me to bring it in but the nearest store is about two hours away. They said I need it to erase my hard drive but I have too many family pics on it.
    would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked on it? I could replace the internal and get an enclosure for the original until I get the pics out of it?
    Please advise, it's like five years of family pics I don't wanna loose them and I am worried.
    Thanks
    Al Florez

    A Brody,
    I really apprecate your very quick respond, Its too late to back up as of now, my hard drive wont load at all so I cannot follow your instruction to back it up. Learn a hard lesson but I will from now on following your link.
    Also my hard drive it is not available to do the free exchange program.
    I read the OWC instruction on how to replace the drive I was just wondering if the 2TB would work on it instead of the 1 TB they offer, I specifically asked for the Seage Barracuda because I had great experiences with it on PCs.
    Again, Thank you

  • I have a iphone 4 and never had problems with it and today the battery was fully charged and it just shut off and now it wont turn on

    so i had a full battery on my iphone and it just shut off and now it will not turn on it has no water damage nothing

    Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).

  • I tried to update the software for my iPhone 4S. It froze, and now won't turn off, or on, or sync.  Any ideas on how to fix this?

    I tried to update the software for my iPhone 4S, 16 GB to the most recent version (8.1?).  I don't know what I was updating from, because I can't access that, but it was whatever was installed on it (I got it about a year ago, so probably 6.something). 
    It froze, and now won't turn off, or on, or sync with my macbook plus, which is what I have always sync'd it to.  (I backed it up and sync'd it right before I tried to update the software.)
    Since it originally froze almost 3 hours ago, it shows a white screen with the apple on it and a line underneath.  When I try to sync with my laptop, it says it needs me to enter a passcode on the phone, which I can't enter because the screen is frozen.  So I'm unable to access the iPhone portion of iTunes.
    I have tried to turn it off, with no luck.  I have tried rebooting my laptop and syncing, but I still get the same result.
    Does anyone know how to fix this?
    I really wanted to wait to update the software, but I was having internet connectivity issues for the past 3 weeks, and Sprint suggested updating the phone's software.
    Thanks in advance for your help!

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • My iMac G5 w/iSight (A1145) randomly shut off and now won't turn back on!!

    I was using it like anyother day and it just turned off. Now it wont turn back on even with switching outlets!! HELP!!

    You probably have a thermal problem.  Try resetting the  SMU  and see if that helps.  Since it's an iSight you can't take it apart to check for defective caps, but you can bring it in to have a tech do it for you.
    Let us know how you make out,

  • My Mac randomly just turned off and now it wont turn back on, the charger light is faintly flashing green and amber?!?!

    My mac randomly turned off last night had some trouble with an uncertified usb cable that I was trying to charge my iphone 5S with but it came up with that message of not being able to charge with this accessory or something so i plugged it into my mac thinking it was my plug to charge my phone then like 5 mins later my mac just randomly turns off and it did have like 90% batt but i still plugged it back in thinking it was just being wierd but then i pressed the power button after it being plugged into my mac and it wouldnt even turn on no fan starts or anything and now the colour of the charger light is very faint and is almost flickering between green and amber, please help me out I dont want to pay loads of money for something that I might be able to fix?!?!?!

    I actually just fixed it.  Here is what to do;
    1. Unplug everything from your computer.
    2. Take off the bottom of your MacBook / Pro / Air.  (There are usually 3 screws that are longer than the rest near the vent, remember where they go.)
    3. Carefully unplug the battery from the logic board.
    4. Wait 10 seconds.
    5. Plug the battery back into the logic board.
    6. Put the bottom cover back on.
    7. Reboot the computer holding the "Option" key.
    It's not exactly what I did but it should work.  If it doesn't work, what I really did was unplug the battery and then plugged my charger into the computer, the fans started spinning and then it shut off again.  Then I plugged the battery back in, put the bottom on (with no screws), and tried booting up again.  The Apple chime played and then the computer shut off.  So I tried booting again holding the "Option" key and it booted up like normal.  I then restarted my computer to make sure it is back to normal and it is.
    Wow what a relief.  I was really scared there for a minute.
    *And for everyones information I was using a Belkin USB cable but it had never done that before.

Maybe you are looking for

  • Blue background when scrolling, nvidia GTX670, 301.64 drivers

    After upgrading video card to Nvidia GTX670 with 301.64 drivers, all firefox windows show a blue background when scrolling. [http://www.flickr.com/photos/78895346@N07/7227064448/ screenshot] The problem goes away if hardware acceleration disabled, bu

  • SAP Netweaver parameter tuning for retail systems.

    Hi Gurus I am working in retail. I want to know if there are specific parameters that you must tune for retail systems, that you not usually tune for other businesses? Info: OS = AIX 5 Database = Oracle 10.2.0.2.0 System = SAP ECC 6.0 Patch level = 7

  • Ethernet sniffer with FPGA

    Does anyone have code to receive Ethernet trames with FPGA decoder?  (like the code on DevZone which includes code for reading and writing RS-232 data.) I would like to build a fast Ethernet sniffer and data decoder Any FPGA code or idea would be app

  • Dynamic internal  tables using field symbols

    Hello, Is it possible to create a dynamic table where the no of fields in the internal table can be created dynamically(using field symbols). Say sometimes internal tables with 10 fields and depending upon the requirement the fields can be dynamicall

  • Whish SDK?

    I have j2sdk 1.4.0. Can I assume there is a difference in package between j2sdk and j2se, because the JDBC is listed as coming with j2se not j2sdk? Either way, I don't believe I have JDBC and I need to get it. I want to connect to MySQL/PostgreSQL th