My iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, so it means theres something wrong in my iphone.

my iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, ive just buy it yesterday in Mediamarkt Spain,, so it means theres something wrong between my iphone and the apple tv? please me

Hi jaredfox06,
If I understand the issue correctly, you have recently purchased a used iPhone and you do not see your Apple TV in the control center in order to AirPlay.  To troubleshoot this issue please follow the steps outlined below.
Try these steps first
Make sure that you have the latest software on your iOS device and Apple TV.
Make sure that both devices have Wi-Fi turned on.
On your iOS device, go to Settings > Wi-Fi.
On your Apple TV, go to Settings > General > Network.
If you're trying to use peer-to-peer AirPlay, make sure that both devices have Bluetooth turned on.
On your iOS device, go to Settings > Bluetooth.
On your Apple TV, go to Settings > General > Bluetooth.
     If you don't see AirPlay in Control Center
When an AirPlay-enabled device is available, you'll see AirPlay in Control Center on your iOS device.
If you don't, try these steps:
Restart your iOS device and Apple TV.
Connect both devices to the same Wi-Fi network.
On your iOS device, go to Settings > Wi-Fi.
On your Apple TV, go to Settings > General > Network. If your Apple TV is connected using Ethernet, make sure that it’s plugged in to the router you're using for Wi-Fi.
On your Apple TV, make sure that AirPlay is turned on. Go to Settings > AirPlay.
Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch - Apple Support
Have a good one,
Alex H.

Similar Messages

  • Using Apple TV (3rd gen) as a remote speaker from original Apple TV (1st gen)

    Just got my new Apple TV (3rd gen) - discovered I can't AirPlay to multiple speakers from it like my old Apple TV (1st gen). As a workaround, can I use the old Apple TV just for music, using the new Apple TV as one of its airplay speakers? Can't seem to. The 3rd gen Apple TV doesn't appear on the original apple TVs list of airplay speakers. Any advice appreciated. Thanks.

    Thanks, and thanks for your reply.
    Yes, that does work - from iTunes I can see both apple TVs fine as options in the multiple airplay speakers - I was just really hoping to leave the main computer off and play my music from either the original apple tv's hdd or my iphone.
    Prior to buying the new 3rd gen Apple TV I had been doing that for a while, using the original Apple TV to airplay music to speakers connected to its own optical out and via airplay to an express in the dining room.
    It's odd that I can see both apple TVs and the express from the multiple speakers option from iTunes, but I can only see the express (and itself) from the original apple TV's multiple speakers menu. (Original Apple TV has been updated to latest software.) Maybe it's just too old to know about the new Apple TV.
    Has anyone managed to get an original Apple TV to airplay to multiple speakers where one of those speakers is another Apple TV?

  • Is there something wrong with my iPhone 5?

    Since i've had my iPhone 5 it's been working perfectly until about a month ago.
    Chargers won't last longer than a week. Some have been from Apple, some have been cheep ones.
    Recently, some won't even last more than 2 days. My phone can be on charge for about half an hour and the cables are either too hot to touch or are melting.  The phone is also too hot to touch.
    I don't want to keep buying new chargers if theres a problem with my phones charger slot.

    So why don't you bring the phone to Apple for evaluation?

  • The volume icon sticks on my screen making it hard to read emails, games and such. Also ads feeeze adn I have to continually shut my iphone off and turn it back on to be able to move from advertisement to another screen

    The volume icon stucks on my screen making it hard to read emails, games, etc....also advertisements freeze on my screen so I have to turn the phone off then back on to move to a different screen....any suggestions??

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Turned my iphone 4 off now I turned it on again and stuck on apple logo, after this i put it in recovery mode but it failed and itunes says there is something wrong with my iphone any ideas

    My iphone 4 stuck on the apple logo then it wont work in recovery mode. My iphone then wouldnt work in recovery mode, itunes said there is something wrong with my iphone. On my iphone it says connected to itunes any ideas what could be wrong

    You might have to get it serviced, or visit an Apple Store to get it looked at.
    Apple - Support - Service Answer Center

  • I would like to connect my Apple TV 3rd gen to a projector and not an HD TV (so I can watch movies on the big screen). Are there any decent price compatible projectors? Good quality but not professional! Many thanks

    I would like to connect my Apple TV 3rd gen to a projector and not an HD TV (so I can watch movies on the big screen). Are there any decent price compatible projectors? Good quality but not professional! Many thanks

    Thank you for the answer, I suppose the main thrust of my enquiry is to find out if 65 MBits is my ATV theoretical limit of reception.  If that is the case then I am happy as a Pig in Mud
    I may have allowed myself to become a victim by listening to Fanbois posting elsewhere who always seem to go one better than everyone else. Now I have learnt two things Today; 65Mbit/s = Good enough and only read the apple forums.
    Many Thanks
    Nick

  • Have an iPod touch 4th gen.  It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing.  I have restored via iTunes and reset all the settings.  Any suggestions?

    Have an iPod touch 4th gen.  It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing.  I have restored via iTunes and reset all the settings.  Any suggestions?

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • My friend gave my a jailbroken ipod touch with ios 8 and I accidently reset it and no the apple logo appears an the loading icon but that is pretty much it.. it wont to nothing more... and thing i can do to fix it??

    my friend gave my a jailbroken ipod touch with ios 8 and I accidently reset it and the apple logo appears and the loading icon but that is pretty much it.. it wont to nothing more... anything thing i can do to fix it??

    You can't get help here if it is jailbroken.
    Pete

  • Apple TV 3rd Gen no longer sees Airport Express 1st gen in Airplay after update

    Apple TV 3rd gen was connected to AirPort Express 1st gen via WiFi, drove a video device via HDMI
    and sent audio to the AirPort using Airplay and selecting the AirPort Express under Speakers.
    I could adjust the volume with the AppleTV remote.
    Apple TV was stored unused for a while.
    After powering on yesterday, I ran the update.
    Now Apple TV is connected to the Airport Express via WiFi
    but Airport Express doesn't show in AirPlay settings.
    I can still use AirPlay from my MacBook running Snow Leopard.
    There are no updates available for the AirPort

    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • There's something wrong with my iphone 4s

    So there's something wrong with my iPhone 4s.
    Just recently it worked fine and all of a sudden it started going insane so what I did was turn my phone off for five minutes then back on. When I did my imessage won't work nor does my app called Line won't allow me to log in claiming my network is not working properly (when in fact it is because I used safari and searched five websites and it works fine) then I tried my imessage and it still won't work so I went to my settings and when I did it said my imessage was off so I switched it on and it was asking for my apple ID and I gave the correct information, making sure to type the password slowly so I won't make errors but still it claims I have the wrong password. I have other apple IDs and I used them and they all have the same password and still nothing. It's really annoying and I want it to be fixed soon because I've tried everything, I've tried putting it on airplane mode then putting it off, turning off imessage and restarting then turning it on again, I can't even log on to my apple ID here properly a few seconds ago and I restarted my phone already and shut it off too and still no difference.
    I'm hoping someone who can help me, please  nothing that requires deleting files because my files are important I do remember backing up on iCloud but I'm not quite sure when I did that and so I'm afraid of using that back up file.

    Hi Rsh Ahmed,
    Thanks for visiting Apple Support Communities.
    If you're not able to connect to wi-fi networks after updating, try the steps in our wi-fi troubleshooting article:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    All the best,
    Jeremy

  • Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps Internet

    Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps internet connection.

    Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
    I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
    Playing light, locally hosted steam sidescrollers  like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
    Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
    It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
    Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

  • I have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck

  • Photo Sharing not showing all photos via Apple TV 3rd Gen

    Hi
    Have Apple TV, 3rd gen, latest update of the software. Running 10.8.5 on a mid 2009 MacBookPro. When I select a few smart albums from iPhoto 09 (v. 8.1.2) and then select those albums to share/stream to my Apple TV via iTunes (11.1.3) only a few of the photos show up; in the 3 albums I have selected to share/stream there are in excess of 500 photos. However, when I have my photos selected as the slideshow/screensaver in my Apple TV, only a few photos show up, less than 100, and then the slide show starts to repeat itself.
    Any ideas why it's not showing every photo in the albums I have selected to stream/share?
    Thanks, and Merry Christmas!
    David

    Are you mixing slideshows and screen savers up, screen savers won't show all the photos in a large collection.

  • My ipod touch is disabled and it says to connect to itunes but itunes says it can't sync since it is locked.  How can I unlock it and get all my data back?  (apps, profiles, gaming levels.)

    My ipod touch is disabled and it says to connect to itunes but itunes says it can't sync because it is locked.  Any way to unlock and keep data?  (apps, gaming levels, music).

    Hi,
    Take it to you nearest Apple Store and see what they have to say. You should back up you data before you go in but in your case you can not.
    xxmitchxx90

  • I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes W7/64 or a known hardware issue?

    I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes and W7/64 or a known hardware issue?
    Example-CD : "Tracy Chapman , Telling stories" is not able to import . I have more such negative cases. But in other cases it works fine and the sound is great.
    The firmware at the inbuild CD/DVD DS-6E2SH is the latest version.
    What can I do??

    hi b noir,
    I don't no about virtuel drives like you mententioned. In the mean time I have rebooted the XPS and run again the iTunes diagnostics. I think the back - chance in the registry was not ready to use.  Now there are another results. They are the same in case of a running CD or a not running CD. The difference in total is like before. It takes more time that iTunes reads the (bad) CD and at the there is no good sound. In both cases ( running or not running CD) iTunes diagnostics gives as a result :
    (the copie from ITunes shows the result of the not running CD from Tracy Chapman)
    Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
    Dell Inc. Dell System XPS L502X
    iTunes 10.3.1.55
    QuickTime 7.6.9
    FairPlay 1.11.17
    Apple Application Support 1.5.2
    iPod Updater-Bibliothek 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.0.25
    Apple Mobile Device Treiber 1.55.0.0
    Bonjour 2.0.5.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes-Seriennummer 00D7B2B00CD25750
    Aktueller Benutzer ist kein Administrator.
    Aktuelles Datum und Uhrzeit sind 2011-06-11 19:33:22.
    iTunes befindet sich nicht im abgesicherten Modus.
    WebKit Accelerated Compositing ist aktiviert.
    HDCP wird unterstützt.
    Core Media wird unterstützt.
    Info zu Video-Anzeige
    NVIDIA, NVIDIA GeForce GT 540M
    Intel Corporation, Intel(R) HD Graphics Family
    **** Info für externe Plug-Ins ****
    Keine externen Plug-Ins installiert.
    iPodService 10.3.1.55 (x64) arbeitet zurzeit.
    iTunesHelper 10.3.1.55 arbeitet zurzeit.
    Apple Mobile Device service 3.3.0.0 arbeitet zurzeit.
    **** CD/DVD-Laufwerkstests****
    LowerFilters: PxHlpa64 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    D: PLDS DVDRWBD DS-6E2SH, Rev CD11
    Audio-CD im Laufwerk
    11 Titel auf der CD gefunden, Spieldauer: 42:07 auf Audio-CD
    Titel 1, Startzeit: 00:02:00
    Titel 2, Startzeit: 03:59:47
    Titel 3, Startzeit: 07:19:27
    Titel 4, Startzeit: 11:31:30
    Titel 5, Startzeit: 15:31:50
    Titel 6, Startzeit: 20:07:50
    Titel 7, Startzeit: 24:27:15
    Titel 8, Startzeit: 27:49:10
    Titel 9, Startzeit: 32:41:25
    Titel 10, Startzeit: 35:29:65
    Titel 11, Startzeit: 38:38:00
    Audio-CD erfolgreich gelesen (Suche nach alter Firmware).
    Laufwerksgeschwindigkeit erfolgreich erkannt
    Die CDR-Geschwindigkeiten des Laufwerks sind:  4 10 16 24
    Die CDRW-Geschwindigkeiten des Laufwerks sind:  4
    Die DVDR-Geschwindigkeiten des Laufwerks sind:  4
    Die DVDRW-Geschwindigkeiten des Laufwerks sind:  4
    After starting the import it is going slower and slower. If it is helpful I can send you a soundfile with these distortions.
    best regards
    tcgerd

Maybe you are looking for

  • Maximum number of files in a folder ?

    Hello, what is the maximum number of files in a folder OS X can handle ? I used a file recovery software called FileSalvage to save some files of an external 300GB with a corrupted disk directory (unable to repair with the usual repair/recovery progr

  • HTTP error 403 to Integration engine

    Hello, Problem a) While posing data from eSourcing to PI box by HTTP , we are getting HTTPerror 403. The error message states: ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code:

  • Add Hardware Inventory Classes - ClientSDK

    Hi, I'm trying to add a new Hardware Class to SCCM 2012 but keep hitting an issue. The actual WMI class I'm trying to add is "CCM_Application" within "root\ccm\clientSDK". I can add the Hardware class by connecting to a remote client (via the connect

  • Re: Bluetooth Related Issues with Car kits regarding the Palm Pre Post 1.2.1

    Make/Model:  Nissan Maxima Year:  2007 Carkit Model info (Manufacturer, firmware version, etc):  OEM with Nav Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)  Since updating to webOS 1.3.5, the connect an

  • Java multi-thread Applet and Multi-processor

    Hello, I have a JAVA applet which work fine on a mono-processeur machine and not fine at all on multi-processors. It use multi thread (for reading on socket) and some times, request are lost. Is that a matter of programming or a JVM bug ? This happen