My iphone6 plus wont imessage unless I'm connected to wifi. Anyone else have this issue?

my iphone6 plus wont imessage if I'm not connected to wifi. I also cannot use safari or siri without wifi. Anyone else have this problem?

Are you vaguely trying to say that you have no internet unless you are connected to wifi
as in you get no 3G/4G connection for data

Similar Messages

  • I'm using imessage and do not want to use sms in some cases.  I have the settings turned off so its not supposed to use SMS but it still does anyway. Does anyone else have this issue?

    Recently upgraded my iphone 4 to ios 5.  I have a problem with imessage and sms.  I have some contacts that I don't want to send sms to ever.  So I set the "Send As SMS = off" thinking it would not ever send sms(unless I set it to).  However, in the middle of imessage conversation with almost a full 3G signal it just sent as SMS. Then back to imessage.  Totaly ignored the do no send sms setting.Has anyone else seen this issue? I wish the they would seperate these two apps so they could never cross up. Some people only have data and others have both.

    CTRL+0 (<--that is a zero) will reset your zoom level on affected pages. Firefox remembers the zoom level you last used on a page.
    Built-in Zoom functions:
    *http://support.mozilla.com/en-US/kb/Page+Zoom
    *http://support.mozilla.com/en-US/kb/Text+Zoom
    Zoom Add-ons:
    *'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ '''''
    *'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
    **More info on NoSquint: http://urandom.ca/nosquint/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • After updating to IOS 8, my cellular enabled iPad will show "no service" unless turned off and completely rebooted.  Does anyone else have this issue?

    After updating to IOS8, my iPad 2,  which has both AT&T cellular and wifi, needs to be completely turned off and rebooted to get cellular service. Does anyone else have this issue ?

    Hi Hi Steve Giusto,
    If you are having issues with Xxx_state issue here_xxX, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    iOS: Force an app to close
    HT5137
    Next, I would try restarting the iPhone -
    HT1430
    If the issue is still present, you may want to restore the iPhone as a new device -
    HT4137
    Thanks for using Apple Support Communities.
    Best,
    Brett L ,
    If you are having issues with your iPad not staying connected to cellular service, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    iOS: Force an app to close
    Next, I would try restarting the iPad -
    Turn your iOS device off and on (restart) and reset
    If the issue is still present, you may want to restore the iPad as a new device -
    iOS: How to back up your data and set up your device as a new device
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I updated my mac book air last night and it wont boot up today.. anyone else have this issue?

    Can anyone help me and suggest what i should do ??

    Can anyone help me and suggest what i should do ??

  • My friends iPhone 6 Plus has lines going through the screen. Does anyone else have this problem?

    Help? There are white lines going through the right side of screen. I reset the phone and restored it, I don't think its software.

    is it still a hardware issue ?
    I am seeing from last 2-3 days or i realized in last 2-3 days but am keeping seeing every 1-2 hrs apart the lines keep coming and phone also acting especially in the areas of touch response.  I am on latest 8.1.3 version .
    At least i know that i am not alone.

  • My iphone 3g wont load all comments from online newspaper. when I touch the "load more comments" button the little spinning spiral appears then nothing happens. Anyone else have this problem with some online newspapers?

    My iphone 3g wont load all comments from online newspaper. when I touch the "load more comments" button the little spinning spiral appears then nothing happens. Anyone else have this problem with some online newspapers?

    Anything?

  • After updating my 4S to iOS 5.1.1 last night, none of my data applications are working today, nor Siri, iMessage or anything of the like. I'm at a loss as to what might have caused it. Is anyone else having this issue/has anyone found a fix?

    After updating my 4S to iOS 5.1.1 last night, none of my data applications are working today, nor Siri, iMessage or anything of the like. I'm at a loss as to what might have caused it. Is anyone else having this issue/has anyone found a fix? Everything seems to work fine if I connect to wireless, but if I'm not connected to it then nothing is working. My service provider says everything should be working fine, I still have the 3G symbol and full bars.

    Somebody clearly hasn't read the User Guide.
    Basic troubleshooting steps are retart, reset, restore from backup, restore as NEW. 
    If you have tried ALL of these steps and you're still having problems, then you need to bring your phone into Apple for evaluation.

  • My iPhone6 gets hot when speaking more that 5 minutes - anyone else have this problem?

    My iPhone6 gets hot when speaking more that 5 minutes - anyone else have this problem?

        Glen_2015,
    Let's make sure we find the root cause here!  When did this start happening? Is there any physical or water damage to the device? Does the iPhone overheat during other activities? Please share some details.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Updated my iphone 4 to 7.0.2 yesterday, worked fine for an hour, now phone wont even turn on??? anyone else have this problem?

    I have an iphone 4, updated it to IOS 7.0.2. yesterday, it worked perfectly for a while,  now cannot even turn my fone on...
    anyone else have this problem ??
    thanks

    Hey xxikearnsxx,
    When troubleshooting power issues, the following article provides the most relevant information:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks,
    Matt M.

  • HT3529 my iphone will only send iMessages. I can not send messages to other types of phones. Does anyone else have this problem?

    my iphone will only send imessages. I can not send messages to other phones.  Has anyone else had this problem?

    Check with your cell provider and make sure your texting plan is properly provisioned.

  • My battery will not charge unless it is turned off. has anyone else had this problem?, my battery will not charge unless it is turned off. has anyone else had this problem?

    my battery on my iphone 4 will not charge unless the phone is turned off. Has anyone else had this problem?

    Is this observed as the iPhone is plugged into a Computer or into an AC outlet; or both?  In any case you should try a Reset of the iPhone by depressing the Sleep button and the Home button at the same time until the Apple logo appears then wait for the Reset to bring your iPhone back to the Lock-Screen. 

  • Hyperlinks won't load in 6.0 unless my laptop's cursor is in motion. Anyone else having this issue?

    Hello, I upgraded from 5.0 to 6.0 today, and I noticed that my pages weren't loading unless I moved my cursor. It was obvious Firefox was gathering the right information because it displayed the "I'm thinking" cursor, but the pages I had just clicked on wouldn't load until I moved my cursor. For pages that loaded in multiple layers, like Wikipedia articles, I had to sit there making little touchpad circles until my pages fully came up. This was happening on every page. Now I've reinstalled 5.0 and I'm having no problems whatsoever, so it was only in 6.0. Has anyone else had this experience?
    I'm running Windows 7 on a Dell Inspiron 1545 with no hardware mods. My interface and drivers are all up to date as far as I know, and I never had touchpad issues before.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Is anyone else having this issue with iMessages?

    Hey there,
    Is anybody else having the issue with iMessages or text messages, when you go back to the list of contacts… The search bar for messages shows it halfway every time?
    The search bar shows up half way :/

    http://support.apple.com/kb/TS2755
    Check out the section dealing with iMessage issues

  • TS4268 I can send imessages through all numbers and emails but my own, anyone else have this problem?

    When I am trying to chose who can send and recieve imessages on my iphone, my number is grayed out and is not an option, but they will send to my email or my moms iphone

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • I tunes 12 wont import music from my macbook into library. Anyone else have this problem? how can it be fixed?

    Add to library function doesn't work, neither does drop and drag.

    Hi freezebri,
    The following steps may resolve your issue:
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/ht1551
    If your TV screen appears fuzzy or black (you see no video)
    Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
    When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
    Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
    Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
    Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
    Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
    If you are connected via HDMI, try unplugging and replugging your HDMI cable.
    If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
    Hope this information helps ...
    - Judy

Maybe you are looking for

  • Getting wrong values from modbus slave

    Hi, I'm trying to get data out of a lumel na5 digital meter. The device is connected via its RS485, through a RS232->RS485 converter to the RS232 port of the PC. I've donwloaded the NI modbug library, and was able after some work to communicate with

  • Error connecting to web analysis report from workspace

    Hi, There are a number of web analysis reports. There is a link to one in a planning task list. However, when the report is opened an error appears saying Required application context analyzer is not available. Please contact your administrator The r

  • I have to position my iPod Touch 2 for my Mac and PC to detect it. Any fix?

    My iPod Touch 2 has to be position exactly the right way for iTunes to detect it. I have restored to non-jailbroken, tried a Google Search, I can't take it into Apple cuz' it is out of its Warranty, and it would probably cost like $100 dollars (NZD)

  • ITunes 10.5 is opening automatically, even though no device is plugged in

    After installing the latest version of iTunes for Windows and iOS5 on my iPads, it opens randomly on it's own even if no device has been plugged in.  I thought at first it might be wireless synching (my Zune software opens automatically when it syncs

  • Problem in migrate Bpel 10.1.2 to 10.1.3

    Hi to all, I used bpel 10.1.2 and now I want to migrate to 10.1.3 but I have problem for conflict in new libraries and what used already; can you say me what are versions of new libraries in bpel 10.13 for example saaj.jar, activation.jar, oc4jclient