My iphone 4s shuts off automatically, and i can't turn it on with just the power button i need to do the "reset" all the time. it's been happening since sunday and today is already tuesday. what is happening?

OS - 6.1.3
After it turns off it gets put into " recovery mode". and even if i do the "restart", i have to do it several times before the phone actually turns on. phone is 1 year and 5 mos old. already tried to restore it but it just keeps on shutting down. can anybody help?

Hi, thank you very much for your reply. No my phone was never been jailbreak-ed. Never been dropped in water or in any wet surface. Dropped on the floor while texting yes, but it was just a one time incident, last year august i can clearly remember, but after that no more (phone still works fine even after.) restored the phone again earlier, but problem still occured. Will try to go to Apple also to ask and have it checked.  Just worried because my phone is already out of warranty. Will keep you posted. Again, thanks. If you have any more advice just let me know. It would mean a lot.
Cheers,
N

Similar Messages

  • I've had a fault with the hard drive on my laptop, it's been replaced and now my iphone and ipod can not sync unpurchased items with itunes. Is there anyway of sorting this without uploading all of my CD's again?

    I've had a fault with the hard drive on my laptop, it's been replaced and now my iphone and ipod can not sync unpurchased items with itunes. Is there anyway of sorting this without uploading all of my CD's again?

    If your CDs are on your iPod/iPhone, they can be recovered from there,see this post:
    https://discussions.apple.com/message/11857427#11857427
    Your problem shows the importance of making backups.

  • HT4718 i accidentally pushed the power button while update on OS X Mountain Lion Update is ongoing... my computer restarted and is not opening... could soembody please help me what to do?

    i accidentally pushed the power button while update on OS X Mountain Lion Update is ongoing... my computer restarted and is not opening... could soembody please help me what to do?

    See Here  >   Recovery and   >  About Lion Recovery.  Also, see the Internet Recovery.

  • My power button is pushed in so I have to wait till it goes to sleep and I can't turn it on with out pressing on the home button. I might need it fixed but I really don't want to have too much on my parents but I was wondering if I could do anything else?

    My power button doesn't work and I don't know what I can do without havin my parents spend a lot of money for the power button but I want to. No if their is any other way for me to fix it without damaging it and doing it carefully and I have an iPod touch 4th generation but I really want it to work again without having my iPod wait to go to sleep and its the white one and my brother says the white one isn't that good so ya... But I just want to know if theirs any other solution to this problem cause I'm getting really annoyed by it. Please help me! Thank you! :)

    - Make an appointment at the Genius Bar of an Apple store and hear what they hae to say. It is free.
    Apple Retail Store - Genius Bar                          
    you can turn on Assistive Touch it adds the Power and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch

  • HT4623 my iphone is shut off automatic and not connecting to computer

    hello

    I am having the same problem! I have an iPhone 4S, and last night before I went to bed I tried to update to IOS 6.1. It was taking a while, I must've fallen asleep while waiting for it to update. I woke up this morning and my phone alarm had not gone off. I looked at my phone screen and it appeared to be off. I held down the "Hold" button, thinking it had turned itself off, and it displayed the Apple logo and then the "Plug into iTunes" screen. I plugged it into my computer, and iTunes said I needed to restore it. I have tried several times, and it won't work. It will go through the process (it takes about 15 minutes), and then as it is finishing, a window will pop-up saying "the iPhone "iPhone" could not be restored". I am worried because it won't restore, and also because my iPhone isn't named "iPhone". It is named something else. Could my iPhone be damaged from the IOS 6.1 update? It was working perfectly normally last night, I have not dropped it or gotten it wet. I am updated to the most recent iTunes update, and Apple's Troubleshooting Tips are not helping at all. Anyone have any ideas?

  • The home button on my itouch was pushed in all the way and now it's stuck. How do I fix this problem?

    My itouch home button has been pushed in all the way. It's stuck and is currently not working. The ipod still works, but everytime I want to change apps I have to turn off my ipod and turn it back on to return to the home screen. How do I fix this problem? Andif I can't fix it, will apple be able to do it?

    Hi Sara,
    I'm sorry that you're having issues with Firefox and Farmville. My first suggestion is to ensure that your plugins are up to date. For instance, Farmville relies on the Flash plugin, and I've noticed that your version is slightly out of date. You can check your plugins on our Plugin Check page: [http://www.mozilla.com/en-US/plugincheck/]
    Also, some add-ons, like CoolIris, require a fair amount of system resources to operate. i love add-ons and wouldn't surf the web without them, but sometimes it's easier to disable all of them and just turn on the ones you use to determine if any of them are the culprit.
    Another way to determine whether or not the problem is with Firefox or your installed add-ons is to create a fresh profile. You can create a new profile alongside your existing one that doesn't have any of your add-ons or bookmarks installed. Don't worry, it doesn't delete any of your existing data and switching between profiles is easy.
    Here's an article on how to do this:
    [https://support.mozilla.com/en-US/kb/Managing%20profiles]
    Your loyalty to Firefox is appreciated, and I hope this helps you with your problems- please reply if you'd like more help.
    -n.

  • I need to make my own apple id because I'm older and don't want to share everything with my family but if I do, how do I get all the music and everything I bought?

    I don't want to share my apple id with my family anymore but I own over 2000 songs and a few other things I bought so would I be able to get them if I got a new apple id?

    You don't. Everythng downloaded with one Apple ID can not be transfered to another Apple ID. So you would need to buy it a second time. This is one of the Pit Falls of the whole Download only model.
    That is why I refuse to buy things like music or movies that are tied to a specific User Name, ID.

  • 5c shut off automatically and wont turn back on

    My iPhone 5c shut off automatically and wont turn back on. I tried to turn it back on and it didn't work, so then, I went to plug it into the charger. It didn't start up or show the apple logo, it just vibrated every five seconds. So after awhile I went on to iTunes and tried to see if I could reset the factory settings, after it attempted to download it said that I needed to type in my password on my phone, but how was I suppose to do that if I can't turn my phone on in the first place??? (By the way, I accidentally dropped it, about five inches off of the ground, about an hour prior to this happening. so I don't know if dropping it had anything to do with it, because it seemed fine after I picked it up.) Help. Really, really, REALLY need it. thanks.

    If a SMC reset does not help, make an appointment at an Apple store genius bar for a free evaluation.
    http://support.apple.com/kb/ht3964
    Ciao.

  • Iphone randomly shut off and won't turn back on!

    My power button has been stuck recently (not a major issue) and my Iphone 4S randomly shut off without any damage or moisture and over half battery life. Plugging it in to the computer or wall doesn't turn it back on.
    I don't know what to do. Any suggestions?

    This is very bad. It is very difficult to deal with problems without power button function. If there is Warranty or AppleCare make Genius reservation or set up service and take or send to Apple for resolution. If no coverage, clean iPhone charging port very well with toothbrush and Isopropyl Alcohol. If still nothing, next would be battery replacement. If still nothing, replacement of the charging port with flex cable and lower mic. And on and on. If you want Apple to handle this, they offer perfect replacement iPhone 4S for $199.

  • My ipad has a black screen and the power button is not working. Help!

    This is the second time my ipad screen has gone black. The power button is not working. I reset the ipad about two weeks ago  when this happened. However, this time I am not able to get itunes to recognize the device. It keeps asking to respond from the ipad (obviously with a black screen that isn't going to happen). Im not sure what to try next...thoughts?

    Have you tried to give it a reset?
    Reset
    Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.

  • HT1446 My Mac book pro black out just so, and the charger show a blinking light after I pressed the power button (green to yellow)

    My Mac book pro black out just so, and the charger show a blinking light after I pressed the power button (green to yellow)

    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • TS1538 I plugged in my iPad into my computer, I did the "hold the power button, then the home button simultaneously" stuff to try to downgrade my iPad. But I forgot that my compiter had a virus, but it was too late. My iPad won't come back on. What do I d

    I plugged in my iPad to my Windows 8 computer via USB- 30 pin iPad 3 connector cable because I wanted to downgrade my iPad for a reason. I did the method where you completely shut off your iPad, hold the power button for 3 seconds, then simultaneously hold down the home button and the power button, etc. I forgot that my computer had a virus that my dad was about to remove, but it was already too late. The apple "boot-up" sign disappeared like right when I released the button, and my iPad wouldn't turn on anymore. It has been about an hour now, and it still doesn't work. Do you guys think that I have any chanceof waking up my iPad ever again?

    What do you mean by "downgrade my iPad for a reason"?  You cannot downgrade an iOS device.
    A virus on the computer should not affect your iPad unless it has been jailbroken, it has no access to the operating system otherwise.
    Clean up the computer, then do a reboot of the iPad by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
    If that does not help, you will have to restore it using the recovery mode, instructions for doing that are found in http://support.apple.com/kb/HT1808.

  • Hi my friend gave me his old Iphone 1 today and its stuck in the apple boot logo. Sometimes it automatically shuts off but about a second later it comes back on. The home button and the power button seem to not be responsive. Im hoping to restore it.. Thx

    Hi my friend gave me his iphone 1 today and its stuck at the apple boot logo. Some times it automatically shuts off but about a second later is comes back on. The home button and the power button seem to not be responsive. Thanks for the help.

    You bought a used iPhone. Amazon is not an authorized supplier of iPhones, nor are any of the 3rd parties that sell iPhones there.
    You can make an appointment at the genius bar and have it looked at.
    If you are very very lucky, it is still under warranty and it wasn't opened or otherwise tampered with before you bought it. In which case, Apple will replace it under warranty.
    If it's not under warranty, they will replace it for $199.
    If it has been opened or tampered with, they won't touch it.

  • How to keep that valve open for certain period of time and shut off automatically

    Hi everyone,
    The objective of the VI is to measure pH and then open acid or base valve based on pH valve. Below is my UNFINISHED VI
    My question is:  if, for example, the  pH is 10, then, the program will open acidic valve for 5 seconds and then shut off automatically. After that, wait for 5 second. this process will go on and on as I use while loop, but I just dont know how to control the valve on for 5sec and off and then wait for 5sec.
    Anyone can help me out?    Thank you very much
    In the picture, please enter those values before running
    P.S The VI is based on previously posted vi by someone who made it 1 yrs ago.
    Attachments:
    project_trial_1_26.vi ‏27 KB
    Capture.JPG ‏79 KB

    1. The reason the valves close immediately is that the Elapsed Time VI does not cause any wait, it only measures the time. So the valves closed within a small fraction of a second of the time they opened.
    2. I modified your VI to wait until the Elapsed Time has ended.  See the "wait" state.  I probably modified some of your other functionality in the process, but this shows one way you could do the timing. 
    3. You do not need any Value property nodes.  They should never be used if the value can be wired directly.
    4. You do not need any sequence structures. Dataflow will determine the order of things occurring.
    5. If you use an enum for the state machine (and it is a good way to name and select states), you should make it a type def. Then when you need to change it as I did to add several states, you only need to change the Type Def in one place and the changes propagate through to every place you used the control or constants derived from it.
    6. I added a Halt state which will close both valves before stopping the program.  When you are controlling a real world process, it is important to consider the start up and shutdown requirements. For example the digital outputs of the USB-6008 default to inputs when the device is first powered up. And, the inputs are pulled high by a 4700 ohm resistor (at least I think I recall that value). Will this open your valves before the program starts running and sets the I/O lines to outputs and forces them low?
    The USB-6008 has rather limited drive on the digital lines. You will probably need a buffer between it and the valve coils.
    PID and PWM are more complicated than I want to get into here.  First, are your valves proportional or on/off? Second, (assuming that they are on/off) how fast can you open and close them without destroying them in the first week? What is their expected lifetime in terms of the number of operations? How fast do you need to be able to change them to keep your pH where you want it?  Are these values compatible?
    Lynn
    Attachments:
    pH State.ctl ‏12 KB
    project_trial_1_28.2.vi ‏66 KB

  • My on/off button sticks and today my iPhone shut off and I can't turn it back on.  Also it isn't even repond when I plug it in.  Any ideas?  Is there some way it can be reset?

    My on/off button sticks and today my iPhone shut off and I can't turn it back on.  Also it isn't even reponding when I plug it in.  Any ideas?  Is there some way it can be reset?

    If the reset does not help, make an appointment at the Apple store.  If your phone is out of warranty and you can't afford what they want, google for local repair services.

Maybe you are looking for