My ipod comepletly froze and ive googled and youtubed ways to fix it! its on recovery mode and when i hold the home and power button it shows the apple button for a second and then it shows recovery mode again! i need help i DONT wanna restore!
My ipod comepletly froze and ive googled and youtubed ways to fix it! its on recovery mode and when i hold the home and power button it shows the apple button for a second and then it shows recovery mode again! i need help i DONT wanna restore!
ive read that alot of ppl are having this problem i need my ipod so if someone can help me ASAP
Here is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it
Similar Messages
-
The apple logo appears for 5 seconds then disappears for 10 then appears for five and so on. I can get it to the connect to iTunes screen but as soon as I unplug it from the wall it shuts off completely. A laptop with iTunes isn't enough to power it up. Can anyone help me fix this?
Awesome. This is the iPhone 4 discussions! Have a nice day
-
Do I need a new Apple ID for my second and third apple computers ....
I just bought a second and third apple computer for my team mates for my business, do I need to have separate Apple ID in order for my emails NOT to drop on their computers ? I didn't think about this before I registered them with apple and now I need to undo this so my emails aren't on those two computers...how do we use the iCloud but also not have my email accounts on their computers.. I just want their email only on their computer
Typically you have an Apple ID for each individual. But if you do this, you can't share documents on the same iCloud account - it's not designed to be used this way.
If you sign in with the same iCloud account on each machine and use iCloud for email/calendar/contacts/messages then YES everyone will see each other's email and calendar, etc.
So you need to use separate iCloud accounts for each machine, and use something else (i.e. Dropbox or Box) to share files. -
help me
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
When I go to some web sites, my apple freezes for several seconds and then responds
I try to go to certain sites and my mac freezes and then responds. This is happening more frequently.
I've experienced this too, it always seems to be caused by flash content. Mine happens intermitently so haven't really found a solution. Are all your plug-ins up-to-date? And are you running any sort of ad-blocker?
-
The calendar icon on my iphone 6 shows that I have 2 items in my inbox but when I click on it it takes me to the full year calendar, at bottom of screen it says Inbox (2) - when i click on that the screen goes black for a second and then defaults back to the home screen. Have tried everything, rebooting, reinstalling, refreshing - very frustrating - can someone help?
ThanksTry This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Why do my raw images (fr Nikon d800e) show up bright for 1 second and then darken in Aperture?
I'm new to this site so I apologize for the long question. When I import raw files from my Nikon D800e into Aperture (3.2.3), they show up bright for one second and then darken slightly. Is this normal? It didn't happen with raw files from my Nikon D300. I have to adjust the brightness and exposure to make them bright again. thanks, Mike
One of the changes in Aperture 3 as it has evolved, is to first use the Preview generated by the camera. It waits to generate its own Preview until you actually click to display that one image. Until then the thumbnails are based upon the camera provided JPEG Preview.
In earlier versions, you never saw that, but only the initial Preview generated in Aperture. It is not because of the different camera.
Btw, if you are using 10.8.2, why have you not updated to Aperture 3.4.3?
Ernie -
my ipod touch wont turn on! i pressed the power button and the white apple logo appeared for five seconds and went to a black screen, and then back to the logo for 5 secs and back to the black screen for 5 secs. im not touching my ipod and it is still doing this. i did leave it onover night to update ios, is this why??
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipod 4gen keeps rebooting for 9 seconds then stops for 4 seconds, and it keeps repeating this, how do i get it to stop?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hey, i just got the iPhone 5s and when i unlock my phone the clock on the lock screen shows up faded for a second and goes away is this supposed to happen
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first.. -
I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time. What should i do????????????????????????????????????????????????????????????????????????????? /
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears. Then I click on it and for photos is a triangle with an exclamation point. It doesn't happen to all but quite a lot. how to I get them back
Have you recently deleted photos using the finder or run clean up software? Is so restore your backup
If not the backup your iPhoto Library and launch iPhoto while depressing the option and command keys. Rebuild your database
LN -
when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?
Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed -
Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W. -
my ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an update soon to correct this, i just wanted to see if anyone else was having the same problem.
wen i open ipod in my iphone ,, it gets stuck ,, and get backs to the menu ,,, and doesnot play anything ,, not video nor songIf your phone is not officially unlocked by the carrier in the UK, you can not use the phone using another SIM, unless you modify the software or the SIM, which can lead to unexpected results, such as non functioning apps.
Unauthorized modification of iPhone OS has been a major source of instability, disruption of services, and other issues
Problems resulting from those modifications can't be discussed in these forums, due to the Terms of Use
Maybe you are looking for
-
How to Retain Graphic Equalizer Settings?
When I click on the Graphic Equalizer icon in FCPX (under Audio Enhancements in the Inspector for a selected audio clip), it always opens up with the default settings for the selected Equalization mode even if the mode isn't changed. The documentati
-
How to limit bandwidth for guest per connection/user on 2504 WLC?
We have 2504 Controller with 24 AP's registered in a hotel and we would like to limit bandwidth per connection or per user. I went to QOS Profiles > Bronze > I do not see Per user Bandwidth Contracts(K)* instead I see WLAN QOS Parameters with below o
-
Pr cs6 xmp files missing upon project open
hi all, i'm using pr cs6.05 on mac osx 10.8.5. when opening a project file i've already worked on, premiere is asking me: Where is file '00006.xmp'? i'm using avchd footage in mts containers. so i navigate to the nested STREAMS folder where the 0006.
-
Installing PC Suite on PC - Error message 1500
I am having difficulty installing PC Suite version 6.8 on my pc. I keep getting an Error 1500 message when downloading the software. I started to download it once and it froze my computer so i shut the computer down and restarted. Now when i try and
-
HP DX2450 Microtower slow boot to POST screen.
Hi all Product Name and Number: HP DX2450 Microtower PC Operating System: Windows 7 Pro 64bit When I power on the PC, it takes the computer roughly 20-30 seconds to get to the POST/HP menu screen. After that, it boots into Windows 7 pretty quickly a