My ipod has not been connecting to the computer properly

when I plug my ipod w/click wheel into my imac, the ipod says do not disconnect. After waiting for 5 minutes nothing happens in itunes or on the finder. I cant eject the ipod properly so i have to do i manually. I also can not update or restore my ipod. It has become very frusterating because my whole library is on my old ibook and I cant figure out an easy way to transfer my music to my new imac. can someone aswer these 2 questions?

It has become very frusterating because my whole library is on my old ibook and I cant figure out an easy way to transfer my music to my new imac.
If the iBook has a FireWire port, hook up both machines with a FireWire cable. Start up the iBook with the T key held down, and then use these instructions to copy the iTunes library to your home folder on the iMac. If you will be moving the library to the current location of the iTunes music folder on the Mac, rename the existing folder while iTunes isn't running and stop following the instructions after step 4.
(11012)

Similar Messages

HT1212 My daugther has forgotten the password to her ipod touch. The Ipod has not been connect to itunes before. how do i recover the contents of the ipod?

My dausgther has forgotten the password to her ipod touch. The ipod has never been sunced to itunes. Is it possible to recover the contents of the ipod?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT1212 how do u restore an iPod that has been disabled and has never been connected to the computer

How do i restore an ipod that has been disabled and has never been conected to itunes

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Firefox has not been connected to the server since Saturday so I have no internet access.

no internet access from firefox since Saturday on my personal computer at home.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

My iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!

my iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!
yours sincerly
jackfromsurrey

What I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work

The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.

Hello All,
I am getting below error can you please help me
Error:-
The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.

Perhaps this thread will help you out
http://stackoverflow.com/questions/11453066/error-the-transaction-associated-with-the-current-connection-has-completed-but
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

My iPhone 3GS was recently stolen. I can't find the box and it has not been synced to my computer in a long time. I just use it as an iPod now. I have the IMEI

My iPhone 3GS was recently stolen. I can't find the box and it has not been synced to my computer in a long time. I just use it as an iPod now. I have the IMEI but not the serial number. Is there a way that I can get the serial number using the IMEI number. Thanks

What To Do If Your iDevice Is Lost or Stolen

HT1212 An elderly friend has given me her iPad to"fix". She has entered passcode incorrectly too many times (I now have the correct passcode). The ipad is now disabled,has never been connected to a computer . Can it be opened without loosing what is on

An elderly friend has given me her iPad to"fix". She has entered passcode incorrectly too many times (I now have the correct passcode). The ipad is now disabled,has never been connected to a computer . Can it be opened without loosing what is on it?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Forgot passcode to iPad. Has not been connected to itunes. Tried to erase from "find my phone". But it is offline. Tried to restore it. But itunes said it couldn't because it had a passcode. How do I fix this?

Forgot passcode to iPad. Has not been connected to itunes. Tried to erase from "find my phone". But it is offline. Tried to restore it. But itunes said it couldn't because it had a passcode. How do I fix this?

Them try:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

"This message has not been downloaded from the server" - Multiple devices all using Exchange Active Sync

We are having this issue across multiple IOS devices ranging from IOS version 5.x up to the latest 6.1.2. Many (not all) emails sent to the devices are unreadable and simply state: "This message has not been downloaded from the server". Microsoft believes this to be some sort of bug with the IOS devices in the way they are handling the SSL encryption.
Facts:
- Devices are connected to an Exchange 2010 SP1 Rollup 6 via Active Sync (No POP3, IMAP or SMTP)
- issue occurs on multiple IOS devices within the organization ranging from IOS 5.x up to the latest 6.1.2
- Issue occurs on both external cellular data and internal wireless networks
- Not all emails sent to the devices result in the error, but issue does tend to occur more frequently from certain senders/domains
- Using the same user account on an android phone does not result in an issue (even when receiving the exactly same email that has been sent to the IOS devices)
- Closing mail app / rebooting device does not resolve the issue
- Doesn't appear to matter what the mesage format is (can be html, plaintext, etc)
- Spent nearly 7 hours with Microsoft going through the Exchange server configuration and looking for possible causes. None have been found and all testing indicates things are setup correctly.
- This is not a case of Issue 2.3 listed here: http://support.microsoft.com/kb/2563324 (verified by Microsoft Support)
- If we disable SSL on the IOS device and connect via plain HTTP the messages are displayed correctly!
- If we use a different SSL certificate, the issue still occurs - so not a problem with the original cert.
Does anyone have any suggestions on what would cause this? Does the ISO devices have any sort of log that would indicate why it's reporting this error? The current error is pretty unhelpful.

GFI Have a solution for this problem. It is to do with iOS implementation of reading the message headers when SPF compliance modifications are made by GFI.
http://kb.gfi.com/articles/SkyNet_Article/Error-This-message-has-not-been-downlo aded-from-the-server-when-downloading-messages-to-an-iOS-device?retURL=%2Fapex%2 FSupportHome&popup=true

RTC-5230 - Location DEV_LOC has not been registered by the current user

All,
We have recently migrated our dev environment to new hardware and I need to change the OWB Location details to reflect this - I am now attempting to unregister the locations in the Control Center but am getting the following error:
RTC-5230: Location DEV_LOC has not been registered by the current user
Is there a view I can use to find out which user registered the Location?

Look at this thread (steps for unregsitering location)
Re: Unable to connect control center and start runtime service
Regards,
Oleg
PS. Before using unregister_location.sql script unregister this location in Warehouse Builder Browser (Locations Report section).
This prevent from displaying error "Location ... is registered in this repository" during execution this script

I am getting this error message when I open Safari. How do I make it go away? "Error Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(. As a precaution, it has not been loaded. ?

Error
When I launch Safari on my MacBook Pro
Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(. As a precaution, it has not been loaded. Please contact the plugin developer for further information.
I am getting this message when I open Safari. How do I make it go away?
Thanks, Ed Williams

To Remove plug-in
1.) Open the SplashID desktop app
2.) Navigate from Menu bar "File" -> "Plugin for Safari" -> "Uninstall".
I could not find it in either Library/Internet Plug-ins nor ~/Library/Internet Plug-ins as others have suggested.
Cheers!

I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, I get stuck in the same loop and can't sign in!

I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!

If you want to use it, click Review and check your account information. Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.

Apple id has not been used with the itunes store-please review your account information

Hello,
Good Day.
I bought apple ipad 2 and need help.
I registered online and after this i am getting the error.
apple id has not been used with the itunes store-please review your account information
Can any one help me in this issue.
Thanks&Regards,
Shankar.M

This is information you you have created an apple id.
To use this apple id for the itunes store, you have to agree to the terms and conditions and enter in the requested information before you can use the store.
When you create an apple id it does not mean you gain access to all apples features, you would need to create a :-
Itunes id
Facetime id
Game centre id
imessage id
icloud id
You can use the same email address as each login. but until you agree to each terms and conditions you wont be able to access the services.
This is usually done the first time you access each service and sign in with your apple id.
As to iTunes you need a little extra as they will request to confirm details as to address, etc, with the payment information they can confirm you are actually in that country you are trying to purchase from.
Once you have added the credit card details, you can go back in a set payment method to none and remove the credit card details once you have activated the itunes on your apple id.
Basically this message you are getting is just ADDING the feature of iTunes store to your apple id, and confirms you have not got a iTunes id yet.

U2018Ea unit of measure has not been created in the language ES u2018in srm

Dear Friends,
I have checked in ECC & SRM in table T006A (UOM languages). UOM "EA" is defined in ES (Spanish).
Also in comm_hierarchy also i chked for product category language maintenance and found maintained in EN,ES languages.
u2018Ea unit of measure has not been created in the language ES u2018
I have tried with sapanish (international sort,dominic,traditional sort)& rest of spanish spoken country languages but i am getting the same error.( IE- tools-general-languages & refreshed the page). u2018Ea unit of measure has not been created in the language ES u2018
Regards,
William

Hi Willam,
When are you getting this error ? i.e. while creation of shopping cart or process purchase order..
I believe this issue is due to creation of UOM..which means EA UOM should be created with EA language.
For further details please have a look on
http://wiki.sdn.sap.com/wiki/display/SI/UnitofMeasurerelatedsettingsinSAP
where they have specified that "Maintain UOM in different languages by logging to the system with different logon language"
Kindly confirm.
Thanks
Rajesh K

My ipod has not been connecting to the computer properly

Similar Messages

Maybe you are looking for