My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~
My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~
Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Similar Messages
-
Ipod touch no longer charges after update from IOS 7 to 8.1
Just updated the signed iPOD Touch Product Red my son got for his first communion in June from iOS 7 to 8.1.
Update went fine was done while the iPod was connected to the outlet.
HOWEVER: Now the iPOD is flat and he will nog onger charge or startup, tried 2 different cables and two different charging plugs.
Anyone has this problem, what can I do ??????
HELP ????
From BelgiumNot Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Where the cables you tried known to be good? From other posts it appears that the update made the iPod more aware of marginal cables.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Unlock problem after update to iOS 7.1.1
I'm wondering is anyone of you encounter above mentioned problem after update to iOS 7.1.1.
Usually will switch off the phone during sleeping time, today woke up urn it on and wanted to check mail, the screen is freeze when enter the passcode.
Even try calling in with another phone also unable to get through. Passcode unable to key and stop at the 'enter passcode' screen.
After awhile it show the "apple" icon and turn off.
Any solutons to solve it?iPhone is unresponsive and displays the Apple Logo
Review this article: iOS: Unable to update or restore. -
Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!
My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.
-
I am not being able to create my apple ID as my card details are not being accepted by the app store. i tried with my visa card as well as master card. help me out to solve the problem..
Were the VISA and MasterCard issued to you by a bank in the country where you reside and do they have a verifiable billing address in the same country?
Or are these debit cards that you bought in a local store. Apple does not accept debit cards that you bought. -
HT201371 Touch ID stopped working after updating to IOS 7.1.
Good morning to all,
My touch ID stopped working after updating to IOS 7.1.
It was working perfectly until the update and then it stopped recognizing my prints
I've reset the phone and deleted my fingerprints and now I can't even add a fingerprint again.
I am sure this is not a hardware problem since the phone was working perfectly before the update and it didn't fall nor anything similar.
Also the sensor is clean as well as my fingers.Same problem... I think we all should let Apple know of this issue. http://www.apple.com/feedback/ tell them the probelm. So when they get too many complains they will surely fix it ASAP with a software update.
-
IPod Touch 1st generation froze after upgraded to iOS 3.1.3
iPod Touch 1st generation froze after upgraded to iOS 3.1.3. iTunes 10.4.1 shows synced and current, but iPod frozen with logo and progress bar on screen. can anyone help? tnx.
Place the iPod in recovery mode and then try to restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
after updating to ios 6.1.3 seems my factory unlocked 3gs is not working, i cant even restore..the message displayed is "itunes software update server cannot be contacted" 'm using latest itunes with winows xp system...........please please help me
There is no such thing as a "Factory Unlocked iPhone "
They are either locked to a carrier who may at some stage offer unlocking
or sold direct to a user by Apple (from their own Stores or online .)
Those iPhones are NOT locked
Where did you get your iPhone
If from Apple try this
http://support.apple.com/kb/HT1808 -
Wen will my ipod touch 5 generation get an update to ios 8
wen will my ipod touch 5 generation get an update to ios 8
Apple has said "coming this fall", as has been pointed out here several times now as well as on Apple's web site.
Regards. -
The iphone 3GS is unable to activate after updating to iOS 6 i'm connecting it to iTunes but it says there is no SIM card which there is plz help
iPhone 3GS, iOS 6Your iPhone was "unofficially" unlocked by some means to work with a different carrier. Now that you have updated it has relocked to the original carrier. If you do not know who the original carrier was you will need to call AppleCare and give them the model and serial number of your iPhone. Then you will need to contact that carrier to see if they have a process to unlock the phone and if you qualify.
-
I have a Mac mini Snow Leopard. In Numbers the grid lines are so faint that they are barely visible. Pleease could someone help me sort out this problem?
The User Manual has this:
Formatting Table Cell Borders
You can change the line thickness and color of table cell borders. Or you can hide the border of any cell.
To format table cell borders:
1 Select the cell border segments you want to format.
2 Use the controls in the format bar or in the Table inspector.
Click to choose a stroke color.
Click to choose a stroke style.
Click to choose a line thickness.
Stroke pop-up menu: Lets you choose a stroke style. Choose None to hide borders.
Line thickness: Controls the thickness of the stroke.
Color well: Lets you choose a stroke color.
When you click the color well in the format bar, a color matrix appears. Select a color by clicking it in the matrix, or click Show Colors to open the Colors window for additional color options.
When you click the color well in the Table inspector, the Colors window opens.
User Guide: http://manuals.info.apple.com/en_US/Numbers09_UserGuide.pdf -
The app store will not load after downloading Mountain Lion.
The app store will not load after downloading Mountain Lion. Anyone else having this problem. It works on the the admins acount on the computer but none others. All of the parnetal controls are off and it doesnt work. All i get from the app store is this.
Yes. I have done everything. restarted, made sure there are no funny blocks or no permissions
-
The app store will not update my apps.
The app store will not update my apps. I keep clicking update all but it just spins for hours. I have restarted the computer and the store multiple times but it just hangs on updates. Suggestions?
De nada amigo.
Thank You for extending the courtesy of awarding points to comments that are helpful or provide answers in the Apple Support Communities, as this is not mandatory, but it is much appreciated! -
My Ipad reboots over and over again could someone help with my problem?
My Ipad reboots over and over again, could someone help with my problem?
Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo.
-
How do I fix my iPod I updated it to iOS 6 and now iTunes and the App Store will not work?, How do I fix my iPod I updated it to iOS 6 and now iTunes and the App Store will not work?
App Store Failure / Updates White Screen
Tap Settings > General > Date and Time > Set Automatically > Off. Set the date one year ahead. Then try to access the App Store.
It may be a connection issue. Try changing your DNS settings to Google’s open DNS by tapping Settings > Wi-Fi >, tap the blue arrow next to your current Wi-Fi network, and then tap the “DNS” field and enter the DNS servers; 8.8.8.8 (Google’s Public DNS, 8.8.4.4 also alternate).
Maybe you are looking for
-
Our process involves filling out a submission form, sending the data to the approval form, and then viewing that approval form. Essentially a simple submission and approval workflow. When we export the XML of the approval form to see what data was pa
-
I recently purchased a new Mac and I am having difficulty opening older Pages documents. Pages, This document can't be opened because it's too old. To open it, save it with Pages 09 first still can't open pages document
-
Error in refcursor Edited by: josh1612 on Feb 18, 2010 8:40 PM
-
VPN error when using Microsoft digital certificates.
Hi, I tried implementing site-site VPN between Cisco Router and Cisco ASA using Microsoft digital certificates. After performing the following configurations, I was not able to ping to other site LAN. I enabled debug and got following out put. I suce
-
Hello, I'm writing PL/SQL-Portlets and use the wwerr_api_error_ui.show_html procedure to display some error messages. How can I customize the layout of the generated error page? If this is not possible, how can I implement this on my own? I've tried