My ipod touch 4g will not connect to tv, will not display picture. keep getting a message saying this accessory is not supported by ipod touch, what do ido to make this work and get rid of the message i keep getting?
My ipod touch 4g 5.0.1 will not connect to tv, will not display picture. Also keep getting a message sayin this accesory is not supported with ipod touch. How do i get this to work and stop getting this message? Please help.
- What cable re you using? Digitasl, VGA, composit, componet and who made it?
- TV out only works with apps that support it. It does not morror the iPod's screen
- Have tired another TV or other display?
Similar Messages
-
Mac OS X v 10.7 Lion does not support Norton Antivirus? what to do? Buy another one?
Need advice!
Mac OS X v 10.7 Lion does not support Norton Antivirus? what to do? Buy another one?Sophos seems like the best alternative to me.
No, the best alternative is not to install any commercial "anti-virus" products. They're all worse than useless, including Sophos.
Mac OS X versions 10.6.7 and later have built-in detection of known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware.
The most effective defense against malware is your own intelligence. All known Mac malware takes the form of trojans that can only operate if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. Any website that prompts you to install software, such as a “codec” or “plug-in,” that comes from that same site, or an unknown site, is untrustworthy. A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim.
Software with a corporate brand, such as Adobe Flash, must be downloaded directly from the developer’s website. No intermediary is acceptable.
Never install any commercial "anti-virus" products for the Mac, as they're all counter-productive. If you need to be able to detect Windows malware in your files, use ClamXav -- nothing else. -
I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?
iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
iOS: Supported Bluetooth profiles
Basically it support headphones, keyboards, speakers, peer-to-peer gaming -
Upgraded my phone to iphone 6 from iphone 4. My iTunes with all my music is on a computer that no longer works and can't access the music. Will iTunes Match allow me to get my music off of my iphone 4 and put it on my iphone 6? Sorry about copying twice, new to this.
Do you have iTunes match? You need a computer to manage an iTunes match library.
Jim -
I uninstalled Norton 360 under windows xp and now I'm getting this problem that firefox will no longer load pages. IE and Outlook still work and I can access the internet with them, I can ping any website I like successfully but Firefox won't load any pages ... N
== This happened ==
Every time Firefox opened
== I uninstalled Norton 360 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; .NET CLR 2.0.50727; Media Center PC 4.0; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; InfoPath.2; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)I found a fix for this, not only firefox but several other networking programs were broken as well (Outlook and IE were ok for some reason) so I reasoned that the Norton uninstall was incomplete somehow - I had done it from the add/remove programs in the control panel. Sure enough that's not enough to release Norton's tentacles in your system, there's an uninstall tool on their website (a whole set of them actually) that managed to carve it out completely and after a restart everything was back to normal. My machines will definitely be Norton-free from now on ... N
-
My iPhone was stolen. I used Find My iPhone app to lock it and display a message. The phone has not connected to the internet to locate it. I contacted the police and they have taken my meid number. How does this work and what are my chances of getting the phone back? Are there other ways the theif can use it. I was told once they put in a new sim card and use it, whatever software the police have, it will show up.
Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes. If they do that, they'll probably keep him under surveilance for a year or so before they act.
Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
I'm sorry, but that's the way it is. -
i have been trying for three days to try and get this working , and tried a few of the forum suggestions already and this is just to try them ... so glad i haven't pais anything yet . i get the signed out loop no matter what i try
What have you been trying for three days to try and get this working???
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc. -
My question won't all fit in but it says 'My iPod Touch 4th Generation 8gb won't turn on and is frozen on the loading symbol/wheel. What do I do?'
I've had this problem from about two weeks and I forgot about it, but today I wanted to play on it and remembered that it's not working, I've tried connecting it to iTunes via my laptop but I'm not to sure how to update it because I thought that might fix it, but no luck. I've tried the trick where you hold the lock and home button but nothing happened apart from it just went back to the apple logo and then to the frozen loading symbol/wheel. I need help!Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I plugged my ipod into my computer to load up new tunes and it froaze on the time I dad connected it with the message 'do not disconnect' on the screen. Despite disconnecting and reconnecting it and ensuring it was charged up it will not operate. The 'lock' symbol is showing at the top of the screen even when I have moved the lock switch. I have been using my ipod for several years with no similar fault. What is the problem/solution?
I would first try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Next would be to restore the iPod from backup -
I purchased a song from iTunes however it will not play. I get a message telling me I need to authorize my PC, when I go through the steps as directed I get a message saying this PC is already authorized however the song still will not play. Any help?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
When I start firefox, I get a Dialogue bx saying that Firefox had stopped working and Windows is checking the cause, another dialouge box says that A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is found,the problem continues, I have Google Chrome working on my Laptop.
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See also:
* http://kb.mozillazine.org/Unable_to_save_or_download_files -
my ipod touch 4th gen home button has stopped working i have taken of the screen and tried pushing the button underneath and still not working please help
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo. -
Alo, my Macbook pro i7 2 GHz Intel Core i7 (early 2011) will not go to sleep with the power source connected. only enters sleep mode when running on battery. Someone did this happen, and it could solve?
There is no output from that command line? Maybe the pid changed.
I'll repeat what I am trying to find out...
1. You do a pmset -g on the terminal.
2. The output from that pmset should have a line that says "sleep 0 (imposed by n)" where n is some number.
3. The ps ax | grep n is supposed to display what the process associated with n is.
It's the output from step 3 that should indicate what is causing you not to sleep.
But speaking of sleep, that's where I am going. -
I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
When i connect my iPhone and iPad to my computer i get a message that says This iPhone cannot be used because the Apple Mobile Device service is not started. Any ideas??
Type "Apple Mobile Device service" into the search bar at the top of this page by "Support" and read the resulting articles.
Maybe you are looking for
-
HT201079 Am i able to use a different payment method if i am in family sharing?
I am in a family sharing group through iTunes store and app store. I do not want to charge the shared payment method, but instead pay with my own payment method. Am I able to do so? If so, How?
-
I was syncing my ipod to my itunes and the computer froze up. So I used the force shutdown by holding the power button. I then tried to turn it back on but when I did, it would play the chime and bring up the blank white screen before it shows the ap
-
My unusual (?) printer issue -- Prints only partial lines when printing in black (part 2)
I have been using my HP Officejet J4680 with my Win7 PC for several years and relatively problem-free -- until about six months ago. My printing issue might be rather odd. So odd, in fact, I'm not sure how to succinctly describe it. I'm not too t
-
Updating custom boolean attribute in Active Directory via OIM
The adapters delivered with the AD connector support updating standard attributes (string) and multi-value attributes, but I can't seem to figure out how to update a custom Boolean attribute in AD via OIM. The delivered Boolean fields all appear to h
-
I'm really just getting started with DiAdem and have the "Getting Started Guide" and the "Data Mining, analysis and report generating guide" from NI. However, they give descriptions of what can be done such as the FFT with a pretty report, but now r