My Ipod isn't recognized by iTunes or my computer!!!

My ipod is not being recognized by my computer or iTunes. Instead a message pops up saying "USB not recognized" and nothing works for me. I tried using a different USB port and restarting my computer but the same thing happens. If anyone knows of a way to help me, please answer back this is so frustrating!

Have you been through these at all?
iTunes 7 doesn't recognize the iPod.
Your Windows PC doesn't recognize iPod</font color</a>.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.

Similar Messages

  • I restored my macbook and now my ipod isn't recognized by itunes

    I restored my macbook and now my ipod classic isn't recognized by Itunes... Help

    Have you worked through each and every single suggestion in this Apple support document yet?  If not it would be a good place to start.
    iPod not recognized in iTunes and Mac desktop
    B-rock

  • My 5th generation iPOD isn't recognized by iTunes?

    When I plug my iPod into my computer, iTunes opens, but my iPod isn't recognized. Anyone else have this problem or any suggestions?

    By all of those suggestions, do you mean the ones I mentioned in the paragraph about or the ones in the support article I linked? Does this 5G iPod via still power on?  DId you try connecting it to another PC or Mac to see if it is recognized there?  Did you check the dock connector for any signs of debris or damage to the pins that could be preventing a connection to your PC?
    Any idea how long the average iPod should last? Ours if from 2006.
    Most people never get the iPod to last 6 years, so consider yourself lucky. That's quite a time span!
    B-rock

  • HT1353 2nd gen iPod isn't recognized by iTunes nor Windows - What to do?

    I have an iPod A 1019 (2nd gen?). When I connect it to the firewire connector on my PC, the unit screen shows a checkmark and "OK to disconnect." I tried to reset with Menu + Select (=nothing happened) but Menu + Play works. Still, PC + iTunes won't recognize iPod. Help? I suspect that the software on the iPod itself is too old but since the device cannot be discovered, I can't update it. I tried iPod transfer software, but nothing recognizes my oldie. Sigh.

    Hi, Griff W.!
    Thanks for taking the time to offer me the troubleshooting steps. I tried them all, but unfortunately to no avail. I can listen to the iPod, but once I connect it to my PC with the firewire cable, it still isn't recognized in iTunes or in Windows. I checked the Universal Serial Bus controllers. The iPod is nowhere to be seen. I checked the version of the software on the iPod and it's 1.5. Maybe that's the problem: the software is too old?
    BTW, the firewire cable is charging the iPod.
    Maybe if I could find someone with an old PC that has a firewire port?  But even if I were to make the iPod visible, would I be able to copy the songs onto my new iPod? From what I've been reading probably not. It's really exasperating. They music is legit, copied from my CDs or purchased.
    I am looking at my new superslim iPod Touch 5th generation and right next to it the clickwheel iPod 2nd generation that's more than a cigarette pack sized. Progress. I guess.
    Thanks for helping out. If you have any more ideas, please let me know.
    Best regards,
    D.

  • Classic iPod isn't recognized in iTunes / Cannot Sync

    My iTunes is up-to-date with 12.1.1 version.
    I have a Classic iPod that was working fine until the last 2 updates.
    Now it's not recognized and, therefore, won't sync.
    Here is what happens:
    (1)  Open iTunes.  It freezes
    (2)  Finally opens.  Plug in Classic iPod.   Sometimes icon shows sometimes not.  Have to often manually eject (Windows 7 won't let me as 'it's in use').
    (3)  Once finally showing.  Try to Sync.
    (4)  Get error message stating computer isn't authorized.  (Have already deauthorized and reauthorized several times).
    (5)  Then get message with 2 other UserIds that they need to be authorized or I will lose 40 songs.  (Have authorized those as well).
    (6)  Then get error message that device isn't recognized.  I have run diagnostics in iTunes as well,  Device isn't recognized.
    I am fairly computer savvy, but not a computer expert by any means.  I hope that this is an easy fix.   I am concerned my iPod has outlived its time with all of these new updates.  Also, wondering if there is a driver or something I need for my iPod. 
    Would appreciate any help I can get.  Thank you!

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    Microsoft Support - A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • HT2292 iPhone isn't recognized by iTunes on ANY computer

    Ok so....
    I updated iTunes on my Windows 7 computer and since then, my iPhone 4 isn't recognised by iTunes.
    I tried resetting my iPhone which made things worse as now it isn't recognised by iTunes on ANY computer (Windows or Mac)
    and as it is running an old version of iOS and has been reset, I cannot use my phone because I need to activate it with iTunes which wont recognise it!!
    PLEASE HELP!!!!!

    Put the phone in Recovery Mode and restore:
    http://support.apple.com/kb/ht1808

  • New ipod, ISN'T RECOGNIZED BY ITUNES

    I ordered a new video ipod (my old one is a generation three). When I plug it into the computer, it's recognized by my computer, but not by iTunes. I also got a new laptop, and I want to transfer the songs I have on my iTunes onto that computer using my new ipod. I tried manually copy-pasting the songs from iTunes into the ipod, but when I turned on my ipod afterwards, it didn't show the songs in the traditional menu setting. Can I still use the songs, just doing some kind of manual transfer onto my new MacBook, or is there some other way for me to do this that I'm missing?
    Also, when I ask iTunes to do random shuffle, it isn't random at all (aka: five songs in a row from the same album, followed by three songs from another album all in a row, etc). I have it set to smart shuffle being least likely, and refresh does absolutely nothing. Plus, today my internet on my (not-wireless friendly) desktop is down, so no iTunes updates in sight.
    PLEASE HELP!

    http://docs.info.apple.com/article.html?artnum=61711
    Read this and it will help you get iTunes to see your iPod.
    To move your music to your new Computer is easy. You can read this http://docs.info.apple.com/article.html?artnum=300173 or easier yet, try a third party software program that will let you rip your iPod onto your new laptop. Since you have a MacBook, you will need one that will work with PC and Mac, I do believe. I know a PC formatted iPod will be read on a Mac, just not vice versa. Go to VersionTracker.com and type in iPod. You will see countless programs that will let your rip your iPod onto your iTunes.
    Make sure you have all the songs in your library checked when playing iTunes in shuffle mode.

  • My ipod isn't recognized by itunes

    My ipod isn't being recognized by my itunes account. Every time I plug in my Ipod, nothing happens. My ipod doesn't have the connected screen and doesn't charge, and my computer basically doesn't acknowledge its existence at all. I've tried restarting my computer many times and have reinstalled itunes twice to no avail. Please help!

    i do not know if this works, but i found this in another post:
    I Have An Answer!!! After numerous hours of going through these posts, spending hours going through the trial and error of fixing, an answer has finally appeared!!
    This blog http://echeng.com/journal/2006/09/23/itunes-7-broke-my-ipod-nano/
    Has a solution of changing the disc format thing me jig here it is:
    Start -> Run -> compmgmt.msc
    Drill down ‘Storage’, highlight Disk Management
    Plug ipod in. Wait.
    Make sure the computer management window is the topmost window. If you don’t, you won’t be able to get in there and change the drive letter of your ipod. The ipod will disappear out of the computer management window once itunes rejects it, or accepts your acknowledgement that it’s rejecting it.
    Then I think i right clicked on the volume (or something) and changed the drive letter.
    Just to make sure windows remembered my change, I ejected the pod and plugged it in again. Looks like it was mapped to the letter I had specified. Don’t know if this setting will hold after a reboot/cold boot.
    You may want to scroll through the comments- For vista instead of run go straight to control panel, system and maintenance scroll to the bottom and create and format hard disk partitions, plug ipod in put it as G and hey presto!! hope this works for others.... before syncing with ipod if all this works you may want to download music rescue (brilliant and reliable used it a few times!) and copy all your music from the ipod after formatting.
    Really hope this helps someone out there as it did me and looking forward to hearing if it has.

  • IPod isn't recognized by iTunes and iTunes opens very slow!!

    Hey!
    So here's my very urgent problem (go on vacation tomorrow!!!):
    Everytime I click to open iTunes, it takes about 5 minutes until it opens! I have a Windows XP and have also updated iTunes to the newest software. I don't know what the problem is...
    And second, my iPod doesn't connect with iTunes, it won't be recognized by iTunes! Windows recognizes it, but iTunes doesn't. I've already tried at every USB connection, but it doesn't work! Well, once it worked and I thought that was it, but the next time it didn't work anymore!
    I've got a pink iPod mini (4 GB) and I dropped it some times, but the man in the Apple Support store said, it's got nothing to do with the hardware. Really?
    Who can help me please - very fast??!
    Thank you!
    Chrissy

    Sorry, don't real understand! ;-))
    OK, I closed all other background applications when using iTunes. But the problem is that I couldn't do the next step because iTunes always tell me: "The software required for communicating with the iPod isn't installed correctly. Please reinstall..." So I can't drag the iPod icon from my computer (and anyway: where is "my computer"??) to iTunes application (where is that one??)
    But at least it's good news that nothing's wrong with the hardware (couldn't afford a new one! ;-))
    Please reply soon, it would be real cool if you'd help me with further steps... and everyone else too of course! ;-D
    Chrissy

  • IPod isn't recognized by iTunes (TRIED EVERYTHING!!)

    It still isn't being recognized. It's charing and recognized by Windows, it charges, and it even brings up iTunes when plugged in!

    What do you mean by everything?  Have you really tried all the things on this page? http://www.apple.com/support/ipodtouch/assistant/itunes/  Note that the iPod should be recognized as a digital camera for the purposes of seeing the pictures taken with the iPod camera and it should be also recognized in iTunes for all other functions.

  • My iPod isn't recognized by iTunes and I want to update it but I can't. What do I do?

    I plug in my iPod and it will charge but I have tried everything to get iTunes to recognize it and it won't. I want to update it to IOS 5 but I need the iTunes to connect with it.

    Have you tried here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Ipod isn't recognized by itunes and computer but it still charges

    i've tried a hard reset but that didn't do anything.
    when i plug it into my computer i get a message saying that the USB device isn't recognized.
    so, when i look at it in device manager the ipod shows up as a unknown device
    and the device status says "there are no drivers installed for this device".
    anybody know what to do?

    Your iPod's battery may not be charged. Plug your iPod in, wait for a moment, press a button to turn it on, and check the screen. Here are some easy steps to get the most out of your battery. Note: On recent iPod models, when the battery is completely empty, your computer may not recognize your iPod for up to 30 minutes even though it's connected and charging.

  • My new iPod isn't recognized by iTunes. Instead it's recognized as a camera. I tried everything apple suggested but nothing seems to help. Is there anything ELSE I can do?

    I Tried everything you guys suggested but none of it seems to help.

    What do you mean by everything?  Have you really tried all the things on this page? http://www.apple.com/support/ipodtouch/assistant/itunes/  Note that the iPod should be recognized as a digital camera for the purposes of seeing the pictures taken with the iPod camera and it should be also recognized in iTunes for all other functions.

  • IPod isn't recognized by iTunes and won't let Windows format it

    I have an iPod classic that won't do much of anything. It won't turn on and rarely gets past the apple logo. It it does get past the apple logo though it asks as if you just bought it and asks your language and has nothing on it. If you go into settings though it says that all of the memory it used up. It also has the games on it but if you try to play them the iPod crashes. If I plug it into the computer iTunes won't recognize and and Windows will not format it.
    I do not care about getting any of the previous data on the iPod back I just wish to use it again.

    Hi Pigwarts5ever,
    If you are having issues with your iPod Classic not being recognized by iTunes on your Windows machine, you may find the following article helpful:
    Apple Support: iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    If you are able to get it recognized, your best next step would be to restore it to factor settings:
    Apple Support: Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    Regards,
    - Brenden

  • Ipod isn't recognized by Itunes or Windows

    Hi all,
    I have recently sent my Ipod, which is less than a year old, to be checked over by the Apple technicians as it would not switch on nor be recognized when I connected it to the computer. They returned it saying there was no problem and if there had been, it had been resolved during their tests. Once safely knowing it worked again I ran a virus check on all the content I sync to my ipod and when nothing came up, I put it all back onto my ipod since it had been removed due to apple technician testing. Now the same problem is occurring. The Ipod wont switch on and seems to be in a continuous mode of restarting but not actually doing so. I can't restore the ipod as it is not recognized by itunes or windows, what can I do?
    Thanks for all your help
    Dell Dimension 9150   Windows XP  

    Hi Mark!
    Just checking on something. You've seen all of the info contained on these articles, correct?:
    iPod 101 - My iPod is Sad (or Alarmed)
    iPod displays a folder icon with an exclamation point
    iPod displays a sad iPod icon
    If you've already seen that, then I would suggest that you check out this helpful post by Mitch, another forum member here on the Discussions, about what to do with a Sad iPod icon or and folder icon on an iPod's screen:
    Mitch: Exclamation point and folder and nothing else
    -Kylene

Maybe you are looking for

  • Cannot establish secure connection to Apple Store

    I've tried all the solutions I can find to no avail, but cannot seem to establish a secure connection to the iTunes store.  No error code just a blank iTunes Store screen and a never ending attempting connection.  Some of what I've tried: * Date and

  • Container Variable in Alert Cat

    Hi, I have a FTP To FTP scenario, where I have to handle alerts if any error occurs in PI. For Example FTP Password is changed in the Target system and not updated in the Receiver Channel. Obviously the Adapter throws an error saying the Password is

  • Copy 0025 to 9125

    Hi, One of our customer requirement is to copy the existing infotype 0025 then enhance it. I am new to HR side, dont have much knowledge. Can any one post step by step to copy the infotype, module program, subobjects and if any Configuration changes.

  • User Exits in QA32

    Hi Friends, I need to average out the results of physcial samples for the same batch and update the results in batch classification. For Example for Batch(B1) we have Physical sample (P1), Physical sample(P2) we shall enter the results i.e brix value

  • How can I convert PDF table to Excel table? I'm using Adobe Acrobat Pro X

    Please, Help