My iPod is getting stuck in the final stage of updating.

it keeps saying "waiting for ipod" and the ipod has a picture of the ipod cord saying "plug into itunes". When I plug it back in to itunes, it just says the same thing, "waiting for ipod". But it's stuck and I can't use it at all. PLEASE HELP!

Go to iTunes/Edit/Preferences/Devices and delete your latest backup. iTunes has to be able to read your backup in order to replace it, if it can't be read, iTunes will stop at step one, which is backing up the device.
You can copy your purchased items to your computer without syncing. Right click on your phone in the device list and choose
Message was edited by: Ingo2711

Similar Messages

  • I try to sync my iPod with my iTunes and it gets stuck on the "verifying" stage. Not sure what to do.

    I have a iPod classic that I got at the end of 2009. I haven't had a problem with it until now when I'm trying to sync some new songs onto it. It asked me to register it, so I did and updated my iTunes as well. Now when I try to sync my iPod it gets stuck on the "verifying" screen and doesn't do anything. Any help with this would be greatly appreciated.

    Hello brainiac08
    Typically that error occurs because of a backup issue. Check out the article below to resolve it.
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/ts2529
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My ipod touch gets stuck on the same song, even after I uncheck the loop button.  I am trying to play it in my 2007 vw with a power adapter that allows it to charge and play through my navigation unit. Please help.  Thank you.

    My ipod touch gets stuck on the same song, even after I uncheck the loop button.  I am trying to play it in my 2007 vw with a power adapter that allows it to charge and play through my navigation unit. Please help.  Thank you.

    Yes, first try deleing both songs.
    If still problem
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, ,make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • What to do when my ipod touch gets stuck on the apple logo?

    My ipod is stuck on the apple logo what should i do.I tryied restoreing it but it still gets stuck.

    Try holding Volume-Up button down when booting. Do you get to Home screen?
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • My ipod keeps getting stuck on the circle turning on

    my Ipod wont turn on to the unlock screen it goes past the apple logo and goes into the swirrley circle thingy and keeps beeping! Ive tried hitting the home and the unlock buttun and it all doesnt work PLEASE HELP and I dont do my apple stuff from the computer its all on my iPod

    Try here:
    iOS: Not responding or does not turn on

  • I have an Apple ipod that gets stuck on the first track of every album, can you help please?

    I have an Apple Ipod model MC 688. My problem is that every track played 'sticks' , if I forward it sticks on the next track, just plays the same one over and over.
    Very frustrating, can you help please?

    "Sticks"
    Do you mean the same song repeats? If so, turn off the repeat (1) song feature.

  • HT1386 I have an iPod 5, IOS 7.1 and Macook pro OS Maverick, i've updated my iTunes but when I want to sync my iPod it gets stuck on the 5th step "Waiting for changes to be applied" I let them at night for about 8 hours but the syncing hadn't done.

    This problem has been happening for the past 3 months. Please help me.

    Try:
    "Waiting for changes to be applied": Apple Support Communities

  • Desktop Manager 5.0 got stuck at the final stage during installati​on

    Hi, I am trying to install/upgrade desktop manager software from 4.7 to 5.0. It started smoothly, got installed but the last window got stuck at "setup window, which says"Please wait while stup loads, it may take several minutes'. On the other hand software has been upgraded.

    Hi and Welcome to the Forums!
    I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
    1) Remove your device OS update package from your PC (add/remove programs)
    2) Cleanly uninstall the RIM DTM software:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    3) Get a fresh download of the RIM DTM software:
    http://na.blackberry.com/eng/services/desktop/
    Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
    KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
    4) Download (to your PC) a fresh copy of your device OS package from your carrier:
    http://na.blackberry.com/eng/support/downloads/dow​nload_sites.jsp
    5) Install DTM to your PC
    6) Install (also to your PC), the device OS package
    7) Start the organizer configuration over:
    KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
    Hopefully that will get things going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My ipod touch is stuck on the restore picture and when i try and sync it to itunes i cant sync to itunes because i have a password on my ipod touch and i cant get to the main screen so how do i reset my ipod ?

    my ipod touch is stuck on the restore picture and when i try and sync it to itunes i cant sync to itunes because i have a password on my ipod touch and i cant get to the main screen so how do i reset my ipod ?

    Connecting in recovery mode will help: http://support.apple.com/kb/HT1808

  • My ipod nano 4th generation will not turn on when i rstart it it gets stuck on the apple icon screen what do i do

    my iPod will not turn on when I charge it or restart it it just gets stuck on the apple icon screen what do I do to fix it

    Hello crimsonflare,
    Try this first:
    Apple - Support - iPod Troubleshooting Assistant
    If that does not work, use this:
    Putting iPod into Disk Mode
    and try to restore you ipod.
    Hope this helps.
    ~Julian

  • Does the warranty count if my ipod touch get stuck on facebook sometimes and it just turned out to home page a lot

    Does the waranty count if my ipod touch get stuck on facebook sometimes and it turns to the homepage... And it get stuck if i click at the pictures...
    Pleasehelp me out...
    Thanks

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...

  • I have a ipod nano 4G, and to sync my music, i have to put my ipod in disk mode. but when i try to turn it on regularly, it gets stuck on the apple logo screen. any idea how to keep it from getting stuck?

    i have a ipod nano 4G, and to sync my music, i have to put my ipod in disk mode. but when i try to turn it on regularly, it gets stuck on the apple logo screen. any idea how to keep it from getting stuck?

    Did you also check under Albums?  All Songs?
    iPod Nano 5th Gen. User Manual

  • I have an Ipod 4th generation that the buttons arent very reliable on, and whenever i try to turn it on it gets stuck on the apple logo. how do i fix it to where i can turn it on and it works?

    How do i turn the ipod on without it getting stuck on the apple logo

    Try this previous discussion
    Turn on without Home/Power Button

  • My iPod Touch turns on, then gets stuck at the boot logo?

    Ok, so i had my iPod Touch 4G since June of 2011. It is currently running iOS 5 and I have never had a problem. I got on the bus this afternoon after school and I tried to turn it on. It would boot, then get stuck at the Apple boot logo. This iPod has never taken damage by anything. If the iPod would be broken (physically), so would my phone, since they are in the exact same spot. I have plugged it into my iHome to charge it, but this morning, the battery was 94%. It was off all day, so the battery wouldn't be dead. Please help, as I had this iPod for the longest time.
    P.S. I also tried Lock+Home to reset, and iTunes will not read it.

    Skunkman wrote:
    Ok, so i had my iPod Touch 4G since June of 2011. It is currently running iOS 5 and I have never had a problem. I got on the bus this afternoon after school and I tried to turn it on. It would boot, then get stuck at the Apple boot logo. This iPod has never taken damage by anything. If the iPod would be broken (physically), so would my phone, since they are in the exact same spot. I have plugged it into my iHome to charge it, but this morning, the battery was 94%. It was off all day, so the battery wouldn't be dead. Please help, as I had this iPod for the longest time.
    P.S. I also tried Lock+Home to reset, and iTunes will not read it.
    In my post, it said iTunes will not read it. But I tried to hold the home button.

  • Tried to restore ipod and it gets stuck at the very end

    please help! i plugged in my ipod to recovery mode to get all the apps off and it gets stuck at the very end of the restore. ive tried it more than five times now please help!!

    Welcome to the discussions,
    did you check your security software settings? http://support.apple.com/kb/TS3125 iTunes needs to connect to the Apple server during the restore process.

Maybe you are looking for

  • Problem with InetAddress.getByName ("......" ).getHostName(); Help !

    basic problem is that IP does not get resolved under Jdk 1.4 SuSE 7.3 the following code resolves IP under jdk 1.3 on the same machine, BUT doesn't resolve under Jdk 1.4 on the same machine. public class MyTest      public static void main( String []

  • Any opinions on loading Salary Survey/Market data to Oracle HR?

    Our choice is to look up each job individually on Salary.com and enter it manually or pull the data from The National Compensation Survey<http://www.bls.gov/ncs/data.htm> and loading it through the API. Any thoughts? If I don't want to buy any of the

  • Conditional Build Tags automatically appearing

    I'm running RH 9.0.2.271 on Win 7, 64 bit machine. I have this procedure in the WYSIWYG editor, and I want to mark the yellow icon (highlighted in yellow below) with the Online conditional build tag (green hash highlight): So, I select that CBT, and

  • Controlling an Agilent E4428C with Labview

    Hello All, We have an Agilent E4428C Signal Generator, and I've downloaded the LV driver and set up the IP address on it.  I can ping it, but I can't see it in MAX.  Are there some instructions on how to set it up for use with LV?  The manual doesn't

  • Photoshop 7.0 crashes

    I am a Photoshop 7.0 user on Windows XP. I have used Photoshop 7.0 for several years with pleasing results. Recently my installed version crashes at the same stage of use. I decided to buy a new program CD and uninstalled the original program. After