My iPhoto doesn't work after installing lion?

My Iphoto doesn't work after installing lion.
it suggest that I have to instal iphoto again.
where can I find this

If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

Similar Messages

  • Launchpad Gestures doesn't work after install Lion

    Hey people, I have this problem, after install Lion all gestures works properly, but Launchpad and Show desktop doesn't work even with the option in the Trackpad enabled.
    Anybody can help me please.
    Kind regards.

    Here are my best suggestions for your camera problem:
    • If Apple's http://support.apple.com/kb/HT2090
       suggestions do not help you, continue with the following.
    • Use Disk Utility to repair permissions and then
       download and apply the 10.7.2 Combo Update:
         http://support.apple.com/kb/DL1459
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    The Combo version of updates can sometimes correct
    strange problems like yours.
    For camera problems in web video, you may need to update to the current version of Flash: http://www.adobe.com/software/flash/about/
    If you need to update Flash, follow Adobe's instructions and uninstall your old Flash before installing the new one: http://kb2.adobe.com/cps/908/cpsid_90893.html

  • My microphone doesn't work after installing lion on iMac early 2009

    Hello,
    I've just installed LION and everthing seems to be OK except the microphone, it doesn't work on skype, imovie.
    I have an Imac early 2009.
    Will this bug be fixed in the next 10.7.1?
    Please if you can help me,
    Thanks

    If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
    Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

  • My itunes doesn't work after installing lion 10.7. I even downloaded the updated version of itunes, does anyone know what to do?

    itunes doesn't work anymore

    My itunes was working fine until we try to connect a new ipod touch. It said I needed to update the itunes to 10.5 or higher. To do that I had to update my OS X  Lion also.. now it doesn work... grrrr. Please if you have the solution post. I am placing a call to apple support to see if they can help me. Also I was looking for alternative software in case I can't make it work. Do you have any recommendations? Thank you and I am sorry I cant be helpful yet.

  • Backlit keyboard doesn't work after installing Lion?

    After updating to Lion my keyboard lights are not working anymore
    I have a 2009 medio mbpro.
    It's really annoying
    Someone help me please?

    If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
    Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

  • My E-Mail Accounts Pop3 doesn´t work after update Lion

    My E-Mail Accounts Pop3 doesn´t work after update Lion.

    Same here,and Apple support did not have a solution!!

  • Sports fan widget not working after installing Lion

    After installing Lion, the sports fan widget stopped working. All the information is there but it looks like it has been expanded. Is anyone else having this issue?

    i'm having an issue with a widget that stores all my passwords. it just doesn't function at all.

  • Stand-by button on Cinema HD display doesn't work after Mountain Lion upgrade

    Hi,
    After I upgraded my Mac mini (spring '09) to Mountain Lion it appears that the buttons on the side of my Cinema HD display doesn't work. There is a setting in sys preferences that should put the Mac in stand-by when the power button is pressed. This doesn't work after I upgraded to OSX 10.8 Mountain Lion.
    Does anyone have similar experience. Anyway to fix it?
    Thanks,
    Henrik

    Have done some further investigating (to no avail).  The TV is displaying in my system Info as follows:
    Intel HD Graphics 3000:
      Chipset Model: Intel HD Graphics 3000
      Type: GPU
      Bus: Built-In
      VRAM (Total): 384 MB
      Vendor: Intel (0x8086)
      Device ID: 0x0116
      Revision ID: 0x0009
      Displays:
    Color LCD:
      Display Type: LCD
      Resolution: 1440 x 900
      Pixel Depth: 32-Bit Color (ARGB8888)
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Built-In: Yes
      Connection Type: DisplayPort
    TOSHIBA-TV:
      Resolution: 1920 x 1080 @ 60 Hz
      Pixel Depth: 32-Bit Color (ARGB8888)
      Mirror: Off
      Online: Yes
      Rotation: Supported
      Television: Yes
    But nothing on the screen.
    Does anyone know if Apple have banned certain screens????

  • Buit in ethernet don't work after installing Lion

    Built in ethernet don't work after installing OSX 10.7 on my MacBookPro 2.4 Ghz Intel Core 15.
    Someone else has the same problem?
    On my MacPro 2 x 2.6 GHz Dual-Core Intel Xeon it's not working good, i have to do a restart to get internet connection.
    Is there somebody who has te same problem and has a solution?

    Something does look odd to me unless it's a typo in your post.
    This look like what I'd expect from the NetGear Router - not form the modem. That is when You browse the router stats (http:/192.168.1.1)
    I work with a modem with te folowing preverences:
    Wan IP address    87.211.205.210
    Lan IP address     192.168.1.1
    Primery DNS server       62.58.50.5
    Secondary DNS server   62.58.50.6
    and a separate router Netgear WGT624v3
    This is not exactly what I would expect from System Preferences/Network
    the system preferences for the network are
    Configure       by DHCP
    IP address     192.168.1.15
    Subnetmask  255.255.255.0
    Router           192.168.5.1  <<<<<<<<<<< this should be 192.168.1.1??????
    DNS              208.67.222.222
                         208.67.220.220
    The Router address in System Preferences/Network should be the same as the LAN IP Address. In this case it's on a different network.
    If this is not a type then this is a problem!
    Not sure how it got to be that way.
    Does it persist when resetting the modemand router?/
    Steve

  • Downloading new photos - iPhoto doesn't work after upgrading to Yosemite

    Hello,
    Since I upgraded to Yosemite, iPhoto has stooped working after downloading photos from my Sd card.
    Some picutres downloaded are black while some others are ok, but in any case I have to restart my iMac because every apps running can't be used anymore.
    That happens only with iPhoto, after downloading, instead normally it works.
    Now I use Aperture and everything is fine but I'd like to figure out why iPhoto acts like that.
    Do I have to trash it?
    Thank you.
    Fabrizio

    There have been a number of reports on here from folks with Raw issues after updating.
    This thread:
    RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10)
    explains how to delete and reinstall Raw support. It has worked for others.

  • Index (search button) in finder and mail doesn't work after installing mountain lion, index doesn't work after installing mountain lion

    after I up grade to mountain lion search button in finder and mail doesn't work: when I search from something the result is "zero"
    How can I solve this problem? thank you

    Try:
    sudo mdutil -E /
    which rebuilds spotlight and search indexes on the volume.

  • My iTunes doesn't work after installing MacOS 10.7 Lion

    Help!

    We need a little more information than that.
    iTunes works beautifully in Lion, so we'd need to know what issues you're seeing and whether you had any third-party iTunes extensions installed that may be interfering with iTunes in Lion.

  • Internal Microphone doesn't work (after installing Boot Camp 3.1)

    I have installed Boot Camp 3.1, and after this installation, my internal mic doesn't work (ONLY IN WINDOWS XP).
    I tried to fix the problem with several manners (hardware test in CONTROL PANEL / SOUND .../ VOICE TAB / VOICE RECORDING; reinstalling drivers and hardware etc), but I can't get success (for example, the test results: SORRY, NO SOUND IN MIC...).
    On the other hand, when I boot as Mac (Snow Leopard), I can use the mic (in skype, for example), without problem.
    I note that ear plug (connector in the back of the iMac) doesn't work too.
    Somebody can help me in this case ?
    Regards
    JGFilho

    i got a macbook pro, 2 weeks ago, the 2.53Ghz unibody aluminium, the desing of this mac is great even tough the system specs are really low for the price actually, im happy with it(the hardware)...
    The only reason i got this is cause apple claims to support windows, i like Mac OS, but i work on windows i need it... if theres no windows capability in mac i wouldnt ever buy one, so this issue is really bothering me A LOT. my impresions about apple are changing after seing this topic filled with questions and not a single moderator answer, go and check a logitech forum and see how they take care about user problems.

  • Web Interface doesn't work after installing 11g

    A couple days ago I decided to install Oracle 11g (after already having 10g Express Edition), after successfully installing 11g, I tried to access 10g EE using http://127.0.0.1:8080/apex/apex, and it doesn't work anymore. I tried using a java program with Netbeans that connects to my 10g Database and there's connection with no problems and I can upload/download data with no problems, I just can't access the web interface.
    Thanks in advance.

    jalvarito wrote:
    A couple days ago I decided to install Oracle 11g (after already having 10g Express Edition), after successfully installing 11g, I tried to access 10g EE using http://127.0.0.1:8080/apex/apex, and it doesn't work anymore. I tried using a java program with Netbeans that connects to my 10g Database and there's connection with no problems and I can upload/download data with no problems, I just can't access the web interface.
    Thanks in advance.And the error message is . . . ????

  • IPhoto won't work after installing iLife '11

    I installed iLife on both my work computer which is a '11 iMac and my personal computer is a '12 MacBook Pro. After installing I can't run iPhoto on either computer? When I try to open it on my computer it gives me a window that says "You can't open the application iPhoto because it may be damaged or incomplete." I've tried running updates and looking on forums that suggest 9.1 update but it will not allow me to upload it, it says I need a previous version? I'm not sure what is going on but it is very frustrating

    Open Finder, go to Applications folder, delete iPhoto and reinstall it again. Finally, open  > Software Update and update iPhoto until you have iPhoto 9.4.1

Maybe you are looking for

  • Using Time Machine HD, can I transfer applications to new iMac

    I have been using time machine to an external drive for 3 years. I'm going to buy a new iMac in June. When I transfer data etc. using the TM external drive, will it transfer my applications? Many of my apps were downloaded and I don't have discs. Whe

  • [X301] Laptop doesn't recognize optical drive! Help!

    Hello, my ThinkPad X301 2774-LFG doesn't recognize the optical drive! Can anyone help me??? Informations about the ThinkPad 1.) Newest BIOS is installed (1.02 (6EET21WW) 2008-10-09) 2.) BIOS-Option  Security->I/O Port Access-> Optical Drive  is ENABL

  • How to convert row into column

    Hi All, My oracle apps version is r12 and db is 10 and i am using Bi publisher version 10g. Is it possible to convert row into column in Rtf template, My Query is SELECT distinct pvs.vendor_site_code,sum(aia.invoice_amount) FROM ap_invoices_all aia,

  • Devices not shown on sidebar of iMac ie iPod ?

    Hi I am going crazy since the update of the software IOS6 onto my ipod. Now my imac do not shaow the device of the ipod [or even the iphone] on the sidebar. So I can't even drag songs from Imac to my ipod! Can anyone help please. The old software wor

  • Find while typing is a killer on a large spreadsheet

    I'm a casual user of Numbers '09 (2.0.4) on Mac OS X 10.6.4 on a Mac Pro. I just tried using Find on a 2-sheet, 10,000+ row spreadsheet of products. I gave up after a several attempts because of the dreadful performance. Numbers starts searching as I