My iPhone 5 is disabled and the power button doesn't work. How would I fix it?
My iPhone 5 is disabled and the power button doesn't work. How would I fix it? Please Help
wait it for your iPhone to die then before it turns it plug it into iTunes while holding the home button and it will force it into recovery mode.
will be hard to get the timing right cause u will need to wait for the battery to die and charge up again. Other then that just take it to apple and have them replace the device for a fee.
Similar Messages
-
Hi! I bought my iPhone from USA and the power button doesn't work. I have warranty. I will come to UK soon. I wanna learn; can i benefit my warranty in UK?
The warranty is not and has never been International. Warranty and support are only valid in the country of origin. The only exception is for devices sold in the EU where the EU is treated as one country for warranty and support purposes.
-
How do I fix my ipod?
It is an ipod touch 5th generation. I've had it about a year and the home button doesn't work. Right now it doesn't want to turn on.
-
I have a virgin moble iphone that i found, the power button doesn't work and the phone is saying disabled,what can i do to fix it?
Probably nothing, the phone has a high likelihood of being stolen and if you try to Restore it you will run into Activation Lock. Turn it in to the local authorities.
-
My ipad2 is disabled and my power button is not working, how to reset the passcode?
My ipad2 is disabled and my power button is not working, how to reset the passcode?
Hi, there is no fix for this unfortunately. However you can plug your iPad into iTunes and providing you have made a backup, you can restore from it
you say its disabled, what does the message on the screen say? -
My iphone turned off and i can't turn it on. I tried to turn it on with plugging into charger but it doesn't help. the problem is that the power button doesn't work.
Well, that is going to make it difficult, since the first two steps of user troubleshooting require the use of the power button. I suggest you get that fixed.
-
I tried to find somewhere that services them but? That's itunes for you, and the ipod, itself? I would never recomend ipods for anyone, because there isn't any place for you to get them fixed, I guess that they are just throw away cameras in the same sence, if it doesn't sharge any more, throw it out I guerss?
What does iTunes have to do with it? And where do you live? Do you have any shops that do repairs on small electronics and/or smartphones?
You can always go here: http://www.iresq.com
Or you can do an out-of-warranty replacement with Apple: https://selfsolve.apple.com/agreementWarrantyDynamic.do -
How much is my iPhone 5 worth if the power button doesn't work?
It doesn't have any scratches though.
Try either of these and get an estimate:
http://www.gazelle.com/
https://www.apple.com/recycling/
(I can tell you that gazelle offers me $265.00 for my 32GB iPhone 5, in "flawless" condition and if I get it unlocked by AT&T before I ship it to them). -
??????????
Find a competent repair shop.
There are NO legitimate sources for iPhone parts.
Unfortunately, since you opened it yourself, you are no longer eligible for the $199 out of warranty replacement from Apple. -
I have i phone 4 from verizon and the power button is not working
I have i phone 4 from verizon and the power button isn't working anymore, I bought my i phone 8 months ago.
What options do I have and what should I do ?Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay -
I bought this iphone 3gs off an app. I just want to use it as an ipod. it is sim locked (with two attempts left) and the lock button doesn't work at all. What can I do? I just want to use it as an ipod.
I have also tried everything. I took the sim card out and put it back in again. And I have also left it out. And I have tried connecting it to itunes but I need to unlock. (some of these were suggested by the seller)
Please help me.
imMy guess - and this is completely a guess - is that the SIM in that phone has a PIN that was added to it by the previous owner. Whomever you bought it from didn't bother to check for this (or didn't care) before they got it from the previous owner.
You need to get a new AT&T SIM for that phone - you could even borrow one from a friend if they have one that will fit the phone. You would only need the SIM to activate it.
There is no way to activate an iPhone without a SIM in it, even if you don't plan to use it as anything other than an iPod.
~Lyssa -
My iPhone 4 power button doesn't work, how can I get repair it and how much will cost, want to keep same phone everything works fine not power button not working unable used my phone. My warranty is Expired how much will cost to put it on my phone plan? Thanks!
Hi Julio,
Here's a link for your question:
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Cheers,
GB -
How to reset iphone 5s to factory settings if iphone is disabled and if Home button is not working
how to reset iphone 5s to factory settings if iphone is disabled and if Home button is not working?
Visit an Authorized Apple Service Provider or Apple Store to get it serviced:
iPhone - Contact Support - Apple Support -
I have a white iPhone 4 16gb and the home button doesn't sit flush with my screen, it feels like it has sunk down a little. Warranty expires June 2012 so it is under warranty, Would i be illegible for a replacement? Thanks
No way really for anyone here to give you an answer to that question. You would need to either send it to Apple for evaluation, or take it into the genius bar at a nearby Apple Store and ask them about it. Only an Apple employee could make the call, and they would need to see and handle it to decide.
-
Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?
Has the home button worked in the past, or is this been something that hasn't worked for some time? The only way to reset the device is with the sleep/wake (power) and home buttons together. Without it, you would have to wait until the battery dies and then plug it in to try and reset it. The Home button is used for several user troubleshooting steps. Without it, you cannot perform a reset, put the device into recovery mode, or place it in DFU mode. You need to get the home button repaired.
Maybe you are looking for
-
Can't install Boot Camp 3.0 on Vista 64 partition-why?
I recently installed SL and was trying to upgrade my Boot Camp version to 3.0. When I run the installer (in Vista Home Premium 64), it closes with the message "Boot Camp x64 is not supported on this computer." I don't see why that would be. The Compu
-
Object States panel not working in CS6, please help!
I have InDesign CS6 installed (same license) on my work computer and home computer. The Object States panel works just fine at home. But at work the panel shows up, but it is always blank even though I have an object selected that has a State applied
-
How do i update my computer? or QuickTime Player
hey when i try to play movie off my laptop it says " To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More." what does this mean? does this mean that i have to update my computer? if so ho
-
Best Practices for disabling OWA Junk Email filter org wide
Users created in Exchange Online appear to have the following attributes set by default set-mailboxjunkemailconfiguration "identity" -enabled $true Like most organizations we have a more robust filtering solution and the OWA and Outlook implementatio
-
Problem: - 100% CPU is consuming because of an exe program
Problem: - 100% CPU is consuming because of an exe program Environment: - Operating System : - Windows Server 2008 R2 Datacenter Service Pack 1 Processor : - Intel(R) Xenon(R) CPU E5-2670 v2 @ 2.50 GHz 2.50 GHz Ins