My iphone 4S 64gb factory unlocked keep freezing when running especially the music and photo app; and it keep rebooting itself after every total battery drain; i'm on ios 5.1

i upgraded to the ios 5.1; and i realized that each time i have a comple battery drain and the phone goes off; when i connect the iphone to charge; it keeps rebooting itself. And the phone freezes when in the middle of applications; i have to stop the app and start it several times before it works; i have an iphone 4S 64gb factory unlocked

At first drain the battery till the iPhone gets off for many times isnt really a good thing read this:
http://www.apple.com/batteries/
after that I think the only way that will help you is restore the iPhone and the bad news are that you should do it without restore a backup after cause you're problem could be saved in the backup of the phone too so you must manually reinstall apps, preferences etc etc

Similar Messages

  • TS3694 Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.

    Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • My iPhone 5 keep rebooting itself after update to iOS 8? My friends iphone 5 is doing it too...already reset the phone and the problem till happen.

    My iPhone 5 keep rebooting itself after update to iOS 8? My friends iphone 5 is doing it too...already reset the phone and the problem till happen.
    What at can I do to fix the problem???

    Hello there, Fernandox26.
    The following Knowledge Base article offers up some great steps for troubleshooting isues with unexpected power issues with your iOS device:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HELP! my ipad 2 keeps rebooting itself after 2 minutes and battery is stuck at 1%. what should I do?

    HELP! my ipad 2 keeps rebooting itself after 2 minutes and battery is stuck at 1%. what should I do?

    Step by step troubleshooting:
    1. Reset
    Hold the Sleep and Home button down until you see the Apple logo
    2. Restore:
    http://support.apple.com/kb/HT1414
    3. Recovery:
    http://support.apple.com/kb/HT1808

  • IPad keeps rebooting itself after updating to iOS 8.3

    Just updated an iPad 3 to iOS 8.3 from iOS 8.2 .  Update took a while to install (over 20 minutes) and then the Apple logo appeared for a bit then the screen went black for about 10  minutes.  The device was fine for a while and then started rebooting itself, hung on the Apple logo for about 10 minutes and now suddenly it came back.  All apps were up to date.  The device had not had any issues prior to the update.  Has anyone else had this issue?
    Thanks!

    No, this is definitely an iOS 8.3 bug, Allen. I have an iPad mini (original, 24/12 old) and an iPhone 5 (not S, 18/12 old). Updated both from 8.2 to 8.3. I keep them and the apps up to date and run a tight ship.
    Since the update, the iPhone has been behaving normally.
    However, starting immediately after the update, the iPad has been rebooting: when you plug it into the power and it goes to sleep, it reboots itself. This NEVER ONCE happened before the 8.3 update -- and I think I started with this iPad on iOS5 or at least 6, with all the updates inbetween. If you want to use it again shortly after plugging it in, you have to wait about five-ten minutes (as other have reported).  So far, it has always rebooted successfully. But you do have to put in your passcode in response to "you have to enter your passcode upon rebooting" message; and tell it to trust your current computer connect once again.
    It just now rebooted itself once again when plugged into the computer USB port, while in the middle of a sync (the screen went to sleep). Not happy about that; potential to damage data.
    I confirm: this NEVER happened before 8.3, and it now reliably happens EVERY TIME I plug the iPad into power and it goes to sleep. I have three power sources (computer USB, individual Apple charger, aftermarket reserve battery charter) and it happens with all of them.
    As far as I can tell, it only reboots itself once per charger-plugin, and doesn't do so again until you unplug it and plug it back in again (somewhat confident, but not 100% sure, of that).
    Hope that helps. The bug needs squashing, and soon.

  • Storm keeps rebooting itself then says low battery

    My BlackBerry keeps rebooting itself at random times. After it reboots, it says it has a low battery. The battery is usually fully charged when it does this. It's annoying when I'm watching a video on YouTube or talking with a friend. I don't know what to do anymore!

    Hi,
    You can try and remove the battery and allow your device to perform a hard reboot.  Next, try to update your PRL by calling *228 and selecting option 2.  Last, you can try to resend your service books.  Go to Email Settings, press the Menu Key and select Service Books the select Resend Service Books.  Hope this helps.
    Doc

  • IPod freezing when scrolling down the music app?

    I own a 3rd Generation iPod touch. I plugged it into my computer as usual, but when I decided to disconnect and start listening to the music I had recently put in, I realized that it wouldn't let me scroll very far. I wanted to listen to the Cream albums I had put in my iPod only to realize that I couldn't get past the A's in the list of artists, and if I attempted to go any farther down, it would freeze and crash the music app. My playlists were also wiped blank on my iPod even though they would appear just fine on iTunes when I'd plug in my iPod again.
    I've tried resetting and restarting the iPod, closing the music app, and so on, but so far nothing seems to have worked. I don't want to end up having to restore my iPod, because I've a lot of music scattered across different computers and it would be a pain, to say the least, to get that and all the saved photos restored again. Is there anything else I can do?
    Thank you,
    Clyste

    No.

  • My ipod freezes when i goto play music or any apps with music any answers for this one?

    ever since update 4.2.1 my ipod has not played music or videos and when i try to play either music or videos it freezes, help me......

    Try:
    - Resetting the iPOd. Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restoring the iPod from backup
    - Restoring the iPod to facttory defaults/new iPod.

  • Is there a way in which i can check if my Iphone 4 is factory unlocked before upgrading

    Is there a way in which i can check if my Iphone 4 is factory unlocked before upgrading
    i have bought it outside of usa and its unlocked till now....will it lock if i upgrade
    i just wana get official word from apple that my iphone is factory unlocked how do i do that
    PLESE APPLE HELP US

    syed waqar wrote:
    if i send all the information to apple cant apple simly tell me that the phone is unlocked
    No. I've given you your answer. Buy from an un-official source, and you take your chances. And yes, if your phone was hacked to unlock it(common from un-official sources), it will be locked back to the carrier it was originally locked to if you update software or restore the phone.

  • HT2527 While syncing my iphone 4s, its saying unable to sync and restore to factory settings. But, My iphone 4s is factory unlocked. If I restore to factory settings will it get locked to the carrier again.

    While syncing my iphone 4s, its saying unable to sync and restore to factory settings. But, My iphone 4s is factory unlocked. If I restore to factory settings will the iphone get locked to the carrier again.

    vamsi Pothugunta wrote:
    While syncing my iphone 4s, its saying unable to sync and restore to factory settings. But, My iphone 4s is factory unlocked. If I restore to factory settings will the iphone get locked to the carrier again.
    It all depends on the definition of "factory unlocked". If the phone was purchased directly from Apple and the receipt says "Unlocked" then updating or restoring it will leave it unlocked (Apple never uses the term "factory unlocked" as there is no such thing; phones are unlocked at activation time). Similarly, if it had been locked to a carrier and the carrier authorized it to be unlocked, and you went through the unlocking steps they provided, it is permanently unlocked.
    Unfortunately, a lot of the phones sold as "factory unlocked" were actually unlocked by hacking in the "factory" in the basement of some shop somewhere. These phones at best will become locked to the original carrier if restored, and in the worst case will be permanently disabled if restored.

  • Hi guys, I have a problem with imessage. My iphone 4S is factory unlocked and i have been using t-mobile carrier. i tried settings - messages - imessage on but there is this 'waiting for activation' thing. Does anyone know how to solve this? Thanks!

    Hi guys, I have a problem with imessage. My iphone 4S is factory unlocked and i have been using t-mobile carrier. i tried settings - messages - imessage on but there is this 'waiting for activation' thing. Does anyone know how to solve this?
    Thanks!

    If you are in the UK:
    Please upgrade your plan to Web n Walk plus. One of our users on T-Mobile UK had this to report back to us:
    T-Mobile UK are in fact port blocking to ensure fair usage on their base Web and Walk Plan. I have upgraded to Web and Walk Plus and as a result the port blocks are lifted and I get a higher data allowance!
    We were also recently contacted by T-Mobile UK, who stated the following:
    Any smart phone (iphone, android etc) that is bought directly from T-Mobile should be automatically provisioned with Web n Walk plus, if customers have bought a handset sim free then they will need to call customer services and get this added. It is free of charge for most price plans (including new plans) but some older plans will generate a charge of £5pm for this.

  • Hi.. i've got problem with my iPhone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold power and home button even reset the network setting but ended with i am not able even to turn the wifi on. does any body can help me out???

    hi..
    i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?

    See this: http://support.apple.com/kb/TS1559
    If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple.

  • HT4972 my iphone 4s is factory unlock, if i update my iphone into 5.1.1 should its lock or what ?

    my iphone 4s is factory unlock, if i update my iphone into 5.1.1 should its lock or what ?

    It it was unlocked by Apple and not by the "factory" in the back room of the store you bought it then updating it will not lock it.

  • HT201699 My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

    My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

    Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work

  • How to check whether my iphone 5 is factory unlocked or not??

    how to check whether my iphone 5 is factory unlocked or not??

    Did you buy it unlocked at full, non-subsidised price?  If not, then it's not unlocked.

Maybe you are looking for

  • How to regain access to public folder items

    Hi All, We have a few public folder items (mainly calendars) for which i (the admin) have no(or limited) access to. In outlook 2010 if i go to the properties of the public calendar i can only see an entry for Administrators for which has the access o

  • Is it possible to print from design view in CS3

    I've got a summary print out / display page for a CF application that I'd like to be able to print out in Design view. DW CS3 only seems to print the code page and I don't want to print from a browser as that will only show the options currently sele

  • I can't watch videos already downloaded what to do?

    I'm using an iPad and I have tried a lot my last update was the 7.2 update

  • On2 VP6 in Premier Pro: CBR default? (only?)

    I'm just beginning to work with Flash video export in Premier Pro CS3. I don't see any option for selecting CBR or VBR output. Does this mean that it is CBR? CBR by default? CBR only? TIA, Carolyn

  • IDVD won't give an option for higher capacity DL discs

    Hello, Using iDVD version 7.1.2 (1158) In the 'Project Info' window, under 'DVD Type:' the only options given are Single Layer 4.2GB or Double-Layer 7.7GB. According to the info, my project is 150 min, 8.21 GB. I'd like to burn a DVD using Memorex DV