My iphone5 was stolen.. pls help how to deactivate it? badly need your help..

My iphone5 was stolen.. i was slept on the bus, pls help how to deactivate it? badly need your help.. its only two months on me

What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
  1. Reporting a lost or stolen Apple product
  2. Find my lost iPod Touch
  3. AT&T. Sprint, and Verizon can block stolen phones/tablets
  4. What-To-Do-When-Iphone-Is-Stolen
  5. What to do if your iOS device is lost or stolen
  6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
  7. Find My iPhone
  8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
  1. Find My iPhone
  2. Setup your iDevice on iCloud
  3. OS X Lion/Mountain Lion- About Find My Mac
  4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

Similar Messages

  • HT4858 My iphone5 was stolen (second time) :( How can I recover my photos and videos on icloud? Last time they did not all come back

    My iphone5 was stolen (second time) How can I recover my photos and videos on icloud? Last time they did not all come back. Specifically I need photos I took 1 day before it was stolen.

    If they are in photo stream and your computer meets the minimum system requirements (OS X 10.7.2 or higher and iPhoto '11 9.4 or later or Aperture 3.4 or later; or Vista SP2 or later if you have a PC), set up iCloud on your computer and enable photo stream, as explained here: http://www.apple.com/icloud/setup/.  You'll get any photo stream photos from the last 30 days.
    Camera roll photos are stored in your iCloud backup, and can only be recovered by restoring the entire backup to another iPhone or iPod Touch that is running the same or higher version of iOS as the phone you backed up.

  • Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

    Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

    Hello,
    this topic is still a problem for me, does anybody have an idea.
    Just to show what's my problem:
    Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
    The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
    That works, the SH's are not shown anymore.
    I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
    All this can be done modification free by appends.
    The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
    This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
    But I have not found any way to do this modification free.
    The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
    But I want avoid this modification.
    So, is there any way to do this without modifing any of the original SAP SH's ?
    Helmut Fischer

  • Badly need your help: How to fix my iphone 3gs restoration problem

    it's been for a month now that i could not use my iphone 3gs.  i encountered some problem which i have difficulty to fix or resolve the problem: Currently my iphone 3gs is in recovery mode (which it seems got stucked). When I plug my iphone to restore it via itunes the message appeared as follows: The iPhone"iPhone" could not be restored. An unknown error occurred (1).  I already tried to search the web but could not find any suggestion how to fix it.  If there's anymore that encountered the same problem, I highly appreciate if you could assist me step by step.  By the way, i bought my iphone 3gs "open or unlocked", so I don't jailbrake.  thanks.

    You could try to use another USB port, check your security software settings or see if you can restore on another computer.
    iTunes for Windows: Troubleshooting security software issues

  • Sapxpg  program core_dump,   how can I do?  need your help

    In my AIX system ,  I get such an error:   
    I do not know what can I do ?     do you have any advise?    thanks
    LABEL:          CORE_DUMP
    IDENTIFIER:     A63BEB70
    Date/Time:       Sun Jul 13 07:01:34 2008
    Sequence Number: 3823
    Machine Id:      00C0EEEC4C00
    Node Id:         KS1DSDB1
    Class:           S
    Type:            PERM
    Resource Name:   SYSPROC
    Description
    SOFTWARE PROGRAM ABNORMALLY TERMINATED
    Probable Causes
    SOFTWARE PROGRAM
    User Causes
    USER GENERATED SIGNAL
            Recommended Actions
            CORRECT THEN RETRY
    Failure Causes
    SOFTWARE PROGRAM
            Recommended Actions
            RERUN THE APPLICATION PROGRAM
            IF PROBLEM PERSISTS THEN DO THE FOLLOWING
            CONTACT APPROPRIATE SERVICE REPRESENTATIVE
    Detail Data
    SIGNAL NUMBER
              11
    USER'S PROCESS ID:
                    438672
    FILE SYSTEM SERIAL NUMBER
              17
    INODE NUMBER
               9
    PROCESSOR ID
               6
    CORE FILE NAME
    /usr/sap/PRD/DVEBMGS00/work/core
    PROGRAM NAME
    sapxpg
    STACK EXECUTION DISABLED
               0
    ADDITIONAL INFORMATION
    Unable to generate symptom string.
    Stack is unusable.

    here is the content of file:dev_cp    ,    I do not know whether there are any problems?   and my sapxpg generated core_dump in 07:00 AM,    I can not find any record at the time 07:00 AM,
    Trace file of control program (trace level 3)
    < Function: BtcTrcInit> Function: main  SAPXPG 640
    2008-07-13--15-00-21 : Before BtcXpgDetach
      > Function: BtcXpgDetach    Can't detach from process group (already leader)
      < Function: BtcXpgDetach  Accept RFC connection from R/3 system
    2008-07-13--15-00-21 : Before RfcAccept
    2008-07-13--15-00-21 : RfcAccept returned OK
    security check switched OFF
      Install RFC call SAPXPG_START_XPG
      Install RFC call SAPXPG_START_XPG_LONG
      Install RFC call SAPXPG_END_XPG
      Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
    2008-07-13--15-00-21 : Before first call of RFCDispatch
      > Function: BtcXpgStartXpg   
    2008-07-13--15-00-21 : Beginning of BtcXpgStartXpg
        > Function: BtcXpgStartXpgImport      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgTable      < Function: BtcXpgTable    < Function: BtcXpgStartXpgImport    > Function: BtcXpgStartXpgInt      > Function: BtcXpgItTransfer        Content of source log table:
              Line  Text
              <No StdOut/StdErr output reported>
            Target log table is not identical to source
            ItGetLine terminated with NULL
          < Function: BtcXpgItTransfer      > Function: BtcTrcReset        Trace level reset to 3
          < Function: BtcTrcReset      Call mode: VIA RFC
          Input arguments of BtcXpgStartXpg:
            External program: brarchive
            Program argument string:  -u / -c force -p initPRD.sap -cds
            Contents of control flags:
              StdIn control flag: redirect StdIn
              StdOut control flag: store StdOut output in memory
              StdErr control flag: store StdErr output in memory
              Trace control flag: trace level 0
              Termination control flag: control program will wait for termination
          > Function: BtcXpgCheck        > Function: BtcXpgArgv          Scanned parameter 1: -u
              Scanned parameter 2: /
              Scanned parameter 3: -c
              Scanned parameter 4: force
              Scanned parameter 5: -p
              Scanned parameter 6: initPRD.sap
              Scanned parameter 7: -cds
              Total number of arguments scanned: 7
              Argument argv[0]: brarchive
            < Function: BtcXpgArgv      < Function: BtcXpgCheck      > Function: BtcXpgSigInst        set signal handler for SIGCHLD to SIG_DFL
            old signal handler for SIGCHLD: SIG_IGN
          < Function: BtcXpgSigInst      > Function: BtcXpgStart        > Function: BtcTrcInit        Process id: 442864
            Parent process id: 233906
          < Function: BtcXpgStart      Start status of external program: external program successfully started
          Id of external process: 0000930102
          StdOut/StdErr collected in memory
            Line  Text
            <No StdOut/StdErr output reported>
        < Function: BtcXpgStartXpgInt    > Function: BtcXpgStartXpgExport      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam    < Function: BtcXpgStartXpgExport   
    2008-07-13--15-00-21 : End of BtcXpgStartXpg
      < Function: BtcXpgStartXpg 
    2008-07-13--15-00-21 : After first call of RFCDispatch
      Wait for RFC call SAPXPG_END_XPG
    2008-07-13--15-00-21 : Before second call of RFCDispatch
      > Function: BtcXpgEndXpg   
    2008-07-13--15-00-21 : Beginning of BtcXpgEndXpg
        > Function: BtcXpgEndXpgImport      > Function: BtcXpgTable      < Function: BtcXpgTable    < Function: BtcXpgEndXpgImport    > Function: BtcXpgEndXpgInt      > Function: BtcXpgItTransfer        Content of source log table:
              Line  Text
              <No StdOut/StdErr output reported>
            Target log table is not identical to source
            ItGetLine terminated with NULL
          < Function: BtcXpgItTransfer      > Function: BtcXpgReadChild        Read returns 28 bytes
            > Function: BtcXpgLog          Log message (27 byte): BR0002I BRARCHIVE 6.40 (15)
            < Function: BtcXpgLog        Read returns 79 bytes
            > Function: BtcXpgLog          Log message (78 byte): BR0006I Start of offline redo log processing: adyivkpp.cds 2008-07-13 15.00.21
            < Function: BtcXpgLog        Read returns 113 bytes
            > Function: BtcXpgLog          Log message (112 byte): BR0477I Oracle pfile /oracle/PRD/920_64/dbs/initPRD.ora created from spfile /oracle/PRD/920_64/dbs/spfilePRD.ora
            < Function: BtcXpgLog        Read returns 1 bytes
            > Function: BtcXpgLog          Log message (0 byte):
            < Function: BtcXpgLog        Read returns 55 bytes
            > Function: BtcXpgLog          Log message (54 byte): BR0013W No offline redo log files found for processing
            < Function: BtcXpgLog        Read returns 183 bytes
            > Function: BtcXpgLog          Log message (0 byte):
            < Function: BtcXpgLog        > Function: BtcXpgLog          Log message (76 byte): BR0007I End of offline redo log processing: adyivkpp.cds 2008-07-13 15.00.27
            < Function: BtcXpgLog        > Function: BtcXpgLog          Log message (49 byte): BR0280I BRARCHIVE time stamp: 2008-07-13 15.00.27
            < Function: BtcXpgLog        > Function: BtcXpgLog          Log message (54 byte): BR0004I BRARCHIVE completed successfully with warnings
            < Function: BtcXpgLog        Process executing external program has terminated
          < Function: BtcXpgReadChild      > Function: BtcXpgEnd        > Function: BtcXpgLog          Log message (44 byte): External program terminated with exit code 1
            < Function: BtcXpgLog      < Function: BtcXpgEnd      Termination status of external program: program terminated with error code 1
          StdOut/StdErr collected in memory
            Line  Text
               1  BR0002I BRARCHIVE 6.40 (15)
               2  BR0006I Start of offline redo log processing: adyivkpp.cds 2008-07-13 15.00.21
               3  BR0477I Oracle pfile /oracle/PRD/920_64/dbs/initPRD.ora created from spfile /oracle/PRD/920_64/dbs/spfilePRD.ora
               4 
               5  BR0013W No offline redo log files found for processing
               6 
               7  BR0007I End of offline redo log processing: adyivkpp.cds 2008-07-13 15.00.27
               8  BR0280I BRARCHIVE time stamp: 2008-07-13 15.00.27
               9  BR0004I BRARCHIVE completed successfully with warnings
              10  External program terminated with exit code 1
        < Function: BtcXpgEndXpgInt    > Function: BtcXpgEndXpgExport      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam    < Function: BtcXpgEndXpgExport   
    2008-07-13--15-00-27 : End of BtcXpgEndXpg
      < Function: BtcXpgEndXpg 
    2008-07-13--15-00-27 : After second call of RFCDispatch
    2008-07-13--15-00-27 : After call of RfcClose (wait)
    < Function: main
    2008-07-13--15-00-27 : End of SAPXPG: main

  • HT201269 My iPhone5 was stolen and need to back up all data How can I do that?

    My iPhone5 was stolen and need to back up all data How can I do that?

    If you mean data from the iPhone itself, you can't back up anything from it now that it's no longer in your possession. If you didn't previously back up to iTunes or iCloud, then unless you are lucky enough to recover the iPhone intact, any data on it is lost.
    Regards.

  • HT5312 Hi I forgot my security question how I can rest becouse I was going APP this massage pop of in the app page I benn buying app in this iPod may time they are say for first time you are buying apps in iPod pls I need your help to resist my security q

    Hi I forgot my security question how I can rest becouse I was going APP this massage pop of in the app page I benn buying app in this iPod may time they are say for first time you are buying apps in iPod pls I need your help to resist my security question

    The Three Best Alternatives for Security Questions and Rescue Mail
         1.  Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
         2.  Call Apple Support in your country: Customer Service: Contact Apple support.
         3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • My iphones was stolen on friday how can get my contacts back or is there any way i can track it? i cant find my imea number.

    My iphones was stolen on friday how can get my contacts back or is there any way i can track it? i cant find my imea number.

    The only way to locate/disable/erase any lost/stolen iPhone/iPod Touch is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords, especially your Apple ID/iCloud password NOW!
    If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
    If locked with a passcode, and running iOS 7.0, then phone cannot be activated or the passcode removed without knowing your Apple iD/Password. It will be nothing but a useless paperweight.
    If not running iOS 7.0, the phone can be forced into recovery mode & restored.
    Your carrier has a record of your IMEI number. Also read here:
    http://support.apple.com/kb/ht4061

  • How on earth do you contact adobe - i lost my serial number before registering my standalone software...the phone service is offshore and not very helpful - the chat (i thought it was realtime) has been slow - if i understand, you need your proof of purch

    how on earth do you contact adobe - i lost my serial number before registering my standalone software...the phone service is offshore and not very helpful - the chat (i thought it was realtime) has been slow - if i understand, you need your proof of purchase and they will issue a serial number

    To help address performance issues the Identi-e web site is currently down for maintenance.  If you are trying to redeem a product code to obtain your serial number for the Student & Teacher edition of our software you will currently be unable to do so. We would recommend installing the software in trial mode for the moment until the maintenance period is complete.

  • My device was stolen and i want to know his place can you help me please

    my device was stolen and i want to know his place can you help me please
    but iam in syria
    <Personal information removed by Host>

    thanks for you
    but Why they did not give me a solution to my problem
    Please help me because my car had been stolen and a telephone inside and I want to know my phone place in order to know where my car

  • My iphone was stolen and called police. Now the ditective needs to know my IMEI number. I need to know the number of the stolen one. How can I get the IMEI number?

    My iphone was stolen and called police. Now the ditective needs to know my IMEI number.I need to know the number of the stolen one. How can I get the IMEI number?                   

    Quickest place to look is in the label attached to the box the phone came in.
    Not around anymore? Maybe the carrier you used the phone with can facilitate the information. Also, when under contract, the IMEI is listed in the paperwork. Apple, alas, is quite unhelpful with that information.

  • HT201401 I need your help. I use iPhone 4 . I've just downloaded new iOS for while. Today my phone couldn't on and off . When I' was home and tried to connected with USB ,but it wasn't necessary. Pls help me.

    I Need your help ,pls. I can't use my iPhone . It can't on and off , no display anymore.

    Hello Apple_Addict22,
    Thank you for your question. iOS 7 requires iTunes 11.1.  First, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
    iTunes: How to install the latest version
    http://support.apple.com/kb/ht5654
    If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
    Download iTunes
    http://www.apple.com/itunes/download/
    Once the file downloads, double click on the installation file that downloaded to initiate the installation.
    Best,
    Sheila M.

  • HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

    HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

    You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.

  • I IPhone5 bought in Dubai. How can I install it on your IPhone Face Time?

    I IPhone5 bought in Dubai. How can I install it on your IPhone Face Time?

    You can't.

  • HT5538 i can't find the facetime on my iphone i was using it before 1 month after that it's just disappear i need your help to get it back . thank you

    hello everyone i need your help please
    i can't find the facetime on my iphone i was using it before 1 month after that it's just disappear i need your help to get it back .
    thank you

    FACETIME MISSING
    The governments in some middle eastern countries have banned Facetime and it is disabled on iphones purchased in those countries.  The countries include KAS, UAE and others.  There is no way to get Facetime on such phones (for example it cannot be downloaded and installed) and taking the phone to another country does not cause Facetime to reappear on such phones. In  support.apple.com/kb/ts3367  it says “Note: FaceTime may not be available, or may become unavailable, on devices purchased or used in certain countries, including Saudi Arabia and the United Arab Emirates. Check your device's region of purchase for more information.”

Maybe you are looking for

  • How to Create a Custom Color Chooser/Palette with 16 or 24bit Color Support

    Hi All, I need some help on how to create a color palette/chooser with 16 bit or 24 bit color options available First setting up the context: I am developing an application which allows designing some GUI screens by adding various controls. Now these

  • How to prevent B radio clients from connecting

    How can I enforce only G & A radio clients from being able to connect to my 1131AG Access Points? I know that when a B client connects it automatically brings all the G clients down to B due to the fact that G is backward compatible but does not oper

  • MI 7.0 or MI 7.1 installation please help

    Dear all, I am Basis consultant. We need to install MI 7.0. Please correct me if i am wrong, As MI 7.1 is under Ramp-UP phase we dont want to go for MI 7.1 And MI 7.0 comes as usage type for Neweaver 2004sR1 requires AS ABAP and AS JAVA and no additi

  • Shutting down the database getting error.

    Hi, while i am shutting down the database, i am getting below error message. SQL> shutdown immediate; ORA-01116: error in opening database file 170 ORA-01110: data file 170: '/x01/CQ_Request/ORADATA_FILE/otlmedium_data08.dbf' ORA-27041: unable to ope

  • Actionscript + SQlite error.... help!  (flex builder)

    Ok, I have narrowed down my error to have been coming in some way from the following code: [CODE] for (var i:int = 0; i < size; i++) try    createStmt = new SQLStatement();                   createStmt.sqlConnection = conn;    var sqlInsert:String =