My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?
My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?
have you tried charging the device ?
if so and it still does not work you can try a Forced Recovery..
by holding the HOME button down and plugging it into your computer at the same time..
http://support.apple.com/kb/HT1808
Similar Messages
-
I have legally purchased and downloaded FLAC music files online, but iTunes will not recognise them. I'm working on a PC. Can anybody help, please?
Hi anniepat,
FLAC files do not run on iTunes. See this article for how to convert your FLAC files to iTunes compatible format:
http://www.bigasoft.com/articles/how-to-import-flac-to-itunes.html
Cheers,
GB -
I have purchased a new iPod Nano and have tried repeatedly to set it up but iTunes will not recognise it. I have 5 other devices connected to my itunes account so is this the problem and what can I do?
There is no 5 device limit. There is a 5 computer limit.
Device not detected in iTunes -
I downloaded a audio book from iTunes on my iPad but it will not play, what can I do?
I downloaded a audio book from iTunes on my iPad but it will not play, what can I do?
Swipe your Home page to the far right and do a Search of your audio book.
-
hello.
i have a ipod touch 4 and i have being putting in the correct password for it but it keeps saying it's wrong. now it is telling me to connect to itunes but itunes does not work on my computer.
i need this problem fixed ASAP because i use my ipod for my uni studys..
thank you alice walsh.Place it in recovery mode by:
Placing your device into recovery mode
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
If necessary, open iTunes. You should see the following "recovery mode" alert:
Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes -
I have down loaded nd installed lion but finder will not open what can i do?
have installed lion on my mac but finder will not open, help please?
Try to reset the phone and see if that gets to working again
http://www.hard-reset.com/apple-iphone-hard-reset.html -
I try to open a PDF file but it will not. What can i use to read a PDF file.
What can i use to read a PDF.
1. Install free Adobe Reader App.
2. Hold down attachment and "Open In" Adobe Reader
http://i1224.photobucket.com/albums/ee374/Diavonex/fb20a68a.jpg -
My screen on my iPhone has gone completely blank. I can hear it ringing but am not able to answer it. Any advice?
try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
-
My ipad's screen has gone completely blank. I can't see anything. Have attempted to update and restore it, but to no avail. Does anyone have an idea on how to resolve this issue?
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!
What happens when the iPod is plugged in? anything? any errors?
Why is 50GB of music gone? All music should exist on the computer. Only a fool would rely on a single device which could easily be lost or stolen to store their content on. -
Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?
More info,
I have bootcamp with Windows 7 installed, do I need to run some "Driver compatibility checker" after the Windows 7install?
if so what is the name of it?
thanks -
I downloaded and installed itunes, but itunes will not connect to ;internet (I do have internet. I don't know what too do, can you help?
I'm having the exact same issue. I'm connected to the VPN, but I can't mount or otherwise connect to the shared drive. Did you ever resolve this?
-
when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
i upgraded my iphone os to 4.01 and i have not been able to sync to my computer. The error message I get says the Iphone connected is not recognised what can i do to solve this problem.
Did you try to connect in recovery mode? iOS: Unable to update or restore
Also check here: iOS: Device not recognized in iTunes for Windows
And make sure your security software is set up right: iTunes for Windows: Troubleshooting security software issues -
17" intel iMac screen froze then has gone completely blank. Any ideas?
Hi There,
My 17" intel iMac screen froze then has gone completely blank..
I've done a SMC reset to no avail.
thanks
RichardIf it won't startup in Safe Mode, then try Startup Manager or the Apple Hardware Test from your original Install Disc.
Maybe you are looking for
-
The title says it all... We are running eBusiness Suite 11.5.10.2 in Production on RAC 10gR2 (red hat linux, split application and database tiers). Is there a tried, tested and reliable way to clone from the Production RAC environment to a developmen
-
Logon trigger setting nls_date_format over ridden by sql developer?
Problem: Developers are inserting a Date record into a varchar field. I can't change this process right now. Non-Date info is stored here also. Would require a code change. To simplify this, I wanted to get all the developers to insert using the same
-
ITunes Library does not appear in iDVD
When I open iDVD 6, I don't see my iTunes Library in the Media panel. Actually, I don't see my music library in iPhoto either. How do get other iLife applications to find my library? I tried recreating my iTunes XML file by following these instructio
-
Creating Low Level dll memory drivers
Hi I am looking to perform some memory testing on a couple of Micron memory devices using Labview. On the micron website they provide the drivers to interface to an SPI controller in C files. I saw a tutorial explaining how to build dll libraries w
-
Free beer, if you make this work....
Provided that you come and collect it yourself..... First of all, new to flash, so I have properly made this all wrong First look here What I want to make is a scroller that can scroll movieclips, so I use a scrollPane and adds a empyt MC (a contentH