My iphone 5 display has been cracked and not charging too. I cant even power on my phone. I have applecare too. what the best I could do regarding this matter. I live Australia
My iphone 5 display has been cracked and not charging too. I cant even power on my phone. I have applecare too. what the best I could do regarding this matter?
I live in Australia.
well my display was cracked like ages ago.. I don realy care about my display. so wud I be able to replace my iphone due to battery problem? cause I have apple care..
Thanks for helping..
Similar Messages
-
My MacBok Pro suddenly magnified the desktop display significanlty. All programmes and applications are similarly magnified when open. I tried zooming out using Ctrl - and I also tried holding down the Option key and scrolling down using the mouse. Nothing happens to zoom out of the desktop and on Facebook for example the columns get smaller but the text doesn't so lines of text end up overlayed each other. What can I do to remedy the situation?
Found the Option key. Googled it. And yes your instructions worked a treat. Thanks
-
My iphone 5 screen has been cracked. Black Screen. Constant beeping.
My iphone 5 screen has been cracked for a few weeks but worked fine. Yesterday the screen went black but Siri still worked. When I plugged it in to charge, it started beeping as if i were constantly unplugging it then plugging it back in. At first the screen would light up even though it was black but now the screen wont light up at all. I ordered a new screen to replace it but now I am thinking that it is more than the screen. I plugged it in to my computer and it doesn't recognize it at all. Use the same cord to plug it back in to the wall and it starts beeping again. Could the screen cause all of this or is it a bigger problem? Please help!
Agree with the comments of FelipeV the crux of the matter is that mpeterson329 abused his phone.
Also agree with the below comment:
Peter GillespieSep 1, 2014 9:18 AM Re: My iphone 5 screen has been cracked. Black Screen. Constant beeping.
in response to mpeterson329
Have you dismantled the iPhone in any way yet ?
<Edited By Host> -
How do i restore my iphone when it has been disabled and cannot be restored through itunes because of the error message that says "The iphone software update server could not be contacted
Have you jailbroken this device? This will make the iPhone not talk to the Software Update Server (that signs and accepts software updates) please refer to the following link? Error 3194, Error 17, or "This device isn't eligible for the requested build"
The iPhone will talk to the software update servers, just need to change the host files, it's a simple process, sorry if you were confused about the wording in to top? -
My iPad mini 3 the screen has been crack and it is still in warranty
My iPad mini 3 the screen has been crack and it is still in warranty
Will apple replace that cracked screen screen with a new one?Sorry, accident is not covered by the warranty.
-
I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is
You cannot download the upgrade to Snow Leopard.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
TS3376 can u turn on iphone if it has been stolen and turned off
wondering if there is any way to yurn i phone 5 on if it has been stolen
No, you cannot turn it on, but you can turn on lost mode via Find My iPhone on icloud.com to get notified when it gets lost or stolen and turned on.
-
Dear Apple,
I just updated my iphone from my laptop using itunes and all my apps, music, photos etc.. were on my mobile. But when the update was finished, my phone did not have all the apps it had on before it had completely restarted and I tried to restore my iphone using my laptop but nothing had changed and all my things that were on my iphone were gone and I have tried to look on websites to get back my photos and everything but there was no answer to my question.
Please help..thankyou
HannahFirst, you don't have to use such a large font setting, most of us can read just fine. Did you backup your phone before doing the update? Did you reload that update after you restored your phone? All apps can be reloaded from the App Store if needed. Have you always used this computer for all of your updates and backups? Your music can be synced from your iTunes library again also. If you did not backup your pictures or videos to your computer, you may have lost them.
-
My iPhone 4s display has color stripes and is faded.
Does anyone know what to do? the bottom half of the display is grayed out and I can't see underneath it.
Restart the device. http://support.apple.com/kb/ht1430
Reset the device. (Same article as above.)
Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem. -
I WANT TO KNOW WHAT TO DO PLZ ANYONE!?!?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price -
My iPhone 4s 32gb has been crashing and turns off and will not charge
My iPhone drains battery very quickly
Just lately crashing furring use of apps
Today switched itself off ... I urged into charge and nothing!
No visual or sound that charging was taking place
About 5 hours later I tried again with charger ... Nothing for a while when I
Pressed on off button it eventually charged then switched on?Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these steps in order until the problem is resolved.
-
Please Help!!! SOmething has been activated and not sure how to get it off
SO somehow by pushing button on the keyboard somewhere it has activated
Basically anything i type or click on, there is a man that comes across the speakers and says everything im doing. If im typing it says exactly what i type if i click on my computer it says my computer..make sense?
I would greatly appreciate anyones help!!!HI and Welcome to Apple Discussions...
If you check the System Preferences/Universal Access and select the Seeing tab.
F5 appears to be the key that turns this on... for future reference.
Carolyn -
any help finding my ipad serial number please
ThanksThese links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom -
Could someone please suggest a program or software which is easy to use and won't confuse the life out of me. I'm not very tech savvy!! Haha *sigh*
The easiest option would to purchase a backup hard drive and store your data there. Hard drives are getting cheaper all the time, and all you have to do is drag and drop. Lots of good choices here, but I've had good luck with the super-reliable G Drive and the Seagate Freeagent Go.
When it comes to transferring the DVD, there are some legal ambiguities to address. Strictly speaking, by strict application of copyright law, it's even illegal to copy content you own. In short, if you purchased a DVD, it can't be copied. However, "fair use" is often used to justify copying content - movies or software - that you've paid for already. That means you'll have to "rip" the DVD. Since powers at Apple are likely to object to fair use arguments, you'd best to investigate the details on your own.
Post here if you have any more questions, or comments, or anything!
Maybe you are looking for
-
System is not accepting commands from autoit
Hi, I've developed an application in autoit. It is for opening an application and sending some key stroke automatically and reading the title of the new windows that comes after sending keystroke. It worked well in windows xp as well as some windows
-
HT2534 I have tried this but it says I do not meet the minimun age requirement. Im 32!
I am trying to set up an itune account without a credit card. I have been in contact with apple customer support and have followed the prompts on this artical which they emailed to me. They said its like an account for children to download free apps.
-
SQL Plus session - "schema.package" has been invalidated on making any chng
Hi I am in the process of testing a stored procedure. Whenever I make changes to the procedure I am executing it from the SQL Plus session. But whenever I make a change to the procedure - i have to close that particular SQL Plus session and open anot
-
I am experiencing choppy playback with converted .flv video file?
I have just reinstalled a fresh copy of Windows XP Pro and then installed CS4. I have updated the suite and tried converting my first .avi file. I was told in a previous post that I should not use K-lite Codec pack with Pr Pro, so I tried using the A
-
Guest Traffic Segregation without using Anchor Controller
Hi I need help in calrifiing , is there any other option avaialble to segregate the guest traffic from CORP on internal WLC itself without using anchor controller ?