My ipod has been dropped and dented on the side and screen cracked. after i replace the screen will it still work?
any ideas?
Dropping an iPod + a dent on one side is no big deal at all
It can be a bid deal if the size(dimensions) of the iPod has changed. Although chances of that happening are very less or even 1 in a million; so you can very well go ahead and replace the screen.
I am taking into consideration that the touch function still works - even with the shattered screen!
Good Luck.
Please rate helpful posts. Thanks!
Similar Messages
-
Itunes will not recognize my Ipod Nano 5th g. It shows up on my computer. But Itunes gives me a message that says "An ipod has been detected, but it could not be identified properly. I did all the steps in the ipod assistant. Unistalled and reinstalled drivers and itunes. restarted ipod and even erased everything. It is recognized by other computers. And itunes recognizes my iphone fine. please help.
Have you restarted your computer? iTunes updated?
-
My iPod has been lost for about a month now and I wanted to know if I can find it using the serial number because I don't have iCloud set up on my ipod
No.
You cannot.
Sorry -
If ipod has been dropped in water, will it ever work again?
If ipod has been dropped in water will it ever work again?
Maybe. Do not use or charge until it is dry. Dry using the instructions here:
How to fix a wet iPod or iPhone | eHow.com -
i have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz
Sounds like you broke it.
-
My ipod has been disabled for 22,777,704 mintues and when i try to restore it is says it cant be restored because the ipod is locked. there is no where to enter the password. i font have the computer it was originally synced with. help please!!
Hi saraali,
Follow the instructions in the support article link below that best apply to your situation:
http://support.apple.com/kb/HT1212
Cheers,
GB -
I've been told to set my fourth generation iPod touch to recovery mode by turning it off, and holding the home button down, but my home button is cracked along with the bottom of my screen, so I have no way to do so.
If anyone knows of a different way to reset a disabled iPod, please help.
I logged into the iTunes account and it says it can not load because my iPod has a password.
Yes, Apple, my iPod had a password; which was forgotten, and is the reason why I'm here in the first place.
I hadn't downloaded iOS 8 yet, so the support system is rather useless. Help?A 4th gen iPod can not be upgraded to iOS 8. 7.0.2 is the high version it can run.
-
HT3204 An ipod has been detected but can not be idenified
Help Needed....I have an issue with my iPod/iTunes. When I plug it in, iTunes pops up a message that says "An iPod has been detected but cannot be identified properly.". We have followed all the troubleshooting directions with no luck. Anybody?
We have followed all the troubleshooting directions with no luck.
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
RUN the EXE OR JAR, if the file has been dropped to EXE OR JAR
My requirement is to run my application Executable OR Jar, if the file has been dropped to that executable OR Jar and can show the file name which has been dropped.
Thanks-
Ashish Pancholiwe would like the user to be able to pick a file from native file system and drag & drop it to our application icon and have it uploaded to server
We have an existing java desktop application which starts, when user click on our application icon (placed on desktop) OR double click on executable(.exe). It opens the frame which allows user to select the file from native file system and uploads it to the server.
Now we would like to facilitate user, that he can pick a file from windows explorer and drag it to the application icon & drop it on the application icon on the desktop. This would start the uploading of that file on the server.
We are using JSmooth to build an executable from jar. I would like to know..
How we can launch the application if user drops local file onto the system icon ?
How we get the absolute path of file name which has been dropped onto the executable ? -
HT1212 Need help ipod has been disabled won't let me conect to itunes
Need help ipod has been disabled what do i do?
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
-
How does one get an iPod nano to turn on other than the "normal" way? This one has been dropped and all I can get is a blank screen. I have tried holding down the HOME button to restart it but no go. When I connect it to my computer, I am told to enter the PASSCODE which I cannot do as there is no touchpad.
David ..
Your topic refers to an iPod touch
Then you say: How does one get an iPod nano to turn on ......
If it's an iPod touch, try a reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, whether it's an iPod nano or touch, it probably needs service > Apple - Support - Service Answer Center -
Error message: ni: A frame has been dropped and the acqusition has been canceled
I use a NI PCIe 1433 framegrabber with a Basler spl4096-140km line camera.
Using triggered acqusition with an external source, I can get a framerate of 68500Hz in NI-MAX.
When I use the Matlab image acquisiton toolbox to acquire data, I however very often get the error message: 'ni: A frame has been dropped and the acqusition has been canceled". This happens even at much lower framerates (20kHz) and only seems to go away when acquiring data slowly.
Computer is a Dell Precision 7600 and I assume there should be no issues with RAM or the PC being slow. The error does not go away when reducing the data size (i.e. reducing the ROI to one single point that is readout).
Do you have any pointers why this error message appears and what can be done about it?
Thank you!
RetoHello,
I encountered the same problem and I think it is because the allowcation of storage in matlab cannot catch up with that of the camera so that it will drop frames when the buffer is full.
I also want to know how to solve that.
Yang -
I have had bad luck with electronics lately my computer got lost to water and cant be fixed now my Ipod has been stolen I reported it to Apple but now I need to know when I get a new one how can I get back my music and games etc. if I can get it just with my account
What kind of iPod are you getting to replace it? If it is an iPod Touch, and you are in the US, after you set up the Touch you can use the iCloud beta and download your previous music, books and app purchases directly to your Touch.
-
i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
I lost my iPod it's almost been a week now , but I've been using find my iPhone to track it. Recently it showed that my IPod has been offline (wifi) now so I've been wondering if there's a way for Apple to turn it back online (wifi)
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
iCloud: Find My iPhone
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
Maybe you are looking for
-
Problem with iChat changing my custom away message after 30 minutes
Lately, I've been having a big problem with iChat changing any custom away message that I put up to "Away" after 30 minutes or so. Is there anything I can do to make it stop? Another issue I'm having is that sometimes when people on my buddy list cha
-
Dear all, I am working on some queries which are using in CRM 7.0. I found most BI queries are 3.X version which are using in CRM. I just wonder how the 3.X queries can be displayed like 7.0 look in BI query? For example, the BW 3.X web template 0T
-
Descendant Style Selector not Working
Anyone know why this descendant style selector does not work? <?xml version="1.0" encoding="utf-8"?> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:mx="library://ns.adobe.com/flex/mx" xmlns:s="library://ns.adobe.com/flex/spark"
-
Benefits of Airport Express wireless printing VS. built in printer WiFi?
I currently use an Airport Express N to enable my old HP laser jet for wireless printing. The HP just stopped working and I need to buy a new one. I'm seeing built in WiFi in some printers today, so I'm wondering if there is a benefit to still using
-
Error message what does it mean?
I have attempted to open Safari on my windows vista based system. However, whe I open it now I get two error messages the first says... "The procedure entry point CFPropertyListCreateWithData could not be located in the dynamic link library CoreFound