My iPod says 20%, and when it's at 10% says it's at 20%.
This has been happening since last year. Every time my iPod Touch 4g is at 20%, it's at 20%, but when it's at 10%, it says 20% battery remaining. (It's an OCD thing)
The % battery is not really accurate on the iPod and Apple does not even provide the readout on the iPod. The variations you see are normal. Just do not use % battery
Similar Messages
-
i bought a ipod 4th gen and when i try login in with my apple id it says my security pin is wrong but its the 1 from the card help!!
Contact iTunes. See the iTunes Store Account and Billing topic of:
Apple - Support - iTunes -
my ipod is disabled and when i connect it to itunes it says that i have to enter my password but i cant because there is no swipe bar so what do i do to fix this?
Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software. -
Please People I need some help.My iPod is disabled and when I connect it to iTunes it says: Itunes could not connect to the ipod because it is locked with a passcode...how can I do it?
Place the iPod in Recovery mode and then restore.
-
Hello,
I recently tried downloading the IOS8 to my iPod 5th generation and when it was almost done the computer said there was an error. Right after that, the iPod shut down completely and now it's on recovery mode. I plugged it in and it said that I had to restore it and update it so I could use it again but it doesn't let me. What can I do? I even did a backup before the update.
I really need help.What happens when you connect to computer and restore via iTunes?
Without knowing that:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a ipod touch 5 and when i was loading to my computer i chose to restore my data from my last ipod which did not have a camera. Then after all my music was uploaded i noticed that all the pictures i had taken on my new ipod had been deleted. I think it may be because i chose to restore my last ipod which no photos on it. I was wondering if there is any way to restore my lost photos?
If you backed up the iPod before restoring it then restore from that backup. See the restore topic of:
iOS: How to back up
Also, if yoo have that backup you can extract the photos by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer -
I just factory restored my iPod 5 touch and when I plug it into iTunes to back it up, iTunes stops responding and closes. This only occurs when the iPod is plugged in, when it isn't, iTunes works fine. I am using Windows 8 and iTunes is updated (as of this posting). Any suggestions on getting around this? Thank you.
Also, when I put it through the Windows diagnostic, it lists an "incompatible program" WHILE my iPod is plugged in.
-
I've forgotten my pass-code to my Ipod touch 4g and when I try to restore and update it on my itunes library the internet connection cuts out so this is not an option. Is there another way to fix this problem? Cheers
The only way is to connect the iPod to a computer with has an internet connection and iTunes and restore the iPod. Use as friiend's computer or make an appointment at ther Geniuds Bar of an Apple store.
-
HELP! My ipod is corrupted and when I try to restore it, I cant.
I have had this ipod about a year and I found out that the file with an exclamaition point means corrupted. Well I read enough on ipod support update my itunes and when that didnt work I tried to restore my ipod to factory settings. Every time I try to restore it a box saying "There was a problem downloading the ipod software iPod "iPod". The requested resource was not found." Please help I am about to give up on it, I have tried since Christmas to fix it.
Ok you got to make sure that you are the adiminstrtor on the computer. After you do that right click on my computer and hit properties. Make sure under the general tab that you are running windows (2000) service pack (4) or Windows XP Home or Pro service pack (2). After you have established that type in on the support search box uninstall itunes and quicktime for windows. Then once you have downloaded itunes restore the ipod and see if this fixes your problem.
-
I lost my iPod Touch 4G and when i found it, it keeps making the noise how do i stop it
I lost my ipod touch 4G and i used Find My iPhone to find it, which worked. Does it just when unlocked Understood its found?
Read here > MobileMe: Troubleshooting the Find My iPhone app
"Your device is no longer locatable" message
If you see this message, Location Services (or Find My iPhone in iOS 3.x) was turned off on your lost device while you were using the app. You will not be able to locate your device anymore, but you can still display a message on its screen, have it play a sound, remotely lock it, or remotely wipe it.
Reporting a lost or stolen Apple product -
i have the ipod touch 4g and one day my battery died and when i went to charge it it told me to restore it. my ipod wouldnt let me go on it, it just told me to connect it to itunes. when i connected it to itunes it told me that it has timed out and wouldnt restore it. please help i cant live with out my ipod
Upgrade your OS.
From the box the ipod came in:
System requirements
USB 2.0
iTunes 10.1 or later6
Mac: Mac OS X v10.5.8 or later
PC: Windows 7, Windows Vista, or Windows XP Home or Professional (SP3) or later
Broadband Internet access required; fees may apply. -
i need help!
If yo mean the iPod will not connect to your wifi network:
Does the iPod connect to other networks?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Help me please, how do i get the disabled frozen screen to go back to normal? the number screen doesnt even pop up so i can enter my password. its just frozen on the screen!!??
See Here and follow all the steps...
http://support.apple.com/kb/HT1808 -
I have a 4th generation 8GB iPod nano and it will not progress past the blank screen with the white apple logo on it. I have charged it fully and tried to restart it by pressing and holding the menu buttons for 3-7 seconds. The devices screen will turn off and then, after a couple of seconds, the screen with the Apple logo will appear again. This screen will remain lit until the iPod runs out of battery again. I have tried plugging it into my Macbook Pro. I have the newest versions of iTunes software and OS X Mavericks. The computer will not recognize the iPod and the device will not show up in the computers list of devices. I looked up the troubleshooting for the device and found out how to put the device into disk mode. I followed the intructions but the iPod would not go into disk mode. The screen still displayed the Apple logo and would not set into disk mode. I fear that I have run out of options. I have come to this forum in hopes that I can still salvage my device. If there is anything I can do, please loet me know so I can try it. If not, I am affraid I will have to go to an Apple store of authorized retailer and have it repaired or replaced.
Try manually connecting the device to your PC in Disk Mode and then restoring it iTunes.
From http://support.apple.com/kb/HT1363
Putting iPod devices with a Click Wheel into Disk Mode
If necessary, verify that your iPod has a Click Wheel.
Before placing the iPod into Disk Mode, verify that it is charged.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
B-rock -
I dropped my ipod classic and i tried turning it back on and it asks me to plug it in. I did so and it said the data was corrupted. I tried resetting it and it said something about fire wire? I looked on the internet and tried setting it to "Disk mode" and plugging it in and trying it that way, but it doesnt come up on my itunes. I tried diagnosing the issue on the ipod itself and I get to the "Accessorize test" and it says I dont have a FWPWR. How can I fix this??
Ok you got to make sure that you are the adiminstrtor on the computer. After you do that right click on my computer and hit properties. Make sure under the general tab that you are running windows (2000) service pack (4) or Windows XP Home or Pro service pack (2). After you have established that type in on the support search box uninstall itunes and quicktime for windows. Then once you have downloaded itunes restore the ipod and see if this fixes your problem.
-
I have an ipod mini 4g and when i download songs it doesnt work!
I have a ipod mini 4g that iv had for about a year and awhile ago i noticed that when i downloaded songs from itunes they worked for a little while then they just wouldnt play! the song name showed on the screen for a second but then it just skipped it and went onto the next song that i downloaded from a cd. i tried deleting it and putting it back on through the library but it did the same thing! what am i doing wrong
All I can suggest is:
iOS: Troubleshooting Messages
Can you receive messages?
Could you send before when connected to this network?
Have you tried when connected to another network?
Maybe you are looking for
-
Mail Sender adapter issue in PO7.4
Hello Experts, We are migrating from PI7.0 to PO7.4, where in we are struck up with an issue of Mail Sender Interface. Here we have a scenario of Mail to Proxy where we are processing attachment(CSV file). But here when I we run the interface mail bo
-
No video with quicktime7.2 on safari 1.3,audio is ok
I have check the plugin, seem ok, preference are ok,filp4mac ok, what else can be done, HELP?
-
HT4236 how do i move (not delete) photos from my iphone to my mac?
I have way too many photos on my iPhone, but I don't want to lose them. The help articles aren't exactly clear, but can anyone help me figure out how to move photos off my iPhone 5 and onto my Mac? I know it's rudimentary, but I really appreciate y
-
Issue using DLL / library function node
Hi All I am using labview 8.2 / 8.0 I am writing a wrapper DLL to convert compex data types of a DLL to simpler ones for labview intefacing. I have read the forums on all related items and could not find a solution. I have cut my code back to basics
-
IOS 5 & Making E-mail adjustments under settings......
I have iPad 2 running iOS 5 and when I attempt to change password under one of my e-mail accounts which I set up on iOS 4.x (Settings> Mail, Contacts, Calendars>), it locks up. How do I remedy this problem?