My Iphone no longer syncs with the latest ITunes update. I've uninstalled it and stop and started Apple Mobile Device. How do i get it to sync again?

I am using Windows 8.
I downloaded the latest update from a few days ago 1/22/2014. Now my Iphone isnt being registered by Itunes. The computer recognizes it and it charges the phone.
Message was edited by: JamesBa1

Here is what worked for me:
  My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Similar Messages

  • I can only listen to music in iTunes when i'm connected to the internet. Everything seems to have uploaded onto iCloud - something I didn't sign up for. Happened with the latest iTunes update. Help!

    I can only listen to music in iTunes when i'm connected to the internet. Everything seems to have uploaded onto iCloud - something I didn't sign up for. Happened with the latest iTunes update.
    All of the music is still on my computer, but when I play it through iTunes, it either buffers first (when I'm connected to the internet) or it is greyed out (offline) and I can't listen to it.
    This is beyond annoying. Is there anything I can do to sort this out?
    Cheers.

    Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
    Check out the following KB Articles:  http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer
    http://support.apple.com/kb/HT4527 iTunes: How to move your music to a new computer

  • I tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

    i tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

    Hello bajura007,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have been having a lot of trouble with the latest itunes update and my ipod classic 80Gb i.e. being unable to sync songs, but now i have no files at all on my ipod, it is completely blank when i view it from my computer. I need help, please, anybody.

    As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
    This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    ASUSTeK Computer Inc. K50IJ
    iTunes 11.1.5.5
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 3.0.1
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0038B8600B98D1E0
    Current user is not an administrator.
    The current local date and time is 2014-03-21 16:52:39.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
    **** Device Connectivity Tests ****
    iPodService 11.1.5.5 (x64) is currently running.
    iTunesHelper 11.1.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH9 Family USB Universal Host Controller - 2934.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2935.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2936.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2937.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2938.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2939.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Can not burn CD's with the latest iTunes update

    I accepted the latest iTunes software update and I am now using iTunes 10.5.1.  When I go to burn a Disc, my computer (not just iTunes freezes).  I tried running the diagnostic and it freezes when I select my CD/DVD Drive.  I spoke to a senior tech person at Apple and they indicated that the latest version of iTunes conflicted with GEAR drivers that were installed with other CD burning softwares (I have not downloaded anything new and the GEAR Drivers never conflicted with ITunes b/4 this last update).
    I am running windows 7 on a brand new HP Slimline Pavillion.  I checked with HP and there are no firmware updates for my computer  (nor Optical).
    Will at Apple sent me this link:
    http://www.gearsoftware.com/wiki/index.php?title=GEAR_Powered_Products
    I followed the process, even though it involves going into the registry and deleted the 32 and 64 bit GEAR Driver.  It did not solve the issue!!
    Is anyone else having this problem?  HELP?!?!?!?!? AL

    You can edit them using Get Info.

  • I'm running iTunes Radio on a WinXP PC with a KVM USB switch. With the latest iTunes update, iTunes Radio will no longer continue to stream when I switch to my work PC via the KVM switch. Can this be fixed?

    I use a WinXP machine as a dedicated Music PC. I also have a separate "newer" PC to do work on. Each machine shares a Monitor, keyboard, and mouse through a KVM USB switch. I like to stream iTunes radio by starting iTunes on a selected station, then 'switch' to my work PC so that the Music PC will stream iTunes like a radio station through my Audio sound system. This used to work fine up until the latest update to iTunes. Now, when the Music PC detects the KVM switching to the other PC (basically a system hardware disconnect detection), iTunes will stop. Can I turn this 'hardward detection' issue off in iTunes?

    Check your  i tunes version on the PC.  you need the most recent version. 
    Other potentials -
    try a different usb port,
    try a different cable.

  • Is there a problem with the latest iTunes update?

    After getting the most recent iTunes update my iPhone is no longer recognized by iTunes. When its connected to my computer it charges but you can't see it on iTunes and none of the content can be accessed. I've never had this problem before, and it doesn't happen on my other computer with an older version of iTunes. I've gone through the troubleshooting suggestions for this on the Apple site but nothing seems to work. Is there a problem with the new update? And will it be getting fixed soon?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I synched my iPhone 5, then proceeded with the latest software update.  I received an error message as the phone was restarting that the update could not be completed.  Now iTunes is saying that it detects a device that is in restore mode.  Help!

    Current iTunes message: iTunes has detected an iPhone in recovery mode.  You must restore this iPhone before it can be used with iTunes.

    Thanks, it's working.  I was concerned to restore, as I didn't see my backed-up phone appearing as an option prior to launching the restore.

  • Is there a problem with the latest iTunes update? It doesn't recognise my ipod anymore even after I've reinstalled as suggested. Help!

    latest version iTunes doesn't recognise my ipod

    Take a look at this web page and see if it helps:
    iPod missing in "My Computer" or in iTunes on Windows
    Good luck.

  • Hi, i'm having trouble with syncing my iPod. (after the latest iTunes-update)

    It's a classic, but I have no idea what generation... but it was bought in early 08, and have 80gb. Anyway, it has been working fine all the time, but by the latest iTunes-update, it has stopped working. (mac) Every time I try to connect it with my computer, iTunes says that "this iPod appears to be destroyed, try to restore" (I'm having iTunes in Norwegian, so not sure if this is the direct translation, but hopefully you'll get the picture) - and I try to do this, again and again, but nothing seems to work. I have tried to turn off the computer, put iPod in disc-mode, let the battery run out, give it a two-week break, and now I'm out of guesses on what to do. But no matter what I do it allways appear to have zero songs on it after I am done syncing, and I allways get the "try to restore"-message when i connect it again.
    It's possible that it's just old age or something, but I really want to try everything first, as it seems to be all right otherways. It also works when I connect it with my friend's  PC, but since she has ****** taste of music () it's not an option. I have a MacBook, also from 2008.
    And just to clearify. I have an iPad2, and an old iPod nano (2006) and both works with my computer/iTunes.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • HT4623 I have the latest iTunes software on my iMac mini and now have IOS7 on my iPhone and now I cant sync music from my library either by wifi or by usb?

    I have the latest iTunes software on my iMac mini and now have IOS7 on my iPhone and now I cant sync music from my library either by wifi or by usb? I get song lists that scoll at a million miles an hour but no actual content. What should I do to get my music onto my iphone.

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • ITunes no longer shows my iPhone after I installed the latest iTunes update.

    I agreed to install the latest iTunes update and went through all the steps including rebooting. My phone then asked if I trusted the computer and I clicked "trust". It asked again and I clicked "trust". iTunes never opened automatically and when I opened iTunes, I saw that my iPhone5 was not listed; therefore, I can no longer sync. Then I rebooted my (Windows 7) computer again and experienced the same problems. I moved my phone to a different USB port but experienced the same problems.

    I have an AT&T Uverse email account that keeps saying I have an "incorrect user name or password."
    Perhapse it's the same issue since the Uverse e-mail is through Yahoo.

  • Im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

    im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

    Have you worked through the Troubleshooting iOS and WiFi knowledge base article?  If not, see if there is info in there that might help.
    Is the WiFi greyed out on all WiFi networks or just the one?  If it does this on all then there may be a hardwaer problem that needs attention from the techs at an Apple store genius bar.
    Before that, however, try a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.  That clears a lot of iOS hang ups that occur.

  • HT1491 with the latest Itunes, how do you buy songs appearing in my wish list ? you use to be able to hit the button that said buy, but it's no longer found. thanks

    with the latest Itunes, how do you buy songs appearing in my wish list ? you use to be able to hit the button that said "buy" or "buy all", but it's no longer found. thanks

    http://support.apple.com/kb/PH12295
    or
    http://support.apple.com/kb/PH12503

  • My ipod gen 2 does not sync with the latest itunes

    I reset my ipod gen 2 to factory settings and version 4.2.1 will not sync with the latest iTunes.

    Are you using the USB docking cable that came with that shuffle (it has a mini-dock at the shuffle end)?  The docking cable for the current 4th (and 3rd) gen shuffle fits, but it will not work.  The connector is different.
    When you say, "does not sync with iTunes," do you mean it does appear in iTunes (in the sidebar under DEVICES) but does not sync, or that it does not appear in iTunes at all?

Maybe you are looking for

  • PLEASE  HELP ME..ERROR: JAVA CORRUPT ..

    Hello! I bought a disk called the UnInstaller by McAfee. I had some items I wanted removed off of my computer, but really had no idead exactly what I was doing. I told the disk to make the most availible space on my computer. Well, needless to say, I

  • If I buy an iPhone 4 from Verizon will I be able to get the iOS 5 update in the fall?

    Hi, I am going to to be purchasing an iPhone 4 from Verizon this week and have a question.  I am wondering if I will be able to get the iOS 5 update in the fall? I see that it is compatible with iPhone 3gs and iPhone 4 but want to make sure.  Any hel

  • Mac Pro 2009 Bootcamp problem

    I have a fresh install of the Snow Leopard and I was about to install Windows XP on the bootcamp partition but to my surprise I've got this error: http://content.screencast.com/users/idertkin/folders/Jing/media/64fb8a21-d49c-47 4e-a629-26163daa2ea0/0

  • How to improve performance of select query when primary key is not referred

    Hi, There is a select query where we are unable to refrence primary key of the tables: Since, the the below code is refrensing to vgbel and vgpos fields instead of vbeln and posnr..... the performance is very  slow. select vbeln posnr into (wa-vbeln1

  • Validate ADF UI field as per Oracle Business Rules

    Hi , I have a requirement where the relationship between the various data fields are defined in Oracle Business Rule 11g inside BPM Project.I need to call these rules on ADF screens for data population. Eg, If there are two fields on ADF UI,field1 an