My iphone was fully charged and now it won't turn on or do anything
My iphone was fully charged and now it won't turn on or do anything
I'm sorry, it seems that the problem is that my phone WON'T restore. I just tried restoring again and it keeps giving me the 2001 error. Help.
Similar Messages
-
what can i do to get my iphone working. its the only phone i have and i need it to work
Hi,
See if this Helps:
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPhone to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPhone in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?
Try here:
iOS: Not responding or does not turn on -
hi, yesterday I was a strange thing happened. my iphone was fully discharged and went out, when I turned there were not any messages. This has never happened to anyone?
Thank you.!thanks KiltedTim.....i hope its new...i brought it new so why would i want a refurbished one.
I think you might be right with them not being out long enough...well here's hoping -
just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now
I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend! -
I dropped my iPhone 4 in water and now it won't turn on at all, will i lose all of my data, for example my photos and messages etc? and is there any way you can back the phone up without having it switched on?
If you had previously been backing up to iCloud (or a computer with iTunes), you would possibly have a backup. That said, if you can't turn the phone on, you cannot create a backup of the device now. Sorry.
-
Put iPhone in docking station and now it won't turn on
I put my iPhone into a docking station which I didn't know had had a drink spilt on it a year or 2 ago. I quickly took it back out but now it won't turn on at all. Even holding the home and lock buttons doesn't do anything. Please help
http://support.apple.com/kb/TS3281
-
Now it won't connect to Wi-Fi and often when I shut it down it shows alit screen for five minutes before it finally shuts down, also my photo album sometimes randomly dissapears and everything is sometimes really slow. WHAT DO I DO????
If the iPod is dry then the iPod is permenently damaged.
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Fix it yourself if you are up to it
iPod Touch Repair – iFixit -
So I charged my phone yesterday but it didn't seem to get charged because the battery percentage went lower instead of higher after I plugged out my phone. Then the battery percentage subsequently got lower even faster, jumping from 28% to 15% within ~a minute. It was very hot too, so maybe overheating was the problem. Then I tried charging my phone again after leaving it to cool but it won't charge and keeps flashing the Apple logo.
I've tried to no use:
1. pressing the Power button and Home button together for a long time
2. restoring my device (on iTunes it says that my phone's updated, but it still won't turn on)
Should I just send my phone to Apple for them to fix it or for a replacement?I'm sorry, it seems that the problem is that my phone WON'T restore. I just tried restoring again and it keeps giving me the 2001 error. Help.
-
My iphone won't turn back on after it fell off the charger. When I plug it back into the charger, the screen with the apple icon pops up and it buzzes and just keeps repeating the same two steps. What can I do? Help!
Try these steps: http://support.apple.com/kb/ts3281
-
hi my phone suddenly turned off, it has a fully charged batterie and i cant turn it back on. Does anyone know what to do?
Tamara Holding both buttons the Power and the Lower Volume is Known as a Power Cycle) In the event that your Razr shuts down and you Try to turn it on and it Doesn't press the power button for 10 sec Let off and then re-peat the process and your Razr should come back on Mine has done this and this is what i done. b33
-
My Magsafe adapter blew while charging and now Macbook won't turn on or charge?
My macbook was completely dead (we just got back from vacation). I plugged it in to charge it with my Magsafe L adapter (that came with my macbook) and turned my macbook on. Within 20 minutes (it was around 40% charged at that point I believe), I heard a "pop" and the computer shut off. Completely. No warning. I felt the L shape and it was HOT. I immediately unplugged the adapter from the wall and the box was just as hot if not hotter. The 2 pronged plug has burn looking marks on the metal, which leads me to believe it blew and is dead. Now my macbook won't turn on. I tried a few troubleshooting things (control-command-power button for 3 seconds and shift-option-p-r-power button) and there was no response.
Am I screwed? Will I even be able to get anything off my macbook?
I purchased it in 2009ish if that helps.If you are in the US or Canada, you could make a Genius appointment
at an Apple Store for a diagnostic check of the computer to see if the
DC-in board (or magsafe board) is still OK.
Or if it was toasted from the power surge or failure of the adapter. If
so, then it would need a service for replacement. Troubleshooting
the charging system may well extend to checking the rest of the
computer hardware, as so much is integrated.
There may be some ideas on repair questions in an appropriate
iFixit guide for MacBooks, online at their site. Not sure if there is
a guide for those power adapters, but had read where repairs had
been attempted by individuals several years ago, posted online.
Hopefully you can reconcile your differences with the MacBook.
Good luck & happy computing! -
HT1459 i tried to restore but there was an error and now ipod won't turn back on
randomly my music wouldn't sunc with my ipod today, so i tried to restore it. however, there was an error during restoring and now my computer won't recognize my ipod and the screen on my ipod keeps going to the "itunes/connecter" picture and it won't so anything else. how do i fix this?
Have you tried resetting the iPod? Hold the home button and wake/sleep button for 10 secs (it can take more). If iTunes won't recognize it anyway, try reinstalling iTunes. Hope can help!
-
I got the Iphone screen protector put on and it was working perfectly before and after. BUT when I went to charge it due to low battery it won't charge or turn on. There is condensation within the camera lens. What is the problem?
The installers use water to get the air bubbles out of the film. Looks like they got a little heavy handed with yours. You warranty is now voided (there are moisture indicators in the phone). You will need the screen protector people to replace your phone.
Since they will likely decline, if you are in the US, threaten to file a claim on their insurance for damaging your property in thier control. -
My iPod 5th gen was working fine and now it won't turn on.
This morning I was listening to music on it and everything, it was working absolutely fine and went to take a shower, so I locked it. When I came back, it would not respond at all. Like it is on the off screen, with nothing on it. I bought it off a friend and the home button is stuck, so I can't put it in recovery mode, and I was going to download a client to do it on a computer, but my personal laptop does not recognize it (it doesn't even come up on the computer usb port thing and it doesn't charge when I plug it into the wall). I just recently purchased the charger (literally in the last week) so I do not believe it is the charger because it was charging fine all night. Also it was at full charge when I went to shower so I honestly have no idea what to do. I looked up solutions but I am unable to do anything when my computer can't even recognize it. Somebody please help me, or at least tell me I'm screwed so I can stop worrying about it This iPod is important to me and I have a lot of valuable data on it so I will be very dissapointed if I cannot continue to use it.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
I'm attempting to export a pdf file to microsoft powerpoint using acrobat plus. I reach the 90% completion level and am told an erroor has occured and the process stops. There is no explanation of the error or description of anything I've done wrong.
-
Problem of Starting Sun Application Server
Hi, I just downloaded j2eesdk-1_4_02_2005Q2-windows.exe to my windows machine and insatlled it. When I started the verifying of Server by going to "Start menu, choose Programs -> Sun Microsystems -> Application Server PE-> Start Default Server", I di
-
Address field ADRN2 empty in the PO
Hi all, we are using EKPO-ADRN2 to get all detail of delivery address to copy that across the PO layout. The thing is for some plant this field is empty. IS anybody know why ? and how to create an ADRN2 number? Thank in advance Cheers Julien
-
When trying to login to iTunes I receive a message iTunes has stopped working. A problem caused the program to stop and iTunes automatically closes.
-
What service do I need to create and combine PDF files?
hola, tengo el adobe Export Pdf, por un año. y sin embargo si quiero unir archivos en un solo Pdf me dice que tengo que registrarme y pagar. así con casi todas opciones que quiero emplear... me gustaría que alguien me explicara que opcines tengo...