My iPhone4 doesn't appear to have "FacTime" (App), yet when I "ring" it from my iPad's FaceTime, I hear a faint ringing tone but nowhere to answer the call? Anyone out there suggest what's wrong? (going to the App Store and searching "FaceTime" brings iPa
My iPhone4 doesn't appear to have "FacTime" (App), yet when I "ring" it from my iPad's FaceTime, I hear a faint ringing tone but nowhere to answer the call? Anyone out there suggest what's wrong? (going to the App Store and searching "FaceTime" brings apps that have icons different to that of my iPads!)
Yeah, I know I can restore it, but I might as well go ahead and try. I just finished a backup for icloud and itunes to make sure, I'll go ahead and restore it and set it up as new and see how that works. Seems like I have no other options at this point, I'd still like to know what they did with the Download tab in itunes store, if they removed it or if I'm just overlooking it.
Similar Messages
-
I just hooked up my Canon MP830 printer/scanner/fax to my MAC and can print but can't scan. Anyone out there know what to do with this?
Have you downloaded the approriate Snow Leopard drivers for that printer? Make sure you get the appropriate and latest MP Navigator, as you start scans from the computer, not the all-in-one. Get them from http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp830#DriversAndSoftware
-
while texting with more than one person at a time the incoming texts scrolls to top of conversation. anyone having this issue?
I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
"How do I text message multiple people at once?"
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
You can ask Apple for iPhone changes via this link:
http://www.apple.com/feedback/iphone.html
Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
(If this has answered your question, please mark your original post as answered) -
When I try to play a song on I-Tunes, I receive the Message "The song can not be used because the original can not be found. Can anyone out there help me with this problem?
The iTunes application saves your iTunes Store purchases--as well as any music, audiobooks, or videos you import--to your computer's hard disk, not the iTunes application itself.
The error message you note indicates that the purchase in question can’t be located where it is stored in your iTunes Music folder in order to play it, and may have been moved or deleted.
You will need to help iTunes locate the file. Follow the steps in this article:
http://support.apple.com/kb/TS1967
This article may also be helpful:
http://support.apple.com/kb/TS1408 -
my ipad 2 repeatedly states there is no memory, but I have no files or pictures? what is wrong? is the memory corrupted? thanks
You probably ran out of working RAM and not storage space.
Suggest you close Apps that you're not using; reboot ipad if necessary. -
I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there. What am I doing wrong?
Motion basically looks at the the source footage and it's timing (in the timing section of the Inspector) when analyzing for tracking. Filters are basically ignored by the tracker. Retiming actions, like time re-mapping, or retiming behaviors that are applied before the tracker should be used by the tracker. Did you change the timing after doing the tracking? If so this would also require you to re-track the shot. Understanding that you found a workaround, describing the effects you applied would help to explain why you ran into problems.
Cheers! -
i do need help. My little i-pod appears to have lost all visuals. when I
connect it to the computer I can see what is there, but I can no longer
play it or see the tiy screen. Does this mean it has died? or is there a
way of resucitating the poor thing.
mkiPod Tutorials
iPod Manuals
iPod Models -
i accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this? my computer also slowed down drastically before it stopped working..thanks! HELP PLEASE!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider. -
Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
I just used it a week ago, before I did the update and it worked perfectly fine.
Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
Thank you!!!Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?
rickeyt
Thanks for the reply. Great news about the volume adjusts.
Now about those fades for the volume. How are you doing that?
1. Right click the Timeline video audio and select Fade and then
see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
Please let us know if any of the above works for you with regard to the audio fades.
Thank you.
ATR -
I'm using osx 10.7.5 and updated VM Fusion, it seems to have thrown windows out of the system.can anyone out there help? Can't get fusion to work.
ellerfrau wrote:
I'm using osx 10.7.5 and updated VM Fusion, it seems to have thrown windows out of the system.can anyone out there help? Can't get fusion to work.
I'd suggest being more specific. What do you mean by "it seems to have thrown windows out of the system?" The Windows virtual machines should still be in the Virtual Machines folder in your documents folder. Are they there? What version of Fusion have you updated from and to?
You might also consider raising your question in the VMware Fusion forum: http://communities.vmware.com/community/vmtn/desktop/fusion?view=discussions&sta rt=0. -
I use a desktop version of Lightroom and am wanting to move to the Cloud version. What happens to my files, etc., on my desktop when I download the cloud version? I don't want to lose my metadata, etc. If anyone out there knows, please let me know.
I just installed LR CC and am having trouble opening catalogs where I followed the instructions to upgrade. Just posted a question about it.
Discovered a problem when I went looking for some images that were not included in the most recent catalog. After opening up a couple of older ones and upgrading, I went back to the most recent and couldn't opening. Message says it is not writable. And also says it may be due to incorrect permissions. If you have any suggestions for this, I would love to hear them. -
I just got a new iphone 5c this is my first smart phone. I have an Ipad so thought it would be easy.
I downloaded the new software don't know if this changed anything. I have only had phone for 4 days
but now the light won't shut off. I have to turn off the phone for it to go out. I did the holding down home
button and start button till apple shows up. I checked to make sure the LED flash for alerts button was off.
I don't know what else to do. Anyone out there have the same problem and have found an answer.
Thank you!After powering the iPhone off and on, the light goes out but turns back on randomly or immediately after powering the iPhone on?
Since nothing else you have tried has resolved it, try restoring the iPhone with iTunes from the iPhone's backup first.
If no change after that, try restoring as a new iPhone or not from the backup.
If no change after that, the iPhone has a hardware problem.
Call AppleCare or make an appointment at an Apple Store if there is one nearby. -
i have moved my sdcard over to my samsung brightside phone,. but the videos can not be read. Is there anyone out there whom may have experienced the same issue? I also tried transferring my files over to my pc first, then reformatted the sdcard, then transferred to the appropriate files back onto the sdcard and put back into samsung.
Thanks for the info SuzyQ. lorsa, the community is correct, pictures and videos can be saved differently on other phones. What phone did you remove the SIM card from? Where did you purchase your SIM card from? Your previous phones SD card and format may not be compatible with your Brightside device. I show you advise that you reformated your memory card but make sure the files are saved correctly. Listed below are the different type of files you can save, receive, and view for pics and videos with your device.
Files that are compatible with the Brightside device:
JPEG (*.jpg, *.jpeg, *.jpe)
BMP (*.bmp)
PNG (*.png)
GIF (*.gif)
3G2 (*.3g2)
3GP (*.3gp)
MPEG4 (*.mpg)
Please let me know if the information above helped with your issue. Please reach out to us if you have any questions or concerns. Make sure you always power cycle periodically. You may also need to peform a hard rest for your phone.
KinquanaH_VZW -
I'm not sure if i am in the right room to ask but, i got a new job and my w-4 is online threw the adobe acrobat reader ans is filled out but it wont connect to the browser to get it submitted. what is wrong?@
I doubt that the W-4 has a submit button. If you are using Reader XI (actually the topic of the Reader forum, not this one), you should be able to save it and then print and deliver. If it is set to be submitted by the browser, then it may be your Reader and the browser are not talking properly. If there is a generic URL that you can provide that has the W-4, we might be able to give you more info. A lot depends on what your particular form looks like. Hand carrying it should always be an option.
Maybe you are looking for
-
Link with Purchase Requisition & Purchase Order
Is there any SAP standard report, where , given a Purchase Requisition, i will get a PO number. Also, let me know the table, where this link is stored.
-
I applied the Extrude / Revolve to text and once it rendered the text Illustrator keeps rendering it, that is, it won't stop. There are two objects, one with a single word and the second object has 4 lines of one word on each line (peoples first/last
-
Available for Aqualogic/oracle bpm project
thanks
-
Put convert anchor points options in Keyboard Shortcuts
I have two objects with the exact same border path and multiple types of points within the border. I believe that the only way to covert two corner points (at the exact same location) into smooth points (and thus maintain the exact same path for both
-
Corrupted iTunes Library Issue - Help!
So I'm running an Intel-based version 10.6. Today I downloaded an Apple Update trying to fix a keyboard issue, and when i restarted found that my iTunes library is gone, save for maybe 400 apparently random songs. I have not lost any of the music its