My iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work, my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work
my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work, my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work
Hello there, LaruaGalliers.
The following Knowledge Base article provides some great troubleshooting steps for your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
Battery does not charge
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
iPhone or iPod touch displays the low-battery image and is unresponsive
If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.
You should see this image when iPhone or iPod touch begins to charge:
If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
If the issue persists, follow these troubleshooting steps.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Similar Messages
-
I have a iPod classic 2gb. I haven't used in years and I charged it for 3 hours and it won't turn on and I tried resetting and nothing. I plugged it into iTunes and iTunes doesn't even recognize it. I just have a black screen. PLEASE HELP!!!
I'm sorry it's a nano 2gb silver
-
I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work... Please help me and quick
You need to check out the User Guide here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
-
My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the charger.
Try different USB Cable, try different Charger. Clean iPhone charging port with clean dry toothbrush. If still problem and you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no coverage, most likely it could be battery or charging port assembly that need replacement.
-
i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help
If you are unable to restore your iPhone with iTunes without having to enter the passcode, you will not be able to update your iPhone's backup. You will need to place the iPhone into recovery mode in order to restore the iPhone with iTunes and you can restore from the most recent backup available.
http://support.apple.com/kb/ht1808 -
My iPhone 4s has suddenly stopped making a noise to tell me new emails have arrived, this was after an ugrade to IOS 7.1.2.
It worked fine before and I didnt change anything but it just stopped dinging when I got a new email.
I have checked Settings-Sounds & Settings-Notification Centre and everything looks fine.
It worked ok a couple of weeks ago but not after the latest update - anyone know why?Thanks Lawrence
I omitted to say that it only occurs when the screen is locked - if I'm looking at something on my phone when an sms or email arrives, the phone 'notifies' me with a sound but doesnt do it when its screen is locked. Email messages and sms's (texts) still arrive but I get no sound to tell me they have.
The MUTE swith is in the correct place and I have tried resetting the phone with the Home and Sleep buttons several times, still to no avail.
I have noticed on the forums that many people are suffering or have suffered the same problem but Apple are never forthcoming, of course, -
Several sites have videos that start up whenever you visit whether you want to see them or not ...most are ads. Whenever I go to any site that does this my computer gets to a point that my mouse jumps all over the place and it slows to a point of not being able to use it, I have to go to task manager to stop it ....then it starts right back up when I change the page. It is always the plug -in container and if left to run the memory just goes higher and higher. I would like to just turn it off at this point, it makes my pc pretty much useless. It has something to do with the adobe flash player and I have updated it more than once but still no luck. The guesses look about right about os etc.
First off, seeing that you are running WinXP you would be better off using the older Flash 10.3.183.90 version - aka Shockwave Flash 10.3 r183. The Flash 11.0 and later versions of Flash have a "sandbox" that isn't compatible with WinXP and it doesn't provide any better security than 10.3 r183 has. Adobe kept updating the older 10.3 version specifically for WinXP users until a few months before Microsoft ended support for WinXP, so it isn't even a year old yet.
The other thing to do is to set Adobe Flash to '''Ask to Activate''' in the Addons Manager > Plugins tab, so that Flash won't run until you allow it to run. -
Can I use the IRig to plug in my guitar on my mac book Pro or it just works in ipad, ipod and iphone?
From their website:
Got a Mac? Get an iRig!
Now for the hidden features… if you have a newer Mac computer, you can use the iRig as an audio interface for it. The newer Mac models feature a headphone jack that act as a headphone/microphone input for headsets. This means that you can also use your iRig with your Mac laptop or desktop machine to take advantage of the higher processing power of your machine and you don't need an additional audio interface to use it. Simply plug the iRig into your headphone jack, plug your headphones/line out into your iRig and you've got a fully functioning audio interface for guitar/bass/keyboards, or any other instrument with a ¼" out. Pretty cool. -
My iPad isn't getting connection to internet. It just suddenly stopped! It says it is connected to WiFi but it just keeps spinning and nothing will come up. Have tried rebooting my router and iPad (my other computer is connected just fine).
Try turning WiFi off on the iPad, then reset it again, turn WiFi on again and join your network again if necessary. Or go to Settings>WiFi>Your network name>Forget this network. Reset your iPad and then join your network again. Or - settings>General>Reset>Reset network settings. Reset the iPad, then try to join your network again.
-
I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.
Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling -
not sure where the problem lies but have tried uninstalling itunes and its apps reinstalling latest version but it is the same i can view my iphone as soon as its plugged in via usb when i got to edit music to sync it all appears fine but when i click apply it appears to start syncing for 1sec and then stops with no error messages but my phone remains the same also it wouldn't want to backup either.
so iv tried another pc with itunes and can backup fine but however since updating IOS 7.1 and itunes not letting me backup before i now have lost my apps.
they apper in itunes but it wont sync them back on and my old update from jan can not be found so i checked the directory C:\Users\####\AppData\Roaming\Apple Computer\MobileSync\Backup ---and re added the old backup only to find it wont show it so stuck in same boat Has anyone had this problem and know a solution please help................also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem
-
This just started happening.. I open Itunes and the little round rainbow loading indicator just goes on and doesnt stop.. My itunes wont function.. It gets stuck. Then i have to force quit.. I tried to shut down and restart. also reloaded the latest itune 11.1.3 and it still gets stuck.
i use an external HD and thats fine.. all files are in there. But I have no idea why my itunes app is getting stuck.
Am I the only person this is happening to? What can I do to correct this problem?Hi marlonbnyc!
This article will help provide some basic troubleshooting steps that will serve as a guide for you to resolve this issue:
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. Jam53
Every time I switch on the iPhone, the iTunes icon is displayed together with a USB icon and Emergency call message appears on the screen in many languages. When I touch the i symbol I get the following information IMEI: **** AND ICCID: ****
However, the iphone is visible in the Devices directory in iTunes. I changed my SIM card but still can not be recognized by the iPhone.
<Edited By Host>Do you mean when you say its locked to another carrier other then the one im using, that maybe my insurance sent me an iphone thats for a different network for example orange and not mine which is o2?
-
So just downloaded 5.0 and it deleted all my contacts, how can I get it all back? I already tryed the "Back Up" or "Restore" and it's still blank on my iphone??
You should have been syncing your contacts to your computer regularly. Just sync them back ot the iphone from your computer.
-
Hello All,
I followed the instructions when I plugged in my iPhone 4s to do a backup on my Mac. I was then prompted to update carrier settings by going to Settings>General>About. I did as instructed and nothing was new, even though I was advised to update as soon as I plugged into my Mac for a backup. Does this just mean that it tells all iPhone users to check for any available updates just in case ?Updating carrier settings isn't the same as updating iOS. You don't get any new or different features. It just affects, ostensibly for the better, how your phone connects with your carrier's network.
-
My ipod nano was working fine until i uploaded some new tunes today. It sync properly and once disconnected it just switched off and would not even turn on. I have put it on charge for a few hours but nothing happens, infact the charger is getting hot. Pleaseeeeeeeeeeee help I need my ipod.
The backlight burned out from getting it wet. You will have to replace the screen at a 3rd party shop, buy a screen and replace it yourself, or make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $199 USD.
Maybe you are looking for
-
Possibility to edit datasets, when there is already a maintenance view?
Hello again, is it right that I can modify datasets even when there exists a generated maintenance view for the table? It was usual for me, that in the transaction SE16 don't allow that. Thank you for your answers! Melanie
-
Faces are not available in Contacts
Hi, I am using OS X Yosemite 10.10.1 now with Contacts App(Version 9.0 1499) and iPhoto(Version 9.6 910.29) The problem in the Contacts App is that I can't add photos using faces. When I try to add a picture of someone whose face is already in iPhoto
-
Alt-arrow key to copy in CS2?
It's been a while since I've been able to use Illustrator, and now I have gone from Illustrator 10 to CS2. One feature I used to use all the time was to make copies of paths or objects by clicking alt and an arrow key at the same time. From what I'm
-
Allow to change Tax Amounts in A/R Invoice
Hi Experts I am using Sap B1 2007 . It allows me to change Tax Amount (Tax Amount Distribution Screens) in case of Excise Invoices in A/R Invoice but not in Service Tax Invoices . Why is it so. Thanx
-
Hello there, I'm completely new to Flex, so please bear with me. I'm trying to display a pdf file in Flex. I have the pdf data as a ByteArray (that has been downloaded from a server) and I would like to display it in the Flex application somehow, or