My iphone5 does not have any sound from the speakers ringtones or music any suggestions?

my iphone 5 does not have any sound from the speakers any suggestions on what culd be the problem and hopefully a fix

Just to add to this I can hear through the small speaker and the headphones it is just the speakers for ringtones and music etc

Similar Messages

My iphone4 does not work in any music devices. There is no sound from the speakers. It charges but no sound.

My iphone4 had worked in all my ihome and any devices that connect to the iphone or ipod. It stopped playing music when I plug it in. It will charge but no sound from the speakers of the device. I still get music through the iphone4 speakers. Any suggestions?

Bring the phone to Apple for evaluation.

I don't hear any sound from my speakers I have tried all trouble shooting

Please can you help me. I don't hear any sound from my speakers, I have done all trouble shooting and they all indicate that speakers are working properly

Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

1. Check the Side Switch
http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
2. Double-click the Home button and swipe to the right and check volume control
http://i1224.photobucket.com/albums/ee374/Diavonex/ea5b842d.jpg
3. Settings>Notification>Game Center>Sound>ON
http://i1224.photobucket.com/albums/ee374/Diavonex/67a15edf.jpg

HT201263 my iphone5 does not have passcode setting option. this is for auto-lock function

my iphone5 does not have passcode setting option. this is for auto-lock function

Hello SLLH
You can find the settings for the Passcode Lock in Settings > General > Passcode Lock. If you are looking for Auto-Lock, then go to Settings > General > Auto-Lock. If you are not seeing these options then you may need to do a reset settings on your iPhone, which is located at General > Settings >Reset > Reset All Settings.
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Thanks for using Apple Support Communities.
Regards,
-Norm G.

The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.

I recently moved from coldfusion 8 to coldfusion 9 but all the pages with cfgrid: is throwing the following error. Any suggestion would be of great help
coldfusion.jsp.JRunTagLibraryInfo$NoSuchAttributeException: The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.
at coldfusion.jsp.JRunTagLibraryInfo.getPropertyType(JRunTagLibraryInfo.java:627)
at coldfusion.jsp.JRunTagLibraryInfo.buildTagInfo(JRunTagLibraryInfo.java:585)
at coldfusion.jsp.JRunTagLibraryInfo.getTag(JRunTagLibraryInfo.java:267)
at coldfusion.compiler.NeoTranslationContext.findTagName(NeoTranslationContext.java:346)
at coldfusion.compiler.NeoTranslationContext.isKnownTag(NeoTranslationContext.java:222)
at coldfusion.compiler.CFMLParserBase.isKnownTagName(CFMLParserBase.java:589)
at coldfusion.compiler.cfml40TokenManager.TokenLexicalActions(cfml40TokenManager.java:6704)
at coldfusion.compiler.cfml40TokenManager.getNextToken(cfml40TokenManager.java:6586)
at coldfusion.compiler.cfml40.getToken(cfml40.java:11879)
at coldfusion.compiler.CFMLParserBase.isTrivialAngleBracket(CFMLParserBase.java:707)
at coldfusion.compiler.cfml40.jj_3_1(cfml40.java:9392)
at coldfusion.compiler.cfml40.jj_3_2(cfml40.java:9460)
at coldfusion.compiler.cfml40.jj_3R_67(cfml40.java:9500)
at coldfusion.compiler.cfml40.jj_3_86(cfml40.java:8147)
at coldfusion.compiler.cfml40.jj_3R_92(cfml40.java:8584)
at coldfusion.compiler.cfml40.jj_3_85(cfml40.java:8641)
at coldfusion.compiler.cfml40.jj_2_85(cfml40.java:7619)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4215)
at coldfusion.compiler.cfml40.cfif(cfml40.java:311)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.cfif(cfml40.java:311)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.cfelse(cfml40.java:442)
at coldfusion.compiler.cfml40.cfelseif(cfml40.java:374)
at coldfusion.compiler.cfml40.cfif(cfml40.java:314)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.start(cfml40.java:4664)
at coldfusion.compiler.NeoTranslator.parsePage(NeoTranslator.java:667)
at coldfusion.compiler.NeoTranslator.parsePage(NeoTranslator.java:648)
at coldfusion.compiler.NeoTranslator.parseAndTransform(NeoTranslator.java:401)
at coldfusion.compiler.NeoTranslator.translateJava(NeoTranslator.java:343)
at coldfusion.compiler.NeoTranslator.translateJava(NeoTranslator.java:144)
at coldfusion.runtime.TemplateClassLoader$TemplateCache$1.fetch(TemplateClassLoader.java:418 )
at coldfusion.util.LruCache.get(LruCache.java:180)
at coldfusion.runtime.TemplateClassLoader$TemplateCache.fetchSerial(TemplateClassLoader.java :362)
at coldfusion.util.AbstractCache.fetch(AbstractCache.java:58)
at coldfusion.util.SoftCache.get_statsOff(SoftCache.java:133)
at coldfusion.util.SoftCache.get(SoftCache.java:81)
at coldfusion.runtime.TemplateClassLoader.findClass(TemplateClassLoader.java:591)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:80)
at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
at coldfusion.CfmServlet.service(CfmServlet.java:201)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

Thanks Vishu,
We are running Coldfusion 9 and attach is the sample code and error message.:
The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.
The CFML compiler was processing:
A cfgrid tag beginning on line 39, column 18.
The error occurred in E:/Websites/DreData/sobrietytesting/main/Sobrietytesting/Admin/view_users.cfm: line 54
52 :                     hrefkey="member_id"
53 :                     bind="cfc:tabledisplay.browseAccessAcountRequests(,,,)"
54 :                     >
55 :

WRT54GX2 does not pick up time from the network...

I have a WRT54GX2 running firmware 1.01.14 and it does not pick up time from the network. I have PacBell (now AT&T) as an ISP and a DSL link. My old Netgear router picks up the time immediately. I am trying to figure out if I have a defective unit or if this is a firmware bug. Without the time, I can not use any of the scheduling functions, nor measure uptime.
Does anyone have this router with the time working? I have set the appropriate time zone.
Thanks,
Martin

mneiman wrote:
Thanks for you ideas.
The backup file appears to be binary. However in searching through it I did see 3 time related text strings, namely: clock.stdtime.gov.tw, time-b.nist.gov and time.nist.gov. I can successfully ping clock.stdtime.gov.tw and time.nist.gov. This reinforces my belief that my ISP (AT&T nee PacBell) is not blocking access.
however ntp works on TCP port 123. ping works on udp 7 afaik. if your old netgear works i guess this is a router problem.
have you reset the router yet? afaik press reset button for 10 seconds.
you will however loose all settings and need to enter them again. it may however fix the issue.Message Edited by linksysinfo on 07-09-2006 03:09 AM
Regards Simon
NAS: TS-459 Pro - 3.6.1 Build0302T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
QPKG: WordPress 3.4, TwonkyMedia 6.0.39 QPKG - Zenphoto1.4.2.1 [7802] - phpMyAdmin v3.3.10
Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.4.13, Cisco SLM2008, Dlink DSM-520, Xbox360

Participant 'weblogic' does not have permissions to execute the operation ?

Hello,
We have modelize our Business process, this process can start with
An Automtaic task based on an event recevied from a web services or via a start event with an iniator task.
The deployment of this process was ok.
But when we try to run this process in the "Business Process Workspace" we get the folowing message : "Participant 'weblogic' does not have permissions to execute the operation. "
The users has the corresponding role of the lane so it should be right ?
Thanks
Grégoire.

Hi Heidi,
The Application list does contain the process link.
However, in the admin role association's page, the roles of the process are not present, and as such cannot be assigned. I've tried adding a role according to the naming convention but I assume they must be associated explicitly to the process by the deployment process...
We have loads of roles related to processses that have since been undeployed.
So what do you advise? Should we try to undeploy and redeploy the process? This was already been done and, as far as I know, with the same result.
Thanks
Miguel

[svn] 1931: the ja_JP swc' s should not have been removed from the locales package, I' m adding them back in

Revision: 1931
Author: [email protected]
Date: 2008-06-03 13:30:46 -0700 (Tue, 03 Jun 2008)
Log Message:
the ja_JP swc's should not have been removed from the locales package, I'm adding them back in
Modified Paths:
flex/sdk/trunk/build.xml

Hi Manny1/mreider,
First, I’m sorry to hear that you two may be having issues utilizing a recently purchased Gamers Club Unlocked (GCU) Gifting Card.
In all reality, our stores don’t even need to exchange the Gifting Card for the standard GCU card, although that option should be available to you if absolutely needed. The GCU Gifting Card can be applied to your My Best Buy membership by simply following the directions on the back of the card.
Thanks for sharing your feedback and I hope for a much better experience when you return to your local Best Buy to get this taken care of! If needed, please don't hesitate to ask for a manager or supervisor.
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Odd clicking sound from the speakers

There's a clicking sound from the speakers all the time, even when I'm not playing music. My PowerBook is only 1 week old, and I haven't dropped it or anything. Does anyone know what this is? Whenever I plug in my earphones or speakers, the sound stops.

I wish I knew. Having the same problem. Comes and goes. Presently it's happening and it BUGS. In the past I've tried disabling some of my extra scripts and software (especially extra preference panes), but you're probably not in the same boat there, having such a new machine.
Here's hoping someone has a solution!

I receives a strange sound from the speakers whenever my Z3TC boot.

https://www.youtube.com/watch?v=ik4BZPgLc3o&feature=youtu.be
I receives a strange sound from the speakers whenever my Z3TC boot.
after 33 seconds, It sound Tick~Tick~
What is it? Is it same with your?

@keikou
Can't recreate the issue, is or was your tablet locked to a carrier?
settings > about tablet > which software and build number do you have?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Viewset does not have data passed from GenIL

Hi All,
We have a custom component in which data is not getting passed from a ViewSet to the Overview page. The details of the issue are given below:
There is a detail view zsoEF and a table view zsoChild. These 2 views are housed in a viewset zsoVS. This view set has an event Eh_OnBack which requires the data from views zsoEF and zsoChild to be passed to overview view zsoOV.
We recently upgraded to CRM 7.0. After the upgrade, the values entered on the views zsoEF and zsoChild are processed in the ZGenIL. The context nodes and the custom controllers are filled correctly with the screen values and some auto added data based on validations..
When we click on the Back button, then Eh_OnBack does not have data in the Custom Controller. I am not able to pin point the reason for this missing data in the Back event. From the way i understand, when we do data binding in the views, we don't have to do that in ViewSet. Has there been any change in this design in CRM 7.0?
I would like to know if there is any workaround for this issue.
Thanks,
Rini

Hi Rini,
Did you try to bind the context nodes with the component controller. Can give it a try whether it resolves the problem. Any way it is difficult to say anything as we don't have an idea what exactly you did in the component. Lets take it forward. In the mean time have a look in the below link.
History navigation and context initialization calls - CRM - SCN Wiki
Thanks,
Javed.

The user does not have permission to perform the operation

Hi,
Configuration: JES Q405. Solaris 10 x86.
My customer initially installed JES (Portal + AM + DS) on the same box.
Now, they have a change in their requirement. They want DS to run dedicatedly in another box.
I have successfully installed a fresh instance of DS in the new box with the same domain name (thus maintaining the same dn). I have copied over 99user.ldif and exported all the data from the original DS in the old box.
Everything is running fine. DS in the new box is able to function properly.
On the Portal and AM side, I have changed the following file:
1. AMConfig.properties
2. serverconfig.xml
3. PSConfig.properties
I have also changed the Primary LDAP entry in iPlanetAMAuthLDAPService, iPlanetAMAuthMembershipService, and iPlanetAMPolicyConfigService.
However, when I started AM (which is running on Sun Web Server), I got the following error message:
------------------- in /var/opt/SUNWam/debug/amSDK ---------------------------
05/01/2006 04:46:43:324 PM SGT: Thread[main,5,main]
ConfigManager->Constructor: root DN dc=sg,dc=com
05/01/2006 04:46:43:403 PM SGT: Thread[main,5,main]
Invoking _ldapPool.getConnection()
05/01/2006 04:46:43:403 PM SGT: Thread[main,5,main]
Got Connection : LDAPConnection {ldap://sg-dsq405.sg.com:389 ldapVersion:3 bindDN:"cn=puser,ou=DSAME
Users,dc=sg,dc=com"}
05/01/2006 04:46:43:410 PM SGT: Thread[main,5,main]
Invoking _ldapPool.close(conn) : LDAPConnection {ldap://sg-dsq405.sg.com:389 ldapVersion:3 bindDN:"c
n=puser,ou=DSAME Users,dc=sg,dc=com"}
05/01/2006 04:46:43:411 PM SGT: Thread[main,5,main]
Released Connection : LDAPConnection {ldap://sg-dsq405.sg.com:389 ldapVersion:3 bindDN:"cn=puser,ou=
DSAME Users,dc=sg,dc=com"}
05/01/2006 04:46:43:411 PM SGT: Thread[main,5,main]
ERROR: ConfigManager->Constructor: Caught exception Message:The user does not have permission to per
form the operation.
------------------------------------ end --------------------------------------------------
-------------------------- in /var/opt/SUNWam/debug/amAuth ---------------------
05/01/2006 04:47:21:252 PM SGT: Thread[main,5,main]
Directory Host: sg-dsq405.sg.com
Directory PORT : 389
05/01/2006 04:47:21:298 PM SGT: Thread[main,5,main]
AuthD initializing
05/01/2006 04:47:21:610 PM SGT: Thread[main,5,main]
ERROR: AuthD failed to get auth session
05/01/2006 04:47:21:688 PM SGT: Thread[main,5,main]
ERROR: AuthD init()
com.iplanet.dpro.session.SessionException: AuthD failed to get auth session
at com.sun.identity.authentication.service.AuthD.initAuthSessions(AuthD.java:709)
at com.sun.identity.authentication.service.AuthD.<init>(AuthD.java:229)
at com.sun.identity.authentication.service.AuthD.getAuth(AuthD.java:494)
at com.sun.identity.authentication.UI.LoginLogoutMapping.init(LoginLogoutMapping.java:71)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
----------------------------------------- end --------------------------------------------------
Any idea how to solve this problem? Thanks in advance!
justCheeChong
Message was edited by:
justCheeChong

check if the new DS instance has all the AM required ACI's.

PO does not have Storage loction but the storage loction exists in EKPO

Hello
I have a PO, where the PO item does not have a storage location, while checking in ME23N.
But for the same PO i saw storage location exists in table EKPO. I suspect some inconsistencey, please let me know is there any correction program to clear this?
Thanks in advance...
Eswar

Hello All
The issue has been solved. Please find the solution from SAP and it works fine.
Purchase order has Item category "S" which means the PO
items are Third Party PO items and so the goods receipt will not be
stored in your storage location. So the storage location is not
relevant for third party PO items and it is not customized to show the
storage location value in these PO items.
In case you need these storage location information in
ME21N/ME22N/ME23N please check the customizing:
Materials Management -> Purchasing -> Purchase Order -> Define Screen
Layout at Document Level.
In standard for Third PO items we have the field selection key
"PT5F Third-party item" -> Detail "Basic Data, Item" -> doubleclick ->
field "Storage location" doesn't has any customizing.
Regards
Eswar

Since I downloaded iOS6.1 I can not hear my messages/phone calls/emails or any sounds when the phone is lock. Any setting I can change?

Since I downloaded iOS6.1 I can not hear my messages/phone calls/emails or any sounds when the phone is lock. It doesnt connect to bluetooth either. Any setting I have to change?
My sounds settings are ON and my side mute button is NOT pushed down to orange.
When the phone is unlock all the sounds are fine, but as soon as it locks it goes dead silent mode!

http://support.apple.com/kb/TS1630

My iphone5 does not have any sound from the speakers ringtones or music any suggestions?

Similar Messages

Maybe you are looking for