My iPod nano 3G no longer plays sound. The only sound is the clicker. What is wrong?

I really want to know what's wrong with it. It is also bent where the charger is. Maybe that has something to do with it?

Yes, I did. All I needed to do was raise the volume from zero to above using the *actual buttons on the side* of the device instead of just the touch screen volume control. If you try to adjust the volume using *only* the touchscreen volume control, the sound of your music and videos will be affected directly as you desire, BUT if the volume control from the *actual buttons on the side* is completely down, the alarm clock will not sound.
I hope this helps. It may not make sense right off the bat but do give it a try.

Similar Messages

  • When on battery power, my IPod Nano it shuts itself off after 2-3 minutes.  Any ideas what is wrong and how to fix it?

    Can anyone help me keep my iPod Nano from shutting itself down after 2-3 minutes on battery power?  It works fine when connected to a power source.
    Thanks,
    George

    Try here to fix it.  I doubt that you will ever find out why it did that.
    iPod touch: Hardware troubleshooting

  • My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    Hello, Pete. 
    Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Usually the resolution is updating the Apple Mobile Device Driver.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • My ipod nano will no longer sync with itunes since i have purchased an iphone 4s and synced it with itunes.

    My ipod nano will no longer sync with itunes since i purchased an iphone 4s and synced the phone with itunes.  When I plug my ipod into my imac, it does not even read or recognize my ipod.  What do i do?

    Are you using the original cable that came with Nano and not your iPhone's cable?  Have you worked through the troubleshooting in this Apple support document?
    http://support.apple.com/kb/TS1410
    B-rock

  • I have a 5th gen ipod nano that freezes when playing songs. i can't turn off, change songs, turn volume down. song stays stuck and nothing works at all. any ideas??

    i have a 5th gen ipod nano that freezes when playing songs. i can't skip, turn down volume, turn ipod off. it simply screeches as the song is stuck at a specific point. any suggestions?

    You have 2 options:  #1 - iPod Repair Tutorials
    #2 - take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.

  • My 4th generation ipod nano backlight no longer working. Any suggestions

    My 4th or 5th generation ipod nano backlight is no longer working.  Any suggestions?

    Hi grecokev,
    Thank you for contributing to the Apple Support Communities.
    You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
    Turn off your computer and your iOS device or iPod, then turn them on again.
    Check to make sure that you've installed all required updates for your computer.
    Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
    USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
    You can find these steps in this troubleshooting article:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
    Best Regards,
    Jeremy

  • New ipod nano stopped working while playing will not even turn tried to charge it still nothing HELP!!!

    new ipod nano stopped working while playing will not even turn tried to charge it still nothing HELP!!!

    Change the rice and dry for another couple of days. Then:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Apple will exchange your iPod for a refurbished one for $199 if 64 GB one and $99 for the other 4Gs.. They do not fix yours.
    Apple - iPod Repair price              

  • Ipod nano 7th gen stops playing in the middle of song

    Ipod nano 7th gen stops playing song randomly while listening. What gives?

    i think i FINALLY solved the problem - by simply switching the wire that connects my ipod to my computer (i was using a firewire, and switched to a usb).
    Did you by any chance have the iPod connected through a hub , or through another device, G?
    Its not uncommon to have issues like this occur if , for example, you have a firewire device equipped with a "Prolific" 3507 firewire bridge . THese are found in many cheap external FW enclosures used for external burners and HD's , for example. The only real solution is to disconnect all such devices to avoid interruptions on the FW bus. (or, at least with the iPod, you can simply use USB2 instead).
    Cheers
    Rod

  • My ipod touch is no longer working with universal dock since downloading the new OS

    I have the Apple Universal Dock.  It had been working fine with my ipod touch.  I just downloaded the new OS and now my ipod touch will not work with the Universal Dock.
    Any ideas?

    Hi grecokev,
    Thank you for contributing to the Apple Support Communities.
    You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
    Turn off your computer and your iOS device or iPod, then turn them on again.
    Check to make sure that you've installed all required updates for your computer.
    Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
    USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
    You can find these steps in this troubleshooting article:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
    Best Regards,
    Jeremy

  • Ipod nano won't sync podcasts from iTunes after I "Restored" the ipod.

    iPod nano won't sync podcasts from iTunes after I "Restored" the iPod.

    If you've read the Technical Specification you will find that the nano can only use Firewire for charging, not for syncing:
    http://www.apple.com/ipodnano/specs.html
    "Charging via USB or FireWire to computer system or power adapter (sold separately)"
    So you can rule that out.
    Have you tried the 5 R's?
    http://www.apple.com/support/

  • I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
    According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
    DRM audio is not effected as this is handled by the native iOS music app.
    As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
    I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

  • My iTunes will no longer play videos/music videos (bought from the iTunes store) since the last update? (Win7 64bit)

    My iTunes will no longer play videos/music videos (bought from the iTunes store) since the last update? (Win7 64bit)

    Guys I have the same problem.
    Since I installed iTunes 10.5 I can't play any of my music videos downloaded from the iTunes store.
    I can play music ok but no videos. I just click on the videos and nothing happens!!
    Help..... is there a remedy???

  • I accidentally dropped by old ipod in the garage and drove over it.  So I bought an ipod nano 7th gen. to replace it.  Can I transfer the itunes from my old ipod to my new one?  I only have about 30.

    I accidentally dropped by old ipod in the garage and drove over it.  So I bought an ipod nano 7th gen. to replace it.  Can I transfer the itunes from my old ipod to my new one?  I only have about 30.

    AAll of your iTunes purchases can be re-downloaded again. Log into iTunes Store, select the Purchases tab for Apps, Music, etc.
    if you've been syncing your old iPod with iTunes, you can restore everything to your new iPod from the old backup.

  • My ipod nano paired twice with my headset and now nothing. The headset states bluetooth profile is A2DP, AVRCP, HSP and HFP whatever this means.

    My iPod nano paired twice with my headset and now nothing. The headset has a bluetooth profile: A2DP, AVRCP, HSP and HFP. I have no idea what this means. My iPod shows the headset ID number but now shows "connection failed"

    Hello zedor6,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/ht1664
    Best of luck,
    Mario

  • We have an ipad two iphones and an ipod nano can we sink all of them to one itunes the items have different itune accounts

    we have an ipad two iphones and an ipod nano can we sink all of them to one itunes the items have different itune accounts

    Did you change the email address or create a new Apple ID?
    If the email address associated with the account was merely changed, sign out of the Apple ID on the devices and sign in using the new credentials.

Maybe you are looking for

  • Problems uploading webpage to website

    Once i have uploaded the page to the website, page is on the server, but can't be viewed on the website. I have used the default flash gallery of LR, with minor layout adjustments. Webprovider says the upload should be done in the www folder in which

  • Error BEA 380001 ... Not able to resolve Please help

    Hi Guys, I am getting an BEA 380001 error and the message is "Invoke JCA outbound service failed with application error" Please help me to resolve this... as i am not able to proceed further. It's urgent. Regards, Archu

  • Alphabetizing "the" and "a"

    In iTunes, sorting by song name results in an alphabetical order where if the first word of the song is "the" or "a" it is ignored, while on my iPod it is not. In other words, all songs whose titles begin with "the" are found with the T's. Is there a

  • Will not allow me to select on under wifi settings

    My phone will not allow me to select on under wifi settings.  It appears faded as if it is not a possibility.  I have tried turning off phone and have tried re-setting network settings.

  • LMS 4.2 Port Status - Porlets

    Port Status Details The following portlets are displayed under Port Status pane: •Link Ports •Access Ports •Trunk Ports These portlets can contain 100 records by default. The Question is: How I can configure to show me these 3 portlets more than 100