My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

Similar Messages

  • Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent.  This does not happen with my tinyworld (TalkTalk) email account.  Can I (how can I) get this to work with TinyWorld?

    Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent.  This does not happen with my tinyworld (TalkTalk) email account.  Can I (how can I) get this to work with TinyWorld?

    You have to look at the email protocol being used.  the Apple email system uses IMAP, does Tinyworld use IMAP or POP?
    Does the email system permit delivery receipts to be requested?
    Just some of the things one needs to determine from the information provided by the email service provider.

  • How can I get paypal to work with itunes?

    I am having a problem with Paypal in general. I was thrilled when I saw that Paypal was a choice. So, I choose it for a payment option, verified all information and set up my preapproved payment account. For awhile everything was great. I bought music and podcasts with no problem. Then after trying to buy a song one day I was given a message that my account information has changed. I updated all my information (which I never changed in the first place) and that's when the problems started. I verifed all information with Paypal as well but when I click "Return to Merchant", I am directed to the apple website's itunes download page. I have already downloaded the latest version of itunes thinking MAYBE I needed to update. But still, no verification on the side of itunes that my account is active. Everytime I try to buy a song I am directed back to the page in itunes that I need to verify my paypal account. My account is active in paypal, but still I can't buy songs. I have verified my account information, I don't know how many times now in the past few days. I have emailed Apple support with my problem and have heard nothing back from them. I have been doing searches in discussions and have seen that paypal may not be the best choice for payment per so many problems customers are having. I feel I have no choice but to switch to a credit card if I want to buy anything in itunes. I think that if you offer a choice like paypal then it should be crediable. Apple really needs to take this choice away or fix it, and stop misleading customers into problems like this. It is really fustrating.
    Oh yeah, once I actually got into my account information and re-entered all my info (once again!?) and then I am given an error message "Form not complete....enter country". This confuses me to NO END. My country (USA) is clearly stated in the form. I mean, you have no way to change it, it's already there! ?*&#@! So, I click "Done" but itunes will not accept it. I get the same "enter country" error over and over. I have changed browsers(from IE to Mozilla and back again) and tried countless advice I have found while searching in Discussions to no avail. I have updated my information until my fingers are sore. I have verified my paypal account so many time that my email is full of confirmations from Paypal. I cannot understand why this is happening or how to fix it. Any advice would be appreciated.
    Thanks!

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • How can I get this to work with NAT?

    Hi Masters, 
    I need to add a route-map to a static NAT but the option seems to be available only if using inside/outside NAT, not if using enable NAT. 
    This is a CISCO1921/K9 running 15.2(4)M6
    Here's what I mean: 
    R2(config)#ip nat inside source static 192.168.3.20 10.10.10.20  ?    -->  allows the route-map option to be appended 
      extendable  Extend this translation when used
      mapping-id  Associate a mapping id to this mapping
      no-alias    Do not create an alias for the global address
      no-payload  No translation of embedded address/port in the payload
      redundancy  NAT redundancy operation
      route-map   Specify route-map
      vrf         Specify vrf
      <cr>
    R2(config)#ip nat source static 192.168.3.20 10.10.10.20 ?         -->  no route-map option 
      extendable  Extend this translation when used
      no-alias    Do not create an alias for the global address
      no-payload  No translation of embedded address/port in the payload
      vrf         Specify vrf
      <cr>
    What I need is multiple dynamic and static NAT rules between multiple interfaces, so I need a way to assign multiple static NAT depending on the destination. 
    For example, if server 192.168.3.0 wants to go to VLAN A, get statically translated to IP 1. 
    If the same server 192.168.3.0 wants to go to VLAN B, get statically translated to IP 2. 
    AS far as I know I need a route-map attached to the static NAT statements to make this happen, but the option is not available as shown above. And I don't want to use normal inside/outside NAT since I need the interfaces to allow NAT in both directions. 
    If anybody can share some light will be very appreciated!

    Paul, 
    The commands: 
    ip nat source list or ip nat source route-map works fine for dynamic NAT or PAT, but I need static NAT. 
    And the Static PAT statements won’t work since we need all ports defined. 
    So, I guess I need a way to map static NAT depending on the destination using domain-less NAT. 
    Can this be accomplished?

  • TS1363 my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help

    my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
    any thoughts anyone??

    Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
    I suggest that you begin by correctly identifying which iPod you have.
    http://support.apple.com/kb/HT1353

  • How can i get acrobat to work with windows vista

    How can I get adobeexportpdf to work with windows vista?

    But if, on the other hand you do mean Acrobat, please let us know what problem you are having.

  • On the fifa 14 iTunes app it won't let me turn on device music, how can I get this to work?

    On the fifa 14 iTunes app it won't let me turn on device music, how can I get this to work?
    I have bought full access to it.

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation.  It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0.  How can I get this to work?

    I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation.  It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0.  How can I get this to work?

    Oaky, at least we got that far.  Next step is to determine if all those "numbers" are really numbers.  Changing the format to "number" doesn't necessarily change the string to a number. The string has to be in the form of a number.  Some may appear to you and me as numbers but will not turn into "numbers" when you change the formatting from Text to Number. Unless you've manually formatted the cells to be right justified, one way to tell if it is text or a number is the justification. Text will be justified to the left, numbers will be justified to the right.
    Here are some that will remain as strings:
    +123
    123 with a space after it.
    .123

  • Negative (to inline a letter or to thin it) offset path does not work in Illus-CC 2014 (when preview is on- nothing happens). How can I get this to work like in previous versions.

    Negative (to inline a letter or to thin it) offset path does not work in Illus-CC 2014 (when preview is on- nothing happens). How can I get this to work like in previous versions.

    Thanks for your quick reply. I tried a number of different values. Usually when I do a negative offset they're very small values, like -.25 or -.5.
    An Update- I took the art work into Ai CS 6 and It still did not work, which is really strange. And I've used it hundreds of times with success in the past. Also I tried it with live type and outlines, ungrouped, un-compounded still could not get it to negative offset.
    Thanks for the help.

  • My laptop has broken and i have been given a new one by apple - this has changed my serial number so my Adobe Ps,Ai etc are not working and say my licence has expired. How can i get this to work?

    My laptop has broken and i have been given a new one by apple - this has changed my serial number so my Adobe Ps,Ai etc are not working and say my licence has expired. How can i get this to work?

    uninstall anything adobe 'migrated' to your new mac, clean and then properly install, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    if you need an activation count reset, http://helpx.adobe.com/x-productkb/global/service1.html

  • OSX sometimes places 31 character limit on file names. How can I get this error to stop?

    This error notice doesn't make sense, since many of my file names exceed 31 char. This error message pops up when saving documents, esp. web pages. As a consequence, OSX will refuse to let me save the file, until I shorten the name and so remove informative identifying features of the file name. But most of the time, OSX is perfectly happy to save files with names longer than 31 char. How can I get this error notice and block to turn off?

    I have also seen this issue it occurs regularly when transferring word documents files from my Macbook Pro running OSX 10.5.8 to my iMac running 10.9.4.
    My iMac HD should be formatted to factory standards as well since I have not mucked around with it since I bought it.

  • TS1702 My cars 2 app mate app is not working after upgrading from ipad to ipad 2...... synced.... uninstalled and re installed several times as well as wiped ne ipad out and re did the whole proccess several times. how can I get this app working?

    I have installed the cars 2 app mate on a ipad 2 from an ipad 1 synced with itunes account.. all is working except this app. After many times of un installing and re installing aswell as talking to apple tech suport this app is still not working.... its there it just has no function...... how can i get this installed and working, my grandson is autistic and uses this app many hours a day........ it is important for me to get this up and running again for him.......

    (1) So, I found a youtube video showing how to open up my iMac and replace a Disk drive. I opened it. I removed the disk drive. I opened the metal cover of the lid of the disk drive. It was clean and immaculate; so, it destroyed and debunked the dirty drive theory. But, just to make sure I sucked around the optical sensor with a vacuum and gently brushed it with a Q-tip.
    (2) I then watched a you tube video showing how the drive operated (it was a drive supplied with power outside an iMac with a transparent cover unlike the opaque metal cover that we have on our drives). My scientific curiosity started to wonder if somehow the mechanical part (of the electro-mechanical assembly) was locked or jammed. So, I started messing with the arms with the utmost care after watching the video to see if i could move them manually. Yes on some. The main arm that is linked with the drive motor was immovable. The rest I played with a little bit, took great notice in the start of the video to see how the arms looked before inserting a disk. I then put it all back together.
    It works now. My guess is that taking it out and then placing it back in along with the resetting options that others have done was the trick. I believe it is a possibility that the hard drive became locked mechanically in some strange manner after ejecting a DVD in conjunction with the uploading of the new OS. I believe the actual removal, reinstallation, and resetting of the drive put everything back into sync. My computer sits in a climate controlled dust free environment. I knew for a fact that this hard drive was OKAY.

  • How can I get Lion to work with label printer- Brother  QL 570 or Dymo 450 Turbo?

    I can't get Lion to work with label printers, either Brother QL 570 or Dymo Turbo 450. I want to uninstall Lion and use Snow Leopard unless there is a way to make Lion work with these devices. Any ideas?

    Dymo has released new drivers since Lion came out. Have you downloaded and
    installed them from the Dymo website?
    Some people have said that their Dymo label printers were set to off line by Lion, but
    worked fine after going to Print & Scan, selecting the Dymo printer, and making sure
    it was active/on-line. I had to do that with my Dymo 450 Label Writer.
    I cannot offer any tips about Brother, but you may wish to check their website
    for latest drivers.

  • Finally able to reset ipod, now I can't get it to work with itunes

    I would appreciate any assistance, as I am growing very frustrated.
    Friday night I was conducting a routine manual sync of my ipod. Everything was routine until I hit the disconnect button in itunes. My ipod disappeared from itunes device section, but "do not disconnect" stayed on the ipod's screen. I have had this problem before, and fixed it by resetting the ipod, so I tried that. The ipod would not reboot- I could hear noises as if the hard drive was spinning up, then the drive would stop. Then it would spin up again...etc. It did this over and over again, never even getting as far as the apple logo. I was able to put it into diagnostic mode but wasn't able to figure out anything helpful. Later that evening, I tried again to get the ipod to reset, and this time it got as far as the logo and stayed there.
    I plugged the ipod into an outlet and let it charge overnight, and discovered that the next morning it had evidently reset to factory settings- all my content was gone, and the ipod asked me to select my language on startup, but it was again booting normally. However, when I hooked it back up to my computer via usb cable, I had problems again. Windows asked if I wanted to reformat the drive and I said no. Itunes refused to recognize that I had plugged the ipod in, even though windows clearly had and the ipod had the "do not disconnect" symbol up. I tried resetting the ipod and the computer. This time, itunes recognized that I had connected the ipod and asked if I wanted to reformat it. I said yes but itunes quickly froze and would not allow me to close it or end the process via task manager. I had to reboot to get itunes working again.
    This is the situation I'm in now. Windows clearly recognizes the ipod- it shows as working in device manager and windows always asks if it should reformat when I plug it in (I tried saying yes once, but that didn't do anything). When I tried to select the ipod in windows explorer, explorer froze. When I open itunes after the ipod has been plugged in, or plug the ipod in while itunes is running, itunes refuses to recognize the ipod and freezes completely; task manager cannot end the process and the only way to restart itunes is by rebooting the computer. Trying to disconnect the ipod via windows' 'safely removal hardware' utility causes the utility to freeze and does not affect the ipod. The only way to get the ipod to stop displaying "do not disconnect" is to reset it, which again causes the ipod to (slowly) reboot and ask me to select a language.
    I have tried reinstalling itunes. (It's 9.0.3 now.) I've tried switching usb cables. I've tried switching usb ports. I have tried to put the ipod in diagnostic mode, and I've tried putting it in disk mode- I'm not able to do either. I've been through all the relevant apple support pages I could find and I'm still unable to even diagnose exactly what the problem is, much less how to fix it. It seems more likely than not that the problem is the ipod itself rather than itunes, given my problems Friday night, but I have no way of knowing for sure.
    The ipod is a 5g, 30gb, that I purchased new in December of 2006. I am running itunes 9.0.3 on windows vista home premium. Let me know if more details of my hardware/software are needed.
    Thanks,
    Lindsay

    You're not alone. I am having similar problems with my Ipod 5th gen 30gb.
    When I connect it to my laptop (Vista - basic) it is not recognised by itunes. Itunes simply locks up.
    So far I have tried the following to no avail:
    Checked my pc's device manager - it recognises the device and says it is functioning properly.
    Checked the drivers to make sure they are upt to date.
    Uninstalled & reinstalled a previous version of itunes (as it worked fine before the latest release).
    Reinstalled the latest itunes.
    Reset the ipod.
    Put the ipod into disk mode and reconnected to itunes.
    Have tried to use the windows tool to scan and fix any bad sectors but it fails to complete a scan without locking that up as well.
    Placed into disk mode when fully charged and then allowed the battery to drain completely. Then reconnected ipod (in disk mode)and it still is not recognised and locks up itunes.
    At this point I dont really want to part with another $300 odd dollars for a new one.

  • My iphone just was updated yesterday and now my calendars won't synch, how can I get this to work again?

    I just updated my iphone4g and now when synching my calendars will not update. How can I fix this?

    System restore can do that, I recommend to avoid using system restore, it can create problems as well as solve them.
    Try deleting the Firefox installation directory and then re-installing Firefox 3.6
    For 32 bit Windows the default location of the [http://kb.mozillazine.org/Installation_directory installation directory] is C:\Program Files\Mozilla Firefox\
    You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Maybe you are looking for