My ipod is dead. I have tried resetting but to no avail. I have attached to itunes and it sees that the ipod is bad, but it still can't seem to work. How do I get it fixed?
My ipod is dead. I have tried resetting but to no avail. I have attached it to itunes and it sees the ipod is bad, but it still can't seem to work. How do I get it fixed?
Its probably just as you said, it's dead. I mean the battery.
I have a second generation iPod and the battery doesn't hold a charge long. So yours must be really struggling with the battery.
You can send it off for a battery replacement, or as is expected due to the cost of doing that and with standard manipulative business thinking, you could just get a new iPod like a good little customer.
Similar Messages
-
my ipod is frozen. Its stuck on the picture of the ipod cord and an arrow pointing to the ipod symbol thing. I try plugging it in and it says that because its locked with a passcode it can't do anything. How do I get it unfrozen?
This will help: http://support.apple.com/kb/HT1212 : iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
-
I have an ipod classic 120gb. The other day it just quit working after I downloaded an ebook to it. I have tried 3 different computers with 3 different operating systems (Windows 7, Vista and XP) and I have received the same response from all after I hooked up my ipod to itunes (running latest version). The message comes back that the ipod has been corrupted and needs to be reloaded. I downloaded the software and it appears to be loaded onto the ipod as I get a message back that it is restarting the ipod. However, after this "restart", it just appears to die and is never recognized by itunes. I do a safe disconnect from Windows, closed itunes and bring it up again, but it does the same thing. The ipod does show up in my Windows control panel.
I feel like I am lost in some continuous vicious loop, any suggestions out there? Thanks....You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.
-
Hi i'm trying to restore my iPod classic and it says that the iPod could not be restored. An unknown error occurred (1434) what can i do to fix this? Thanks
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015 -
I purchased Lightroom 5 in December 2014. It was my understanding that I would get free upgrades when new versions come out. I attempted to download LR 6 and it said that the download was happening but there was no progress bar showing. I left the downloading screen open for 3 hours but nothing happened.
Robert,
You can purchase Lightroom 6 as a part of the creative cloud photography package, part of creative cloud, as a stand alone product or as a product upgrade.
If you purchased lightroom 5 as a perpetual product rather than the creative cloud, you would need to purchase an upgrade to Lightroom 6. Udpates are free for stand alone versions, but upgrades need to be purchased.
If you need to purchase an upgrade to a perpetual license that you downloaded or purchased at a store, see this link: Products . Scroll down to lightroom and click "buy". Click on the selectable text by " I want to: "and select "upgrade".
If you are trying to install Lightroom CC 2016 as a part of a creative cloud subscription, you should be able to download and install Lightroom CC 2015 from the Creative Cloud site. Since Lightroom CC is a new product, it will not show as an update in the Adobe Application Manager. Instead, press the install button next to Lightroom in the Application manager. If you don't see "install" by Lightroom in the application manager, please first try signing out and back in: sign in and sign out of the Creative Cloud desktop app
If you still have issues, see option 2 in this link:
Lightroom doesn't launch or quits automatically after splash screen
Regards,
Pattie -
Home button stopped working how do i get it fixed?
Ipod touch home button stopped working. How do I get it fixed?
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
Hi there!!...my ifone4s is no longer producing sound of any description with the exception of the earphone jack!!! I am running iOS 6.1.3....i have tried reset,restart and restore----no joy....i have cleaned the dock port and speaker and mike area ----no joy! Now my question,,,is this a hardware malfunction or a bug from the iOS???..this is a replacement fone (march 2013) my previous fone suffered a wifi antennae breakdown after an iOS update!!,,,covered under warranty...this fone is now given trouble,,is this fone covered under warranty surely li should get more than three months outta my new fone - no???...any advice or help from anyone will be greatly appreciated especially as regards warranty...thanks in advance for looking...
If you use eabuds or headphones on occasion, try inserting and removing the earbuds/headphones several times in a row.
An exchange under warranty remains under the same warranty period as the original purchase. If an exchange under warranty is provided within the last 90 days of the warranty period, the exchange includes a full 90 days of warranty coverage. -
I did the latest update to my I pad 2 and lost Safari . I was instructed to switch the Java script on which I did but Safari is still not working properly . how do I get everything back after this software update.
Try a reset: hold down the home button along with the power button until you see the Apple, then let go.
-
I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.
Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy -
I used Organize Bookmarks to put some bookmarks in folders. When I had done all the bookmarks that appeared outside of folders in the Organize Bookmarks window, I closed it and looked at my bookmarks menu. Under my folders were some other bookmarks that I hadn't seen in Organize Bookmarks and when I used it again, they still weren't visible. Therefore, I couldn't move them into folders.
Update - I discovered that the entire list of bookmarks can be accessed in the Organize Bookmarks window by clicking on the icon for Bookmarks Menu.
This seem like odd interface behaviour to me.
All the other software I use follows the pattern that an icon with a triangle to the left, which you click on to expand the menu tree downwards, shows the entire contents of the category when you click on the triangle. In other words, you don't get a different response by clicking on the icon from what you get by clicking on the triangle.
It also seems odd to me that when an unsorted bookmarks folder is automatically provided that unsorted bookmarks would not be placed there by default.
Anyway, by getting the list of bookmarks displayed this way I was able to simply right-click on items in the list and delete them, as I thought I should be able to do. Problem solved. Organize Bookmarks interface found to be somewhat unintuitive. -
I updated my itunes and lost my entire library. I found it again as a .xml file
How do I take this file and get it to look like my library used to?
(I am dumb with computers and need step by step instructions)
Thanks!Se my response on this post:
] Screen Message"File iTines Library.itl cannot be read because it was created by a newer version of iTunes" What is this and how can it be fixed?
They do not appearon the right-had side of your post. -
I need to make t shirts for a family reunion. I cannot reverse the text (so the letter will print on a T shirt correctly). I have tried everything including u-tube videos. I could swear I have seen graphics (such as various banners on Word Art as shown on u tube videos) on one of my toolbars but cannot locate them now (would like to use them also).
Is anyone familiar with Microsoft for Mac 2011? I also have an HP Photosmart printer that should be able to reverse print but that too is defeating me but I don't give up...
Thanks for any suggestions!For any object (photo, WordArt, etc.), right click on the object and choose Format Shape. Choose 3-D Rotation in the left column. In the X field, type 180 and press tab. Click OK to accept the change. Here, I reversed some WordArt text.
-
I have tried restoring purchases and looking to download it from the iCloud and iTunes but I can't find my audiobooks.
Hi there,
If you backed up to iCloud, you may want to review the article below.
iCloud: Backup and restore overview
http://support.apple.com/kb/ht4859
The following items are not backed up to iCloud. You can sync these items with a computer using iTunes:
Music, movies and TV shows not purchased from the iTunes Store
Podcasts and audio books
Photos that were originally synced from your computer
Hope that helps,
Griff W. -
Somewhere along the way my App Store got switched to the u.s.a. Instead of Canada, how do I get it back to Canada? I'm on an. iPad.
Solved the problem thanks!
-
i just bought a macbook air. ive been transfering all my songs from my external harddrive that i had on my previous laptop for itunes. now that i got them transfered. my itunes wont open. it says "the itunes library file cannot be found or created. the default location for this file is in the itunes folder in the music folder." what do i do!?!
How did you move the music? You have to do it in a specific way:
iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
Quick answer if you let iTunes manage your music: Copy the whole iTunes folder and all its subfolders and files intact to the other drive. Start iTunes with the option key held down and guide it to the new location of the library.
Maybe you are looking for
-
Insert statement not working when Interface is run through PI ..
Hi Every one, There is an interface(Server proxy) which updates a ztable in the program. Updates are happening when we are running this interface manually(putting Payload manually) but in case there are already entries in ztable and we are trying to
-
Is there any datasource available to pull data from NAST table?
The field I am trying to pull out of NAST (Message Status) table is NACHA. Please provide me hints if any Business Content Datasource uses this table or we have to create a custom extractor for the same? Regards, Joy
-
Power Mac G4 M5183-Can this computer be rebuilt with better hardware?
I recently found my old Power Mac up in the attic, I was courious if I could rebuild the desktop or is the case of this G4 only compatable with its specific hardware. Will the G4 Quicksilver hardware work? Is it even worth trying to rebuild?
-
hi experts.... in lsmw scenario while i am recording transaction XD02_REC it not accepting and giveing message as enter a valid value?
-
I'm currently working on a rather large program that will simulate the buy and selling of stocks on the stock market. I want to add in the ability to use commissions rates. I plan on using the commission rates from several different banks and let the